Used Impact Wrench for sale (1,259)

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Gujdpjt Dx Hbefx An Eoi Max. tool weight: 1700 kg

Condition: used, mileage: 446,000 km, power: 355 kW (482.67 HP), first registration: 10/2021, fuel type: diesel, overall weight: 26,000 kg, color: green, gearing type: automatic, Equipment: soot filter, Vehicle number: 263240 1st owner, accident-free, fully serviced according to maintenance schedule, non-smoking vehicle ---- ASSISTANCE SYSTEMS * Lane Change Warning System * Lane Change Warning System INTERIOR * Armrest on the driver's seat OTHER EQUIPMENT * ZF Intarder * ZF Intarder Additional features ----- Color / Paintwork ----- Cab color: Opal Green * Color of headlight bezel and bumper: Opal Green * Underside and sides of cab * Cab structure and fenders, Opal Green * Air intake, door handles, black * Chassis color, gray ----- Tires / Wheels ----- Steel disc wheels, silver-gray * Wheel trims without center piece, silver-gray (RAL 9006) * F1, 315/70R22.5MI XMZ 156/150 L Steering CB72-1 * R1, 315/70R22.5MI XMD 154/150 L Traction DC75-2 * R2, 315/70R22.5MI XLEZ2 156/150 L Steering AB72-1 * Spare wheel, not applicable ----- Equipment / Optional Equipment ----- Cab - Super Space Cab * Cab with air suspension * Driver's seat: Luxury Air * Passenger seat: Comfort Air * Upper sleeper bunk * Antennas: AM/FM, 2x mobile phone, GNSS Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Front: 8.00 t, air suspension, 161 N * Rear: 11.50 + 7.50 t, air suspension, SR1344 * MX-13 engine, 355 kW/483 hp, cab emblem: 480 * Emission class Euro 6 * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * Rear axle ratio 2.38 * Wheelbase 4.80 m / rear overhang 1.72 m * EAS unit on the right side * Aluminum fuel tanks 620+340 l, height 620 mm * Fuel tanks on the left and right * AdBlue tank 45 l, left chassis side * Vertical battery box, left * Technically approved GVW, max. 27000 kg * Max. total weight with drawbar coupling 53000 kg * Daytime running lights with four LEDs on each side, integrated into the headlight units * Skylights * Fog lights and turning lights function * Translucent sun visor outside in green above the windshield * LED headlights with impact-resistant Lexan lens glass * Central locking with exterior light check function * Black steering wheel with easy-grip surface * Color of interior trim, Dark Sand * Cab, interior trim, Delta black * Cooler box (42 l) with luxury handle in aluminum look under the sleeper bunk * Storage space under the lower sleeper bunk * Lower sleeper bunk with Xtra Comfort spring core mattress * Sleeping area with upper sleeper bunk with step. Gsdo Ah Nwnjpfx An Eeui * Curtains along the windshield and side windows. * Automatic climate control * ECAS remote control * Digital (intelligent) tachograph VDO DTCO * Radio/USB player. Speaker system with 2 speakers. * Standard antennas: AM/FM radio frequencies, 2x mobile phone for mobile phones, GNSS for location purposes Extra: CB antenna. * Predictive Cruise Control * Axle load monitoring * Wheelbase 4.80 m / rear overhang 1.72 m. * LED work lights 2x * Vertical battery box on the left side. Without spare wheel holder * Wheel chocks 2x * Loose wiring harness with LED side marker lights * Preparation for body systems * Analog gearbox auxiliary drive control, no gearbox auxiliary drive * Generator 120 A, batteries 2 x 210 Ah AGM. * Battery energy monitoring * Standard tool set * Auxiliary heater Slim Cool 1400 Watt * Suitable for bodies with a stacking height of 1.32 m + 1.22 m * with attachment for a forklift * Steered trailing axle ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and

Condition: used, This listing is for a Becton Dickinson BACTEC FX Blood Culture System The unit is in full working condition and ready for immediate use This blood culture system is a high-quality lab instrument manufactured by Becton Dickinson (Model: BACTEC FX). This automated system utilizes advanced fluorescence detection technology to provide rapid, reliable detection of bacteria and fungi in clinical blood samples. It features a modular, ergonomic design that supports efficient vial-activated workflow and data management, making it an essential tool for clinical microbiology laboratories. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Gedpfx Anj Agpwno Esui specifications_en: 100-240 VAC, 50/60 Hz, 8.0 Amps. Modular stack configuration (Top Unit 441385, Bottom Unit 441386).

Condition: used, Year of construction: 2023, This listing is for a 2023 Thermo Scientific TSCM17PV Controlled-Rate Freezer The unit is in full working condition and ready for immediate use This controlled-rate freezer is a high-quality lab instrument manufactured by Thermo Scientific (Model: TSCM17PV). This 17L system is designed for precise, repeatable cryopreservation of biological samples, ensuring optimal cell viability through controlled cooling rates. It features an integrated thermal printer for data traceability and is suitable for GMP-compliant environments. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Gsdpfx Anj Advdue Eeui specifications_en: Capacity: 17 L; Voltage: 220-230V; Frequency: 50/60 Hz; Amperage: 5.5A; Phase: 1; Includes integrated thermal printer.

Condition: like new (used), functionality: fully functional, fuel type: electric, Year of construction: 2020, Used crushing and screening plant for sale, backed by the Fabo guarantee; fully maintained and ready for operation. Suitable for processing soft to medium-hard stone, with a high production capacity for sand-rich output. Our plant consists of the following components: 30 m³ rock feed hopper PDK-140 primary impact crusher Cubitzer Impact crusher (secondary) 120-series tertiary crusher 2000x6000 mm vibrating screen Gjdpj Akdgrofx An Eoui 800x4000 mm conveyor belt 800x20000 mm conveyor belt 800x12000 mm conveyor belt 600x15000 mm conveyor belt 600x10000 mm conveyor belt 600x10000 mm conveyor belt

Condition: new, This listing is for a Steris CIP 100 Alkaline Detergent The unit is unused and ready for immediate use We have a large stock at this time This laboratory detergent is a high-quality lab instrument manufactured by Steris (Model: CIP 100 (1D1008)). This high-performance, phosphate-free alkaline liquid detergent is formulated for critical cleaning applications in laboratory glassware washing and clean-in-place systems. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. specifications_en: 3.78 Liters (1 Gal.); Alkaline Process and Research Cleaner; Potassium Hydroxide based; Phosphate free. Gjde Af Uuqepfx An Ejui

Condition: used, This listing is for a Thermo Scientific Multidrop Combi Type 836 Microplate Dispenser. The unit is in full working condition and ready for immediate use. This bulk reagent dispenser delivers precise, high-speed fluid handling across various microplate formats. Ideal for high-throughput screening, it features an easy-to-use interface and ensures low dead volume to save valuable reagents. Godpezgdf Isfx An Ejui Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for 1 of 2 Unchained Labs Lunatic Spectrophotometer The unit is in full working condition and ready for immediate use This spectrophotometer is a high-quality lab instrument manufactured by Unchained Labs (Model: Lunatic). The Lunatic is a high-throughput microvolume UV/Vis spectrophotometer designed for rapid concentration and purity analysis of proteins, DNA, and RNA without the need for sample dilution. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. specifications_en: Voltage: 24V, Power: 30W, Fuse: T3A, Manufactured in Belgium. Guedpfx Ans Advdhe Eoi

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINUM chassis, Jost axle assemblies 22.5" / off-road, 3 axles with air suspension, 9 tons per axle, 1st axle lift with starting aid and electric operation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tires size 385 / 65 R22.5 on STEEL rims, 2" kingpin screwed into a 10 mm thick plate, mechanical design of the trailer supports with single-sided operation, braking system according to E.E.G. standard, dual-line Westinghouse system, spring accumulators acting on two axles, and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air tanks, electrical system according to STVZO with 2 five-chamber lights, type Aspöck, 24-volt system, aluminum tipper body, hydraulic system manufactured by Edbro with approximately 2 m of hydraulic hose, 6 PVC fenders with rubber mud flaps, side impact protection, underrun protection, walkway on the frame, fully welded, long-life rubber sealing, spindle locks on the rear door, preparation for a soil compactor, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ACCORDING TO CUSTOMER REQUIREMENTS COLOR CAN BE FREELY CHOSEN +590¤ Delivery costs Guodpfsu Dvw Eox An Eei ?Images and offers are subject to change?

Condition: used, empty load weight: 5,940 kg, axle configuration: 3 axles, first registration: 03/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, Ref: F0866625 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin, * ABS, * EBS, Gedpoz S N Auefx An Eoui * Side impact protection, * Access ladder, * Multi-lock system, * Floor: Plywood floor VIN: WKESD00000866625 Tire size: 385-65 R22.5 Interior length: 13.62m Width: 2.55m Interior width: 2.48m Height: 3.97m Interior height: 1.2m

Condition: used, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/2009, loading space width: 2,480 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Construction description* Manufacturer: Schwarzmüller, Type: X303 / X-Series * 3-axle semi-trailer, vehicle class O4 * High-quality steel frame welded construction * Wheelbase 1,310 / 1,310 mm * Overall length approx. 13,840 mm * Overall width approx. 2,550 mm * Overall height approx. 4,000 mm * Fifth wheel height approx. 1,200 mm * Distance from kingpin to center of 1st axle: 6,440 mm * Track width front and rear: 1,950 mm each * 12 pairs of recessed lashing eyes according to UVV * 2 mechanical support winches at the front * Rear impact protection * 2 chock blocks * Retractable drawbar hook at the rear * Plastic mudguards * Aluminum combination rub rail * Steel underrun protection * Lateral impact protection * Spare wheel holder * Plastic toolbox * Rear marker boards Chassis* Air suspension low-loader unit * Low-maintenance drum brake axles * Lifting and lowering device * 3 axles with single tires * Tires 235/75 R17.5 140J * Steel rims 6.75 x 17.5 inches Braking system* Two-line compressed air braking system * With automatic load-dependent brake force control * With ABS and EBS * Operating pressure 6.5 bar * Spring-loaded parking brake * Parking brake on the 2nd and 3rd axles Floor* Wooden floor made of spruce, laid lengthwise with tongue and groove * Screen-printed top layer with flush outer frame Gsdpsz S R R Hofx An Ejui Body and sliding tarpaulin* Fixed aluminum hollow profile front wall * Front wall with aluminum corner posts * Bolted rear portal with aluminum corner posts * Double doors at the rear * 6 sliding center posts * 4 rows of locking slats * Bilateral plastic sliding tarpaulins * Strap reinforcement with direct tensioning buckles * Front and rear rod tensioning closure * Tensioning gear at the front * Eccentric locking mechanism at the rear * Edscha sliding tarp system "LITE" * Bilateral aluminum special guide rail profile * Light-transmitting plastic tarpaulin roof Electrical system* 24-volt electrical system * 7-chamber tail lights * Design according to EU directives Paintwork* Steel grit blasting * Zinc dust primer * Painting with 2-component commercial vehicle acrylic paint * Color of chassis and body: Gray Weights* Technically permissible total weight: 39,000 kg * Permissible total weight according to vehicle data sheet: 34,000 kg * Permissible payload according to vehicle data sheet: 27,020 kg * Unladen weight according to vehicle data sheet: approx. 6,980 kg * Fifth wheel load: 12,000 kg * Axle load: 3 x 9,000 kg

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available Immediately!!! Vehicle located at Triftstr. 29, 38723 Seesen Specially designed recovery arm with lifting yoke for lifting, towing damaged vehicles, trucks, tractor units, buses, trailers, etc. Complete hydraulic system. 3rd coat of paint HDRV (STANDARD) STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING YOKE: black, powder-coated RAL 9005 RECOVERY ARM: black, powder-coated RAL 9005 REAR SUPPORT LEGS: black, powder-coated RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, powder-coated RAL 9005, smooth on the front side. 4. Intermediate frame (STANDARD) - hot-dip galvanized - for mounting the counterweight in the front - rear part painted in body color. 5. Recovery arm (STANDARD) - lifting angle 40° (Fig. HDRV 1013) - mounting plates for main and auxiliary winch - shackles 2x15000kg - left and right side in the rear part of the arm - space for spare wheel holder on the recovery arm. 6. Lifting Yoke (STANDARD) - Area position with respect to the horizontal axis -5° / +10° - Load capacity in retracted state 20000kg - Load capacity in extended state 10000 kg - Extension 3800 mm - Reach to vehicle axle. 7. Hydraulic support legs at the rear (STANDARD) - independently controlled - maximum width -3000mm - rotatable support legs for working on asphalt and on the ground. 8. Hydraulically extendable beam No HDRV 1013 Individual extension 0 - 3000mm maximum payload 2000 - 9000kg 9. Relocation of the tank behind the cab - Relocation of the air tank behind the cab - Relocation of the battery behind the cab - Relocation of the AdBlue tank - Counterweight behind the cab on the frame in the front (weight 100kg) - Main winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T - Auxiliary winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T. 16. Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - hydraulic control block on the right side (STANDARD) - on right side, in rear storage box. 19. Connections for supplying the braking systems, transferred from the chassis - quick coupling with cable 20 meters - air pressure roller, on the left side of the superstructure, mounted over the rear axles. 21. Electric connector for trailer + trailer hitch, transferred from the chassis - Jump start 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in the cab - Camera over winch + LCD screen in the control box SCREEN: - Vibration resistance: 10G Guodjz Sithepfx An Esi - Impact resistance: 100G - Operating temperature: -30 to + 70 ° C - CE marking - EMC approval: E26. Control of EMERGENCY STOP switch - Wireless remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - small ladder - Auxiliary ladder in storage boxes. 29. Storage box opening - doors - Railing on storage boxes - stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the cab, for fork, hook, open box. 33. All edges of the storage boxes are finished with stainless steel profiles - Bunk bed mounted in storage box 35. Lighting package complies with road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED warning light bar GAMET DE LUX, 1800mm - Mounting of the warning light bar on the upper part of the superstructure - Warning light ORANGE BLTZ, 2 pieces - front mou

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902031226, empty load weight: 6,467 kg, maximum load weight: 32,533 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 90 %, color: black, Attention: The images are archive photos. The vehicle may be in use! #Chassis – haulage semi-trailer - Fifth wheel plate with replaceable 2" kingpin - Outer frame slightly inclined, new design with "Load-Lock-Profil" for attaching lashing straps - 24 t 2-speed landing gear, one-side operation, with straight lower section, with movable thrust compensation - Note: free landing leg corner clearance / free swing radius to the rear approx. 1930 mm - Pull-out ladder at rear - Side door holders - Rear underrun protection, galvanised steel - Anti-spray mud flaps according to EC - Rear corner impact protection - Pallet stop on both sides approx. 15–20 mm high, bolted design, loading height reduced by approx. 15–20 mm - Plastic toolbox Godpfx Ans Ad N Dbj Esui #Axles + suspension - Disc brake axles with 430 mm disc diameter - Laser-aligned axles/running gear – reduced tyre wear and fuel consumption - Air suspension #Braking system - 2-line air brake system - Colour-coded line routing for easy servicing - Spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS, electronic braking system with EBS socket at front - with raise & lower valve - Vehicle stability system - Axle load detection via EBS CAN bus signal, for display in the driver's cab - AAC Basic, automatic load relief on the last axle as manoeuvring aid, up to 20 km/h, can be switched off manually #Wheels and tyres - 435/50 R19.5" make at manufacturer's discretion - Steel rims, factory silver #Electrics - 24 volt, multi-chamber lamps, yellow LED side lighting - Yellow LED side lighting coupled with indicators - 2 white front position lamps - 2 white/red rear outline marker lights - Red/yellow non-interchangeable coupling heads #Floor - Screen-printed plywood approx. 30 mm thick, on longitudinal bearers for high point loading, forklift axle load max. 7100 kg #Front wall / front corner posts - 2 580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall, - "Crash-Blocker", lower inside at approx. 140 mm height with steel impact protection #Centre stanchions - 3 pairs of sliding stanchions, movable along the full length, with 4-fold insertion pockets and long pocket at the bottom - 3 pairs of stanchion positions #Insert boards - Wooden insert boards #Rear wall / rear corner posts - Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, 2-leaf, each with 2 internal turn-rod locks #Curtain - Curtain with welded-in horizontal and vertical straps - Stainless steel tensioning buckles #Roof - Fliegl-Blitz-Verdeck - Sliding roof, rear end section can be folded up, roof slides from rear to front, L-shaped roof rail for automotive industry, internal width between roof rails approx. 2 490 mm, curtain colour: white, lifetime "breakage guarantee", Roof non-elastic, minimal roof rail deflection during loading and unloading #Approval - with DEKRA inspection and expert report (acc. to §13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL, acc. to DL 9.5 and load securing acc. to VDI 2700 sheet 12 ff. - Warning sign for longer vehicle - Expert report for longer vehicle combination

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Gusdpfxo Adzhrs An Eoi Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer Guodewyiw Eopfx An Eei - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue - Pallet box lid: RAL 2011 deep orange - Note: the images are archive photos; the vehicle may still be in use.

Condition: used, fuel type: gasoline, empty load weight: 199 kg, Year of construction: 2018, Honda Petrol Gusdpfx Anoxw H Hvj Eji Hand start. Weight: 199 kg Impact force: 30kn Plate width: 50cm Forward/reverse Price: €1.700,- ex. VAT Several in stock!!

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm Gujdpfx Anoqlck Nj Esi - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver Guedpfx Anslthguo Eei * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Year of construction: 2008, condition: excellent (used), Electric heating rod Gedpfx Aolcd Szen Eoui Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Fresenius Pilot A2 Syringe Pump You are bidding on an original Fresenius Vial Pilot A2 syringe pump (often also referred to as a perfusor). This is a proven, highly precise medical table and stand device for the continuous and precisely dosed administration of medications and infusion solutions. In everyday medical practice, the device is used for the continuous, precisely controlled administration of highly effective medications, anesthetics, or infusion solutions via standard syringes. The device features a clear control panel, a digital display for rate indication, and automatic safety and alarm functions. Thanks to the pre-mounted, robust original bracket on the back, the pump can be quickly and securely attached to infusion stands, intensive care beds, or standardized medical rails. Features: - High flexibility: Automatic detection and compatibility with common 20 ml and 50 ml Luer-Lock syringes (pre-settings for BD Plastipak, Braun Perfusor, and Monoject can be read directly on the housing). - Clear control panel: Wipe-resistant, hygienic foil keyboard with a clear digital LED display for accurate rate indication. - Comprehensive safety system: Visual and audible pre- and main alarms for occlusion, incorrect syringe positioning, power failure, or low battery. - Mobility: Integrated battery for bridging patient transport or sudden power failure. Technical data: Manufacturer: Fresenius Vial SA (Vial Medical) Model: Pilot A2 Device type: Infusion syringe pump (perfusor) Syringe compatibility: Suitable for standardized 20 ml and 50 ml Luer-Lock syringes Gusdpfxj Af Uumj An Eoi Flow rate adjustable: from 0.1 to 400 ml/h Accuracy: ± 1% (drive mechanism), ± 2% (syringe) Power supply: Mains operation: 230 V ~ 50/60 Hz Battery operation: Integrated battery (for power failure/transport) Power consumption: Max. 23 VA Dimensions (H x W x D): Approx. 120 x 330 x 155 mm Weight: Approx. 2.2 kg Housing material: Robust, impact-resistant polycarbonate Safety features: Audible and visual alarm systems (e.g., for occlusion/pressure, syringe positioning, power failure, or low battery) Year of manufacture: 2014 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2013, condition: used, This listing is for Agilent Technologies 2200 Tapestation The unit is in full working condition and ready for immediate use This automated electrophoresis system provides rapid, scalable analysis of DNA, RNA, and proteins. It accelerates sample quality control workflows using minimal sample volumes Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Guedpfx Anozgfpnj Eoi Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Godpfezghrlex An Eoui Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for Zeta Plus 16NZA Encapsulated Filter System The unit is in full working condition and ready for immediate use. This high-performance, single-use depth filtration asset provides reliable fluid clarification and impurity removal for pharmaceutical and bioprocess laboratory operations. Transparency Report and Technical Audit: Gsdpfxszqf Dae An Eoui Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for Pharmacia Biotech BPG 140/500 Chromatography Column The unit is in full working condition and ready for immediate use The BPG 140/500 is a robust preparative chromatography column designed for laboratory and bioprocess purification applications. The 140 mm diameter and 500 mm column dimensions provide a substantial separation bed, with an approximate geometric volume of 7.7 litres. Suitable for protein and biomolecule purification using a range of chromatography media. Transparency Report and Technical Audit: Software and Media Disclosure: Gedpfxezqf Dte An Eoui As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for Cedrex Fluid X - xtl - CMTL-96 Mark 111 Automated Tube Labeler The unit is in full working condition and ready for immediate use This automated tube labeler is a high-quality lab instrument manufactured by Cedrex (Model: Fluid X - xtl - CMTL-96 Mark 111). Streamlines sample tracking by rapidly and accurately applying durable labels to sample storage tubes. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Gujdpfx Aozqf Eksn Eoi Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)