Used Impregnating for sale (60)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 250 h, functionality: fully functional, workpiece weight (max.): 100 kg, working width: 500 mm, transport length: 12,000 mm, feed rate X-axis: 90 m/min, feed length X-axis: 12,000 mm, working height: 300 mm, pass-through height: 300 mm, type of input current: three-phase, total length: 2,910 mm, total width: 1,300 mm, load capacity: 100 kg, overall weight: 1,000 kg, nominal power: 2.3 kW (3.13 HP), Schiele Impregmat EVO – Professional Impregnation and Coating Machine This robust industrial Schiele Impregmat EVO is a fully automatic coating and impregnation machine, designed for high-quality and loss-free impregnation, glazing, and coloring of planed and sawn wood materials.​ Ibsdpfx Agexvp Sxezef Technical Features: The machine is equipped with a patented double X-overlapping spray system, ensuring even application on all sides without material loss. With 8 or optionally 10 integrated brush stations, the EVO can safely and reliably process large cross-sections and solid workpieces. This makes it ideal for laminated beams, solid wooden beams, and board material.​ Working Range: Up to 500 x 300 mm maximum workpiece dimensions (optionally up to 500 x 500 mm available). Minimum workpiece length approximately 600 mm. The feed speed is variable, about 10-60 m/min., with a working height of approximately 900 mm.​ Materials and Durability: The entire frame is made of stainless steel (SS), aluminum, and plastic for contact surfaces, providing extreme wear and corrosion resistance. All drive elements are externally mounted and protected against corrosion. The brush movements are lateral and mounted on the top, preventing medium from entering the drive mechanism.​ Applications: Suitable for water-soluble impregnation and paint media, salts, oils, tints, and thin-layer varnish with a maximum viscosity of 25 seconds DIN 4 jar. Also suitable for solvent-containing materials.​ Efficiency: Special overflow nozzles ensure ideal saturation of all hard and soft wood areas. Filtered material is returned to the circuit, resulting in material savings and cost efficiency.​ Advantages: This machine is known for its precision, consistent production quality, and reliability. Automated impregnation results in uniform finishing and minimal material waste. Suitable for professional woodworking companies, window frame manufacturers, and building material suppliers.​

Condition: new, Year of construction: 2025, functionality: fully functional, The Ceetec P40 is the smallest machine in the brush coater line and is particularly suitable for use in smaller craft workshops, painting studios, carpenter’s shops, and builders' merchants. It enables fast and consistent coating of both straight and profiled elements. Its straightforward design makes the device exceptionally easy to operate. This model is especially popular among manufacturers of timber houses. Its compact dimensions make it easy to transport the unit to the construction site. Thanks to the use of conical brush heads, optimal surface finish quality and high repeatability of results are ensured. The machine is designed for water-based products – it is not suitable for use in ATEX zones. Accessories Optional additional equipment is available, including roller tables, bag filters of varying thickness, and horsehair brushes. TECHNICAL DATA: Ibsdpfx Agjxp E A Tszjf Maximum cross-section of workpieces: 25 x 175 mm or 40 x 100 mm Min. workpiece length: 800 mm Power supply: 3 x 400 V + PE, IP65 rating Power: 0.37 kW Throughput: up to 1,400 m/h Machine weight: 115 kg ADVANTAGES OF THE CEETEC P40: Small, handy, wheeled model Perfect for coating facade boards, decking boards, and soffit boards Quick adjustment of working width and easy paint changeover Fast payback time Fitted with rubberised transport wheels

Condition: used, Impregnation bath or dipping bath Wichmann type 13,000 L for soaking / dipping of whole wood packages with hydraulic lift and circulation pump. Package size: max. 590 x 100 x 120 cm length: 6.000 mm Ibedpfjx Hf Hcex Agzef width: 2.200 mm height: 3.250 mm Filling quantity: max. 13,000 L

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Iedpfxsx Avn Ts Agzjbf Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Additional title: impregnation plant Capacity: 20000 l/h Iedpfx Aoxzqufsgzebf Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! Ibsdsx Aktwepfx Agzof - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. Iodsxxyigjpfx Agzobf The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Ibsdpfx Agjwx Dcyozef Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. Ibjdpfxjxrpmze Agzef High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Ibodpfx Aex Auuxsgzof Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Iedpoxzqt Iofx Agzsbf Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; Ibjdpsx Akq Nefx Agzsf - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.

Condition: like new (used), Year of construction: 2019, Partial area dryers IWT, widely used in the automotive industry, Isdpfx Agsxxa Nmjzebf

Condition: new, 10000 kg length 6000 mm width 2000 mm loading area height 650 mm Heavy-duty trailers - industrial trailers, available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood Ibodpfx Agot Dqv Uozsf - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 24 m³, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, HIRE PURCHASE * LEASING* FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8  MY24  Wheelbase 4100 mm, single rear axle wheels Color: white (Iveco 50105) EURO 6 Engine: capacity 3.0 liters Maximum power 176 HP (130 kW), maximum torque 440 Nm in the range of 1600 rpm, 4 cylinders in a row, Variable geometry turbocharger VGT Gearbox: 8-speed automatic Braking system: discs on both axles (ventilated at the front) Electrical installation: 12V, Tires / wheels: 225/65 R16C, single rear axle wheels Front suspension: independent with torsion bar integrated with the telescope Double acting shock absorber Rear suspension: rigid Beam, leaf springs with bumpers, stabilizer. Hydraulic telescopic shock absorbers Two-way action Axle pressure: front 1900 kg, rear 2240 kg Driving safety is ensured by the following systems: ESP 9, ASR, ABS, EBD, Hill Holder, MSR, HBA, LAC, TSM, RMI&ROM Above-average equipment: COMFORT PLUS: ? NAVI MY IVECO infotainment system with 10-inch display ? Attack cruise control (ACC) with radar sensor ? Cabin ventilation and heating system with automatic air conditioning ? Padded comfortable driver's seat (3 adjustment levels, lumbar support, armrest) ? Front fog lights ? USB A+C socket on driver and passenger side ? Full headrests covered with memory foam, Daily logo ? Fixed 2-seater passenger bench with folding table, 3-point seat belts STYLE: ? Daily radiator dummy with chrome strip ? Leather steering wheel ? Full LED lights (day, dipped beam, road) Additionally, the price of the vehicle includes: 73024 - Side mirrors on the shoulders 2.35 m 06064 ? Double parabolic springs for models Building type: International.   Approximate dimensions: Ibodovpcu Rjpfx Agzjf - Intr. length 5000 mm, - Internal width 2250 mm, - Internal height 2350 mm, Standard equipment: ? Intermediate frame with ground binding: aluminum stays + aluminum crosses ? Anodized aluminum sides with a height of 400 mm on Sunday, over 3600 mm length internal split buildings ? Climbs for quick disassembly and side loading ? Aluminum frame under the tarpaulin lined with impregnated wooden slats ? Flooring with 15 mm thick waterproof non-slip plywood ? Plastic wheel arches with anti-mud aprons mounted above the rear axle wheels ? Entrance step on the rear ? Front wall of the side + impregnated wooden boards ? Fasteners made of anodized aluminum ? Contour handles that prevent the load from moving during transport, the amount depends on the length of the installation ? Tarpaulin in any color, translucent roof (close with a cable) ? Foldable side anti-run slats (set) Additional equipment included in the price: ? 1-sided sliding tarpaulin with tension ? Sleeping cabin (TopSleeper) CARPOL ELKA ? Rolled rear tarpaulin ? Toolbox ? Water tank ? Auxiliary heater ? Rolling rear tarpaulin Welcome to carmax24 Today you have the opportunity to purchase one of our selected, tested vehicles. Expert-tested and high-quality vehicles ensure high customer satisfaction and have done so since 2008. This is our daily approach, because you as a customer are our number one priority at carmax24

Condition: used, Power: 1 kW (2 HP) Volume: 500 l Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at con Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : – 1 Barg Max temperature : 200°C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature : 200°C Other Sold with platform + stairs + feed hopper. Isdpex Arylsfx Agzobf

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Iodpfx Aonl Nqqsgzjbf Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: used, Flood nozzle zone: - 8 pieces, 3 flood nozzles, adjustable, from above - 10 pieces, 3 flood nozzles, adjustable, from below - Material-carrying parts made of stainless steel - With pump unit for the flood nozzles Ibsdpfou Tttyex Agzsf Drying zone: - Air circulation fan with soundproof housing, dimensions 1190x1190x1170 mm - el. power 15 kW, connection diameter DN 300 mm - Air circulation system incl. fan (see pdf.) - 4 nozzles, each 1300 mm wide, for drying from above, adjustable - 4 nozzles, each 1300 mm wide, for drying from below, adjustable Transport system: - Transport system Stainless steel disk roller conveyor Technical data: - Manufacturer Finnrose - Type. Impregnation 1300 - Year of construction 1999 - Working width 1,300 mm - Max. Part height 300 mm - Shortest part length 300 mm - Length 4,000 mm - Width 1,860 mm - Height 2,200 mm - Location, in stock

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t Ibsdjfrzvwspfx Agzef dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 35000 kg length 7000 mm width 2500 mm height 600 mm lenkbar lenkbar size of tyres 8 Stk. 450 x 300 mm weight of the machine ca. 3,9 t dimensions of the machine ca. 8,9 x 2,5 x 0,6 mm Heavy load trailer with - double steering Ijdpfx Agjfrzv Tozebf - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 6000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,6 t dimensions of the machine ca. 7,2 x 2,45 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance Iodpfxovn Uxfo Agzobf - Reversible drawbar, Length 1200mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 10000 kg length 5000 mm width 2000 mm height 725 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 1,2 t dimensions 6,7 x 2,0 x 0,6 m Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Ibsdpfx Agefrzvaszef Would you like other loads and dimensions? Please contact us.

Condition: new, 20000 kg length 8000 mm width 2450 mm height 850 mm lenkbar lenkbar size of tyres 540 x 300 weight of the machine ca. 2,95 t dimensions of the machine ca. 7,6 x 2,5 x 0,85 mm Ibjdsfrzvtopfx Agzsf Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height

Condition: new, 30000 kg length 7000 mm width 2450 mm height 800 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Iedpfsqux S Sjx Agzjbf Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Ibsdjfrzvzjpfx Agzef Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.