Used Ima Edgebanders for sale (138)

Condition: used, machine/vehicle number: 008750, Position 1: introducer IMA-NOVIMAT/I/G80/440/R3 Position 2: Single Edgebanders IMA-NOVIMAT/I/G80/440/R3 Codpfxez Eyx Sj Acperh Position 3: Panel Return Systems IMA-NOVIMAT/I/G80/440/R3

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Cedpfxez Ekczo Acperh Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: ready for operation (used), Year of construction: 2004, IMA Bima 210 Year of manufacture: 2004 Milling area: 3000 x 1200 Crodpfsz E U A Sex Acpsh C-axis Liquid-cooled milling motor Drilling unit Vacuum pump 6 supports Schmalz vacuum cups HSK 63-F Saw unit Machine in good condition Angled unit Available at the end of December 2026

Condition: ready for operation (used), Year of construction: 2013, This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Additional information • Motor Power: 2 x 45 kW, 150 Hz • Motor Speed: 9000 rpm • Power Supply: 230 V • Heating Power: 6 x 500 watts Csdpfxezxzrvs Acperh • Adjustment Range: Vertical approx. 17 mm, Horizontal approx. 30 mm • Stroke: Max. 8 mm • Roll Diameter: Max. 850 mm • Edge Height: 14 – 65 mm • Workpiece Projection: Min. 30 mm + edge thickness, Max. 80 mm including edge thickness • Workpiece Length: Min. 130 mm • Workpiece Gap: Min. 300 mm • Workpiece Distance: Min. 990 mm • Workpiece Thickness: Min. 8 mm, Min. 12 mm with tracing wheel, Max. 80 mm • Single Tracing Workpiece Projection: Min. 30 mm • Double Tracing Workpiece Projection: Min. 38 mm for max. 4 profiles, Max. 50 mm • Cutter Head Diameter: 125 mm • Motor Shaft: 30 x 68 mm diameter • Internal Thread: M16, Depending on motor, left or right • Cutting Cross-section Motor Power: 0.20 kW, 200 Hz 400 V, 12000 rpm for max. 195 mm², Option: 0.66 kW, Extension to max. 1100 mm² • Tool Diameter: 160 mm / 48 teeth • Swivel Range: 0 and 25 degrees • Workpiece Speed: Max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge Overhang: Top edge, max. 3 mm, Bottom edge, max. 2 mm for straight edges • Edge Material: Edge, max. 4 mm for wood and plastic; Aluminum, max. 3 mm

Condition: used, Year of construction: 2005, Edge banding machine Manufacturer: IMA Type: Advantage 600 Year of manufacture: 2005 Technical data - Joint milling - Gluing unit for thin and thick edges - Imprint zone Cjdpfx Aezuyirjcporh - 2x edge trimmers - Flush trimming - Multi-function trimming unit (MFA) - Profile trimming blade - Surface trimming blade - Buffing - Return system at the upper pressure roller Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 08450, functionality: fully functional, operating hours: 15,861 h, Edge banding machine + BARBARIC LX U4 B2200 return system! The machine is equipped with the following units: Joint milling VTG gluing unit Quick-Lock glue application Pre-melting tank with automatic granule feed Cutting unit Flush/profile milling KFA-x30 contour milling unit Profile and joint drawing blades TECHNICAL DETAILS Workpiece thickness: 8–60 mm Feed rate: approx. 6–30 m/min MACHINE DETAILS Power supply: 3 N PE Operating voltage: 400 V Power frequency: 50 Hz Rated power: 32 kW Rated current: 69 A Operating hours of edge banding machine: approx. 15,861 h (as of 2023) BARBARIC LX U4 B2200 return system Year of manufacture: 2014 Serial No.: 2130742-102 Operating hours: approx. 8,997 h (as of 2023) EQUIPMENT Automatic 12-position edge magazine Crjdpfx Aezxgfzjcpjh Pre-melting tank with automatic granule feed

Condition: used, machine/vehicle number: 008662, Position 1: Single Edgebanders IMA-NOVIMAT CONTOUR I/G80/790/R3 Credpfezmmtnsx Acpoh Position 2: Panel Return Systems IMA-NOVIMAT CONTOUR I/G80/790/R3

Condition: good (used), Year of construction: 2018, machine/vehicle number: 11000-0072, functionality: fully functional, input voltage: 400 V, input current: 57 A, input frequency: 50 Hz, type of input current: three-phase, For sale is a professional, single-sided industrial edge banding machine from the renowned German manufacturer IMA Schelling, model Novimat Compact I G80 / 700 R3. Cjdpfezvyh Rjx Acperh The machine was purchased new in 2018 and has been in operation at the same facility since then. The unit is in continuous operation, regularly serviced, well-maintained, and 100% technically sound. Key information and technical condition: Year of manufacture: 2018 Power: 26kW Power supply: 400V (3 phases), 50Hz Compatible with polyurethane (PUR) adhesive; a PUR adhesive kit is included. Usage history: operated in a single-shift mode, only 8 hours per day. Condition: good, ready for immediate use.

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Crsdpfxszidi Ss Acpeh

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty Credpfjzuyqvex Acpsh - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Credpfx Ajz D A Rbocpjh Control / Software IMAWOP 5.0

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Codpfx Acjzz Ipajporh Operating Units: 13 nr

Condition: used, Year of construction: 2005, Single-sided edge banding machine Codpfxezuyhns Acpsrh Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 24406, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, input frequency: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working range (axis travel) Cedpeykn Dwjfx Acperh • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, and board nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Typical features and equipment • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling aggregate (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chips conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture commonly found in offers: approx. 2010–2016 (often 2014) • Applications: furniture production, MDF panels, HPL, solid wood, nesting

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive Crjdpfxozuyplo Acpoh - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, machine/vehicle number: 50071, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 42 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, height adjustment type: electric, feed rate X-axis: 16 m/min, actuation type: pneumatic, total height: 1,600 mm, total length: 7,200 mm, total width: 1,600 mm, overall weight: 3,700 kg, Equipment: CE marking, documentation/manual, We offer this well maintained IMA Advantage 60 edgebander, year of manufacture 2008. Machine type: Advantage 60 Serial number: 50071 Year of manufacture: 2008 Voltage: 400 V Crjdpsy Um Tmofx Acpeh Frequency: 50 Hz Electrical supply: 3 N PE Nominal power: 18 kW Nominal current: 42 A The machine has the following groups: Premilling Blow-off nozzle for removing loose particles Heating unit Gluing unit End trimming unit MFA unit for milling/corner rounding Profile scrapper Cleaning agent application unit Riepe Flat scrapper Brushes Grooving unit With two interchangeable glue pots If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, power: 41 kW (55.74 HP), edge thickness (max.): 3 mm, controller model: ICOS OPEN, The machine has the following configuration: Pre-milling unit Manufacturer model: R3 L20 Engagement control: Automatic, time-controlled Motor power: 4 kW Speed: 9,000 rpm Edge processing Number of edge processing units: 10 Crosscut saw unit Manufacturer model: 8.42/39/B Number of motors: 2 Motor power: 0.6 kW Speed: 12,000 rpm Flush trimming and rounding unit Manufacturer model: 08.055 Number of motors: 0.6 (?) Motor power: 1 kW Speed: 12,000 rpm Corner rounding unit Manufacturer model: 08.342 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Scraper blade unit Manufacturer model: 08.50 Belt sanding unit 1 Manufacturer model: 08.62 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 2 Manufacturer model: 08.062 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 3 Manufacturer model: 08 Motor power: 0.18 kW Speed: 1,400 rpm Belt sanding unit 4 Manufacturer model: 08.617-2 Motor power: 0.18 kW Csdozmtkaepfx Acperh Speed: 1,400 rpm Belt sanding unit 5 Manufacturer model: 08 Processing unit 10 Manufacturer model: 08.190 Motor power: 4.5 kW Speed: 9,000 rpm TECHNICAL DETAILS Workpiece dimensions Max. panel height: 60 mm Min. panel length: 130 mm Min. panel width: 65 mm Edge material Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Feed Max. feed rate: 30 m/min Pressure: Rubber belt Number of panel sizing/milling units: 1 MACHINE DETAILS Control system: ICOS OPEN Total connected power: 41 kW EQUIPMENT Number of panel sizing/milling units: 1 Lamps for preheating the panel side Edge roller magazine with 2 positions PUR pre-melting unit Pressure roller set with 5 pressure rollers Spraying unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 5657

Condition: used, machine/vehicle number: 008660, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Cedozmmt Uspfx Acpjrh

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Composed of the following machines: A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 Cjdpfxeun N Dlo Acpjrh B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Csdpex A Hggefx Acporh Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Crsdpfozuyqijx Acpoh Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Crodpfewuciwjx Acpoh Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st pass) machine in a line Credpfxjz Eka Te Acpsh Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm ?? / ??? Working width (min/max) mm 236 / 1300 - Working length (min/max) mm 250 / 5600 Numerical Control / Software ICOS Open (prepared for ZIMBA) Adjustable feeding speed (m/min ) 10 - 70 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.34 (2 x Kw 12,5) adjustable by N.C., with Hydro-Format-tool-system Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1570 (with Nordson VersaPUR) Pressure zone (adjustable by N.C.) Edge coils supporting unit (No. 12 reels) with servo material infeed Servo material end-trimming knife to cut the reel material Rough Trimming (Milling) unit 08.0555 HS/LS1 (2 x Kw 1) Fine Trimming (Milling) unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 0,66) Spraying Unit (for sliding liquid) Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.0516 HS/LS1 Glue scraping unit 08.522 Buffing unit 08.617-2 (2 x Kw 0,18) - Spraying Unit (for sliding liquid) No. 1 Milling grooving unit 75.34 (Left-Hand) adjustable by N.C. (1 x Kw 8) Hydro-Format-tool-system No. 2 Milling grooving unit 75.34 (Right-Hand) adjustable by N.C. (2 x Kw 12.5) Hydro-tool-system

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Codpfx Acow El Nhoporh

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Crjdpfx Ajzuw Rtscpeh Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.