Used Impregnation for sale (70)

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Additional title: impregnation plant Iedpfoxzqufsx Abvjau Capacity: 20000 l/h Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Base construction: mounted on stainless steel frame Iaedpfxoxzqt Is Abveu Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: new, 20000 kg length 6000 mm width 2450 mm height 697 mm lenkbar lenkbar size of tyres 450 x 300 weight of the machine ca. 2,8 t dimensions of the machine ca. 7,2 x 2,5 x 0,7 mm Heavy load trailer with Iaedpfx Aovn Ux Ejbvju - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Iaedsy H I Hlopfx Abvsu

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Weights: * Gross vehicle weight (permissible): 24 t * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle Iaodpfx Abey Aug Reveu * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Ijdpsy Auhnsfx Abveau Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Iodpfx Asx R A Tnsbvoau Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Type: coating machine Iasdpfxex R A Rgo Abvju Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: used, Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at con Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : – 1 Barg Isdpfx Aex R Anxebveau Max temperature : 200°C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature : 200°C Other Sold with platform + stairs + feed hopper.

Condition: new, 10000 kg length 6000 mm width 2000 mm loading area height 650 mm Heavy-duty trailers - industrial trailers, available immediately from stock Frame: Iasdpot Dqv Ujfx Abveu - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.

Condition: new, 16000 kg length 6000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering Ijdjhrrp Repfx Abvsau - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Iasdpfx Aerhidmobvsu Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm Iodpfx Asw I Hqwjbvjau weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: Iedpfxoxxyigo Abvoau - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Isdpexrpmzofx Abvsau Stock number: 0981

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Iodpfxsymxqao Abveau Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, 20000 kg length 8000 mm width 2450 mm height 850 mm Iasdpfx Absfrzvtovsu lenkbar lenkbar size of tyres 540 x 300 weight of the machine ca. 2,95 t dimensions of the machine ca. 7,6 x 2,5 x 0,85 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height

Condition: new, Year of construction: 2025, functionality: fully functional, suction capacity: 1,100 m³/h, Welding Fume Extraction, Dust Extraction, Self-Cleaning, Pneumatic with Vacuum Filter. Iedpfx Asnabuzsbvoau This unit is designed for the extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated primary filter element regeneration. Contaminated air passes through a metal pre-filter (spark arrestor), a main filter cartridge, and a discharge filter made from activated carbon-impregnated fleece. The regeneration of the main filter element, which utilizes compressed air to clean the filter cartridge from accumulated contaminants, is equipped with its own 10-liter compressed air tank. The unit is recommended for applications requiring continuous extraction and filtration of airborne pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. The illustrated EC model is characterized by the following features: - Fan with brushless EC motor and 0.78 kW inverter, sound-insulated - Advanced next-generation EC motor design – ensures energy efficiency, precise speed control, and quiet operation - Reliable induction motor – robust and reliable solution that guarantees high performance and trouble-free operation even under demanding conditions Maximum Capacity: 1,100 m³/h Automatic filter cartridge cleaning Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood diameter 315 mm) Three filtration stages: • Coarse pre-filter (30% metal content, G2) • Main cartridge filter with 99% separation efficiency for particles ≥ 0.5 µm • Coarse final filter (70% activated carbon, G4) PTFE membrane filter (filter class F9) Coarse dust container below pre-filter Grid and dust container below main filter Welded steel enclosure with powder coating Noise level: 64 dB(A) Various configurations available to meet customer requirements. Applications: - Welding shops - Metalworking industry - Grinding and polishing stations - Plastics processing and machining This unit is ideal for environments that require constant and effective filtration of dry dust from the air. Made in Poland. The listed price applies to the model shown. Machine warranty: 12 months

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem Iodperhilxefx Abveau o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: new, 6000 kg length 3000 mm width 1600 mm height 570 mm fest lenkbar Iaedsygx Apjpfx Abvsu size of tyres 406 x 127 mm dimensions of the machine ca. 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Need other load capacities and dimensions? Please contact us.

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation Iasdpfjfrzvwsx Abvju - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 35000 kg length 7000 mm width 2500 mm height 600 mm lenkbar lenkbar size of tyres 8 Stk. 450 x 300 mm weight of the machine ca. 3,9 t dimensions of the machine ca. 8,9 x 2,5 x 0,6 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. Iajdjfrzv Tjpfx Abveu

Condition: new, 10000 kg length 5000 mm width 2000 mm height 725 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 1,2 t dimensions 6,7 x 2,0 x 0,6 m Iedpfx Ajfrzvaebvjau Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us.

Condition: new, 15000 kg length 6000 mm width 2450 mm height 625 mm lenkbar lenkbar size of tyres 425 x 260 mm weight of the machine ca. 2,6 t dimensions of the machine ca. 7,2 x 2,45 x 0,625 mm Iaedpfx Ajvn Uxfebvou Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1200mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us.

Condition: new, 30000 kg length 7000 mm width 2450 mm height 800 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm Iaedoqux S Sspfx Abvsu weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.