Used Image Press for sale (28,589)

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Nsdex A Hfvjpfx Agzjwr Max feed speed: 40 m/min

Condition: used, Charging Box Area: Dimensions: 72" Long x 30" Wide x 19" Deep Bale Size: Maximum: 12" x 6" x 15" Minimum: 12" x 6" x 4" Average: 12" x 6" x 6" Bale Weight: Aluminum: 20-60 lbs. Stainless Steel: 20-50 lbs. Copper: 60-120 lbs. Brass: 50-100 lbs. Total Average: 50 lbs. Machine Cycle Time (Exclusive of Loading Hopper): Nwjdpfsx Np Uvox Agzor Cycle Time: 25 seconds Approximate Production Capacity (With Average Bale Weight 50 lbs): Capacity: Up to 1,152 bales (57,600 lbs or 28.8 tons) Based on an 8-hour shift and depending on loading conditions and operator. Compression Door: Total Force: 15.7 tons 1st Squeeze (Main Ram): Total Force: 48.1 tons Side Squeeze (Final Compression): Total Force: 79.5 tons Vickers Power Unit: Oil Reservoir Capacity: 275 gallons Motor: 1-30 HP 3/60/220/440 Equipped With: Skip pan and bale ejector Dimensions: Overall Dimensions: 8'9" wide plus skip pan x 15'6" long x 5' high Approximate Weight: 18,000 lbs

Year of construction: 1994, condition: good (used), machine/vehicle number: GCHREIS, SPECIFICATIONS: Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 71” Daylight Opening: 98” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Oil Reservoir Capacity: 153 Gallons Njdpfxel Ayc Ts Agzswr Motor: 25.3 Kw (approx 33 HP) 41 amps / 1755 rpm Power: 480 v/3ph/60cy Approx Floor Space required: 322.83” lr x 133.85” fb Approx Overall Height: 261.5” Above Floor: 233.8" Approx Overall Weight: 103,617# EQUIPPED WITH: Press Controls Console Top Mounted Hydraulics Roll Out Bolster (Table) Tilt Down Ram (180º) SPECIFICATIONS SUBJECT TO VERIFICATION

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Njdew Nbh Hspfx Agzjwr Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Nwedpfxoxnikls Agzor

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Nsdpfsfxx E Sox Agzjwr

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Max length workable: 2600 mm Nodpsx A Hfpofx Agzswr Max height workable: 1300 mm

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min table surface area 730x750 mm weight of the machine ca. 14 t Nedpfewz Rv Esx Agzowr

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Nsdpfxewwvx Do Agzewr Light Guards Full length top and bottom tooling

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Retraction speed 135 mm/ seg Nsdpfx Aegr Ur Rjgzswr Engine power 30 cv

Condition: like new (used), Year of construction: 2013, operating hours: 0 h, machine/vehicle number: 115929, 7 Dixi Balers for sale. In great condition Nwjdsqrtc Ajpfx Agzer

Year of construction: 1985, condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Nsdpfx Asfxx E Iegzewr

Condition: used, MANUFACTURER Fagor MODEL AND TYPE SE4-1000-4300-2400 Mechanical Transfer Press with Coil Feed (TP5) YEAR 1994 Capacity 1000 tons Bed area 4300 mm x 2400 mm Slide area 4300 mm x 2400 mm Stroke 720 mm Shut height (min) 800 mm Shut height (max) 1200 mm Speed 10 - 20 spm Adjustment 400 mm Approx. Height above floor 8296 mm Nedpfx Ageu Er Hxszswr Features Coil feed, 2 bolsters F-B onto t-track, hydraulic clamping on slide, Manual clamping on bolster Transfer Max transfer beam out 2352 mm Max transfer beam in 952 mm Distance from bolster to transfer rail 765 mm Feed height 760 mm Pitch 625, 800, 1000 Clamp in/out 225 mm Lift 0 - 200 mm Height of exit conveyor above bolster 660 – 770 mm Coil Feed Max coil weight 5000 kg Max coil width 1465 mm Coil o/d 1550 mm Coil i/d 508 mm Material thickness 0.5 – 1.5 mm Max load pitch 0 – 1000 mm Material feed height over bolster 760/850 mm

Condition: ready for operation (used), Year of construction: 1977, Veneer Press Throughfeed Press Glue Press Panel Press Bürkle HSO 240/D 280/210 Press dimensions: 2800 x 2100 mm Maximum conveying pressure: 240 T Maximum pressing pressure: 6 kg/cm² Cylinders: 6 units, diameter 110 mm + 4 smaller cylinders Stroke: 150 mm Solid plates: 40 mm Heated by hot water Machine dimensions: 2900 x 3900 x H2800 mm, 8500 kg Nwodpfx Ajx N A A Hogzjr Infeed conveyors Single owner Offered as a complete unit including conveyor belts - Max. workpiece length [mm]: 2800 - Max. workpiece width [mm]: 2100 - Press plate material: Steel - Number of cylinders [pcs]: 6 + 4 - Total working pressure [tons]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water-heated - Max. working temperature [°C]: 150 Location: ex works customer site - immediately available - System must be dismantled by the seller

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 650 mm, total width: 650 mm, total length: 670 mm, total height: 1,490 mm, type of input current: three-phase, overall weight: 400 kg, year of last overhaul: 2023, Eberhardt Optimat S Bun Divider Rounder Manual bun press for easy operation Dough input: 900 to 2800 g Floor-standing dough dividing and rounding machine Bun press with 3 rounding plates 30-piece dough divider For round and square buns Removable stainless steel dividing knives Dimensions approx.: 650 x 670 x 1490 mm (W x D x H) Connection: 400 V, 16A-CEE plug Nsdpfx Agjx N Hf Sezjwr Used machine Options: Service package Spare parts box NEW rounding plate Maintenance contract Training & commissioning Delivery service

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Nwjdpoxaz Igofx Agzor Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm Nwedotxdmwopfx Agzsr stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station *

Year of construction: 1985, condition: excellent (used), Stamping Press used in the fabricación of vehiclís, 2 fully automated lines, each consist of 5 preses, 1x1600 T, 2x1000 T, 2x500 T, with robots, can be sell as complete line or individually Nodpsfxxu Tefx Agzjwr

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection Nodjwcq Hgopfx Agzowr - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Projection: 330 mm -Operation: hand lever Nwedpfx Asw A Rzdsgzer -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

Condition: used, Year of construction: 2008, Technical details: Nodpfx Ajw Ng D Togzowr pressure: 6 t stroke: 1020 mm total power requirement: 3,5 kW Can only adjust between tips *

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system Njdpfxjx Elxvo Agzewr - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: used, Year of construction: 1988, Technical details: Nwsdpfevmht Hjx Agzsr pressure: 630 t plate thickness: 16 mm Total force (nominal): 630 to stroke: 30 - 150 mm knife-edged ring capacity: 320 t Nominal force: 160 t : 910 x 1050 mm : 900 x 900 mm dayligth: 410 mm ram adjustment: 120 mm plate width: 40 - 450 mm plate thickness: 0,5 - 16 mm : 1 - 1000 mm total power requirement: 100 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 4.50x2.20x2.80 m Press Feintool + feeding unit *

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction Nwjdpjxayl Dofx Agzor - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: used, Year of construction: 1982, Technical details: Nodjrdlgiepfx Agzowr pressure: 2,5 t