Used Ikz I for sale (53,347)

Year of construction: 1995, condition: ready for operation (used), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible. Gbedpfxevnuckj Al Uou

Year of construction: 2014, condition: ready for operation (used), A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible. Godpfszp Rfyjx Al Usbu

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Gbedpfxjcr T N Ds Al Uju Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: used, mileage: 742,615 km, power: 353 kW (479.95 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2024, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Radio * Air conditioning * Two-way radio * Stationary air conditioning * Sleeper bunk * Cool box * Multifunction steering wheel ----* Adaptive Cruise Control (ACC) * Hill start assist * Lane departure warning * Adjustable fifth wheel plate ----Internal vehicle number: 8292----Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp Gbjdevhugpopfx Al Usu

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Gbsdsltmnlspfx Al Ueu Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: excellent (used), Year of construction: 2008, For Sale: Very good condition. Industrie Rex I + spreading belts + hopper with oil lubrication 5/4 row range: 40 - 100 grams Siemens S7 program Gbjdpfx Aew Ebw Ijl Ueu completely complete Videos available showing operation It is possible to inspect the machine at our location. If you have any questions or remarks, please feel free to contact us. Transport by arrangement Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Gbedpexwlthefx Al Ueu Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: like new (used), Year of construction: 2021, AUTOMATIC PALLET CHANGER Usable pallet dimensions mm2 x 650 x 400 Maximum permitted load on pallet kg2 x 250 TRAVELS AND FEEDS X axis mm 520 Y axis mm 400 Z axis mm 330 Rapid traverse X, Y mm/min 56,000 Rapid traverse Z mm/min 56,000 Working feedrate mm/min 1 ÷ 20,000 DIRECT DRIVE MOTOR SPINDLE Tool taper and shank BT30 Spindle speed rpm 12,000 Gbodpfx Alsyiu Due Uou Spindle motor power 30 min/continuous kW 7.5/5.5 TOOL MAGAZINE Umbrella-type tool magazine capacity 24 Maximum tool diameter mm 80/100 Maximum tool length mm 200 Fixed position tool selection

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, workpiece diameter (max.): 220 mm, overall weight: 7,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, workpiece height (max.): 175 mm, product length (max.): 3,120 mm, number of axes: 2, This EMAG EMAG VL5 i DSL vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. - Max. Chuck Diameter: 250 mm- Max. Swing Diameter: 270 mm- Closed Standard Automation Capacity: 16 (80...220 mm) / 10 kg; 22 (30...160 mm) / 8 kg; 37 (30...85 mm) / 4.5 kg- Max. Permissible Total Automation Load: 175 kg- Chain Length: 224 Inches- Number of Chain Links: 224- Chain Pitch: 1 Inch (25.4 mm)- Loading Time: 2-4 s- Spindle Flange (DIN 55026): Size 6- Front Spindle Bearing Diameter: 110 mm- Main Drive AC Asynchronous Motor Power (100/40% ED): 18 / 27 kW- Main Drive Torque (100/40% ED): 200 / 300 Nm- Corner Speed: 850 rpm- Rapid Traverse Rate X: 60 m/min- Rapid Traverse Rate Z: 30 m/min- Feed Force X and Z: 10 kN- Ball Screw Diameter X / Z: 40 mm- Tool Carrier: 12-position turret, Cylindrical Shank Receptacle DIN 69880 (VDI 40)- Tool Shank Diameter: 40 mm- Max. Tool Length incl. Holder: 190 mm- Max. Tool Interference Circle: 760 mm- Driven Tools Max. Speed: 6000 rpm- Driven Tools Corner Speed: 3000 rpm- Driven Tools Max. Power: 8.5 kW- Driven Tools Max. Torque (10/40/100% ED): 40 / 24 / 15 Nm- Current Supply / Current Type: 3 ~- Frequency: 50 Hz- Operating Voltage: 400 V- Control Voltage General (DC): 24 V- Control Voltage Valve / AC: 24 V (DC) / 230 V (AC)- Light Connection: 24 V- Connection Power: 36 kW- Rated Current: 64 A- Supply Fuse: 80 A- Electrical Execution Standard: VDE 0113- Length incl. Chip Conveyor: 4185 mm Additional equipment, not included • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78db(a) Extra Information Machine still under power Dimensions Machine Depth 3900 mm Gbjdpfjzg H Dysx Al Usu Technical Specification Through-spindle Coolant Yes Driven Tools Yes

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, table load 2,000 kgs, Spindle speed 12,000 rpm, Gsdpfxjzh I Ebj Al Uebu input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: used, Microcutter Inotec I 225CD 110D This Inotec microcutter is a highly versatile machine, commonly used in the sausage and pet food industries. This inline cutter processes large quantities of product at high speed, producing a homogeneous mass while effectively mixing the ingredients simultaneously. Gedszwvxhjpfx Al Ujbu The settings can be adjusted from coarse cutting to fine emulsions. The cutter is equipped with a large feed hopper positioned at a convenient working height. This allows the product to be easily fed into the machine, directly from a bowl cutter if required. The emulsifier is suitable for inline installation. The cutting set can be easily installed and removed. The cutting set experiences minimal wear, ensuring a long service life. Temperature sensors help maintain consistent product quality. The intuitive control panel allows for easy program configuration. The machine is mobile and can be moved as required. Technical specifications: Production capacity: 6,000–15,000 kg/h (depending on the product) Hopper capacity: 200 L Cutting plate diameter: 225 mm Hopper feed height: 890 mm Voltage: 400 V (3 + N, 50 Hz) Power: 127 kW Weight: 1,000 kg Year of manufacture: 2009 Machine dimensions (W x D x H): 1,200 x 2,250 x 1,300 mm

Condition: good (used), Universal tool grinding machine Gbodszx D U Tspfx Al Ueu Stock number: 3136 Manufacturer: WMW (Gotha) Year of manufacture: 1976 Type: SWU 250-I Machine number: 201/76 Working area Maximum workpiece length: 600 mm Maximum workpiece diameter: 250 mm Maximum disc cutter diameter: 360 mm Maximum grinding length: 450 mm Table Table travel, longitudinal, manual: 500 mm Table travel, longitudinal, automatic: - Table swivel: 0-90° Working surface: 120 x 950 mm Taper in the universal chuck: MK 5 Taper in the tailstock: MK 2 Grinding spindle Grinding spindle head height adjustment: 250 mm Cross travel: 230 mm Rotatable: 350° Tiltable: 15° Maximum disc diameter: 160 mm Grinding spindle speeds: 2200/3500/5200 rpm Power consumption: 1.8 kW Condition: good Accessories/Equipment: extensive accessories – see pictures Dimensions and weights Space requirement: 1,300 x 2,000 mm Machine weight: 0.9 t

Condition: used, functionality: fully functional, mileage: 173,788 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Gbodpfxozl R Hpo Al Uju Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 11 mm Front right - 11 mm Rear left inner - 7 mm Rear left outer - 6 mm Rear right inner - 6 mm Rear right outer - 7 mm

Condition: used, mileage: 186,000 km, first registration: 03/2023, fuel type: diesel, color: white, Globetrotter cab, I-Shift transmission, VEB Plus. Gbjdpfx Alozl Sqcs Uou

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Gbodpszuyi Ejfx Al Uju Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: like new (used), Year of construction: 2013, operating hours: 379 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + Model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID:26024.4241 Gbsdpfx Aozv Rzhsl Uju Category: Demo Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Capacity: 1250 kg Year: 2013 Hours: 379 hours Battery: 48 V / 750 Ah Options: - VNA truck - with wire guidance - WIDE fork carriage (L = 1200 mm)

Condition: like new (used), Year of construction: 2020, operating hours: 3,306 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID: 26078.0578 Category: Used Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Gbodpfezv R E Hox Al Uou Capacity: 1250 kg Year: 2020 Hours: 3306 hours Battery: Complete NEW * 48v / 750ah * Manufactured in 2026 Options: - Very Narrow Aisle (VNA) truck - with Wire Guidance

Condition: like new (used), Year of construction: 2020, operating hours: 3,431 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID: 26077.5577 Category: Used Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Capacity: 1250 kg Year: 2020 Gbedpozv R Hdofx Al Ueu Hours: 3431 hours Battery: Complete NEW * 48v / 750ah * Year of manufacture 2021 Options: - VNA truck - with wire guidance

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 60022, turning length: 250 mm, turning diameter: 42 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, travel distance Z-axis: 250 mm, spindle motor power: 7,500 W, total height: 1,900 mm, total length: 3,500 mm, total width: 1,900 mm, overall weight: 4,200 kg, i-42 Ultimate lathe • Number of controlled axes: 10 Godezwmknepfx Al Uobu • Number of driven tools: 12 • Max. diameter: 42 mm • Max. length: 250 mm Includes a feeder – max. length 1 m.

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5461 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance Gbedpjzv H Spefx Al Uou

Condition: good (used), mileage: 328,348 km, power: 390 kW (530.25 HP), first registration: 11/2022, fuel type: diesel, axle configuration: 6x2, wheelbase: 2,950 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2022, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, navigation system, onboard computer, retarder, soot filter, spoiler, = Additional options and accessories = - Rear work lights - Front work lights - High beam headlights - Windshield - Cab - Leather interior - Leather upholstery - Air suspension - Particle filter - Sleeper cab - Side skirts - Sun visor = Notes = Scania R530 Highline 6x2 - Show truck - BUFFL interior - Full air suspension - Retarder Year of manufacture: 2022-11-28 Mileage: 328,348 km YS2R6X20005679427 Limited special edition Full show truck BUFFL interior 2.95 m wheelbase Retarder Refrigerator Coffee machine Etc. Gbjdpezy El Aefx Al Uju = Additional information = Technical information Number of cylinders: 8 Transmission Gearbox: I-shift, 12 gears, automatic Axle configuration Suspension: Air suspension Front axle: Max. axle load: 8,000 kg; Steerable Rear axle 1: Twin tires; Max. axle load: 11,500 kg Rear axle 2: Twin tires; Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 10,427 kg Payload: 16,573 kg GVWR: 27,000 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good

Condition: excellent (used), Year of construction: 2023, AHT Lisboa Refrigerated Display Case – Island Unit Gbedpfxez Aapuj Al Ueu Used unit – Very good condition – tested and fully functional. Manufacturer: AHT Model: 2x LISBOA 210K + 6x LISBOA 250 Plug-in ready Year of manufacture: 2023 Specifications / dimensions shown in photos. Freight costs depend on the weight, the volume and, above all, the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but the further details require a telephone call, so we ask for the purpose of inquiring about the transport costs and other delivery modalities to contact us by phone. Payment in cash, possible upon handover on site We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8.00 a.m.-4.00 p.m. sat .: closed

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum floor, tiltable Features: - 2-3 motorcycles - LED lighting - Tiltable loading platform Net: €1,067.23 / Gross: €1,270.00 Article number: MGP375231500.02 Technical data: • Brand: Martz • Model: GP 3 PREMIUM • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 230 x 155 x 0 cm • External dimensions (L x W x H): 312 x 192 x 86 cm • Permissible total weight: 750 kg • Unladen weight: 193 kg • Payload: 557 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Stable frame construction • Trailer can be stored upright • Closed floor made of aluminum tread plate • Suitable for transporting 1 to 3 motorcycles • 1 ramp, steel, galvanized. - in ramp compartment • Foldable, galvanized V-drawbar • Plastic mudguards • 12 lashing points distributed on the loading platform • Maintenance-free rubber spring axle from KNOTT • 100km/h manufacturer's certificate • 13-pin connector • Large-sized LED safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been an authorized dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Gbjdpezy Afyefx Al Ueu - Subject to errors, omissions and prior sale -

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Gsdpfx Alozidi Ss Ujbu

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Gbodpey H I Hlsfx Al Ueu