Used Indexers for sale (1,252)

Condition: used, Year of construction: 2007, number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm Godpfjzaf Hujx Akyeuc control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Gsdpfxszablto Akysuc Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: excellent (used), Year of construction: 2002, Technical Data WEILER E90 x 6000 precision lathe with cycle automation. The machine is in very good condition, considering its age. Maintenance has been documented. The Brio milling attachment allows for milling operations such as hexagon milling and the milling of grooves. Year of manufacture: 2002 Control system: Siemens Work area: Swinging diameter over bed: 900 mm Swinging diameter over cross slide: 530 mm Bed width: 600 mm Turning length: 6000 mm Spindle and drive: Spindle bore: 128 mm Spindle diameter in the front bearing: 178 mm Guodpfozagkhsx Akyoc Speed range: 1 to 1120 min⁻¹ Main drive with 2-stage gearbox: 45 / 37 kW Tailstock: Quill diameter: 140 mm Quill stroke: 300 mm Internal taper: MK 6 Dimensions and weight Machine weight: 13,000 kg Dimensions (L x W x H): 8400 x 2600 x 2150 mm Equipment and accessories: Indexing device for main spindle Milling attachment Brio BF90, mount: SK50, drive power: 11 kW Turret with quick-change tool holder Heidenhain linear scale in the X-axis Chip conveyor Many tools, including tool holders, supports, steady rests, 3 x 3-jaw chucks (900 mm, 600 mm, 300 mm), drills, and other accessories – see photos.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Guodpfxezaan Tj Akyjc Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 2036, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, overall weight: 600 kg, rotational speed (min.): 2,000 rpm, rotational speed (max.): 10,000 rpm, table length: 500 mm, table width: 200 mm, power: 2 kW (2.72 HP), Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Machine number: 2036 - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 10 A - Connection: 2 kW - Grinding wheel diameter: max. 125 mm - Speed: 2,000–10,000 rpm - Table dimensions: 500 x 200 mm WORKING AREA & CAPACITY: - Indexing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Workpiece diameter between centers: 338 mm - Workpiece diameter, overhung: 600 mm - Distance between centers: 950 mm - Internal taper, indexing spindle: Morse 4 / Unified 40 - T-slots, machine base: 12 mm - T-slots, additional elements: 8 mm TRAVEL DISTANCES & ADJUSTMENTS: Gusdpfxowxrf Ns Akysc - Sharpening stroke: 190 mm - Cross travel, tool holder: 100 mm - Vertical adjustment, grinding head: 325 mm - Axial adjustment, grinding spindle: 5 mm - Tool holder: 230 mm - Grinding head mounting: 800 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting: 360° - Grinding heads: 360° - Tool holder: 360° - Universal device (horizontal/vertical): 360° OTHER FEATURES: - Spiral grinding/slotting lead: 0.80 mm - Maximum spiral sharpening length: 190 mm DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speeds: 4,000 / 8,000 rpm (pole switching) - Stepless DC: 2,000–10,000 rpm - Grinding wheel diameter: max. 125 mm - Cutter wheel diameter: max. 200 mm ACCESSORIES: - Includes two-axis digital readout - Extensive machine accessories included

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: ET1PA23085067157, This is an Ultravent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, manufactured in 2023. It is suitable for the following Index series: Index H and I, as well as for DUO appliances or individual units. This hood not only captures escaping vapors but also eliminates odors and smoke. You do not need an exhaust duct to the outside. An LED lamp automatically indicates when you need to change the filter. This model features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter, which is the heart of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be optimally used in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC 61/101 WE units can be carried out with little effort. The hood has been inspected in our in-house workshop, and new ACTIVATED CARBON FILTERS have been installed. Fully functional with a 6-month warranty. Immediately available, list price approx. €9,000 gross. Our special price: €4,998 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 854 x 1226 x 628 mm Minimum dimensions of the door opening for transport: W x H: 845x850mm Serial number: ET1PA23085067157 Year of manufacture: 2023 Power connection: V: 200 - 240 / Hz: 50-60 Weight: approx. 95 kg Condition: Used, inspected, fully functional. Godpfowmdkmsx Akyouc Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, Serial No. 15-6139B, CNC control with touch display, indexing feed conveyor, robot by Yaskawa, type YR-MH00012-A00, year 2011, robot controller DX200, Teach-in terminal, box unloading section, L 7,000 mm, switch/control cabinets, plexiglass enclosure, peripheral units, machine accessories. Subject to prior sale. Guodpfx Akey A In Usyec

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm Gjdpexduclsfx Akyjuc - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, The Multivac R245 thermoformer is designed for the fast and efficient packaging of both food and non-food products in plastic packaging. This packaging machine is equipped with both a top and bottom labeling system, providing a complete packaging and labeling solution in a single production line. The Multivac MR625 OP cross-web top labeler applies labels to the top side of the package and is suitable for various label formats as well as the labeling of uneven package surfaces. The Multivac MR635 UP bottom labeler applies labels to the underside of the package. The machine is also fitted with a Multivac MR299 printing system, allowing the installation of an inkjet printer for printing up to four lines of text. The printing system supports both longitudinal and transverse printing directions. Trim waste film from the sides of the package is cut into small pieces by an integrated shredder and subsequently extracted into a collection bag via the machine’s suction system. This thermoformer is equipped with an integrated Dansensor 8000-2 MAP gas mixer, which precisely blends the gas mixture used for Modified Atmosphere Packaging (MAP). In addition, the machine features a stretch preheating station, enabling the processing of pre-printed bottom film without distortion of the printed material during the forming process. The machine is constructed entirely from stainless steel, ensuring durability, easy cleaning, and compliance with stringent hygiene requirements. Guedpfx Aezcragokyjc Features Vacuum packaging MAP (Modified Atmosphere Packaging) Technical Specifications - Production capacity: up to 10 cycles per minute - Equipped with a Multivac HMI touchscreen control panel - Supplied with format set 3.2 - Tray cavity dimensions (internal): approx. 113 × 182 mm - Package dimensions (external): approx. 127 × 195 mm - Film type: rigid film - Film width: 420 mm - Index length: 390 mm Registration mark sensor for top film Loading area length: 2,663 mm Equipped with 2 × Busch vacuum pumps, 300 m³/h each Equipped with 1 × Busch Panda Roots booster pump, 500 m³/h Equipped with 3 die-cutting stations Equipped with 2 QRF rotary knives Intralox discharge conveyor belt Utility Requirements Water supply pressure: 1.5 – 4.5 bar Compressed air pressure: 7 – 10 bar Electrical Data Voltage: 400 V (3+N, 50 Hz) Power consumption: 26.5 kW General Information Weight: 4,000 kg Year of manufacture: 2009 Machine dimensions (W × D × H): 12,000 × 1,880 × 2,350 mm

Condition: used, Year of construction: 2016, x-travel 4.500 mm y-travel 1.300 mm z-travel 1.800 (2.300) mm control iTNC 530 HSCI Heidenhain tool taper ISO 50 DIN 69871 AD spindle turning speed range 20 - 6.000 U/min spindle drive 43 kW Torque 900 Nm table surface area 6.000 x 1.100 mm T-slots 6x 22 H12 mm T-slots REF: 1x 22 H7 mm T-slot - distance 140 mm number of toolpositions 40 pos. tool taper ISO 50 DIN 69871 max. tool diameter 125 mm max. tool-dia with free toolbox 250 mm max. tool length 400 mm max. tool weight 20 kg tool changing time 10 sec rapid traverse ( X / Y / Z ) 35.000 mm/min Feed force ( X / Y / Z ) 16.000 N Accelaration X: 1 | Y:1,5 | Z: 2 m/s² total power requirement 57 kW CNC Fixed-Bed Milling and Boring Center SORALUCE - SLP 6000 - Automatically indexing milling head with 0.001° x 0.001° indexing in two planes - Tool clamping force: 20,000 N - "Dynamics Active Stabilizer" preparation - Dynamic Collision Monitoring Software (DCM) - Interpolation turning - INA linear roller guide system RUE55-E-L (X/Y/Z axes) - Hydromechanical damping slides (Y/Z axes) - Rack-and-pinion drive (X-axis) - Ball screws (Y/Z axes) - Heidenhain AC drive motors with digital drive technology - Pressurized direct linear measuring system (Heidenhain) - 3D thermal expansion compensation for all milling head positions - Automatic feed control - Enhanced accuracy via Soraluce 3D milling head compensation - Preparation for NC rotary table (for 5-sided machining) - Tool changer function: loading and unloading during automatic operation - Adaptive Control - Accura Heads option - DXF converter Guedpfxjy Umagj Akyjc - Heidenhain interpolation turning - Splash guard enclosure (2x front doors, 2,500 mm)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table load: 750 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 120, number of axes: 4, This 4-axis Matsuura H.PLUS-500 was manufactured in 2008. It features a continuous table with 7 ground pallets, X, Y, and Z-axis travels of 800 mm, and a B-axis with 360° continuous indexing. The machine has a maximum workpiece diameter of Ø850 mm and a maximum workpiece height of 1050 mm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-500 horizontal machining centre we have for sale. Contact us for further details. • Axes/Travels: B-axis 360° (continuous/indexed) • Pallet system: 2 pallets; pallet size 500 × 500 mm • Workpiece capacity: max diameter Ø850 mm; max height 1050 mm Gujdpfx Ajy U Hndekyjc Additional equipment • Continuous table • 7 ground pallets Technical Specification Taper Size BT 40

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete Gujdpjza Hidsfx Akysc • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: used, Spindle diameter 50 mm Spindle length 320 mm engine 2 x 11 kW und 3 x 3 kW For profiling and milling windows, doors, individual parts, and similar items with circumferential profiles, including return transport. Units: Gsdpolf H Susfx Akyouc 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic. 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Condition: new, Year of construction: 2025, Horizontal CNC Turning Machine HTC200 II x 560 C2023030332 Working Area: Max. swing over bed: Ø620 mm Max. swing over carriage: Ø410 mm Max. turning diameter: Ø400 mm Max. turning length: 560 mm Spindle center height: 1035 mm X-axis travel: 215 mm Z-axis travel: 615 mm Motorized High-Speed Spindle Max. spindle speed: 4,500 rpm Spindle power (continuous/30 min. overload): 11/15 kW Spindle torque: 157/211 Nm Spindle nose taper: DIN55026 A2 6 Spindle bore: Ø66 mm Spindle bearing diameter: Ø100 mm Chuck size: 8 inch Turret Turret type: Servo V12 OD tool size: 25x25 mm ID tool size: Ø40 mm Indexing time (tool-to-tool): 0.2 s Tailstock Tailstock type: Hydraulic Quill diameter: Ø100 mm Center type: MT 04 Quill stroke: 122 mm Tailstock travel: 550 mm Feed Shaft X/Z axis travel: 215/615 mm Rapid traverse X/Z axis: 24/30 m/min Guideway type: Linear guideways X/Z axis drive power: 1.8/1.8 kW Control System: FANUC 0i-TF Power supply: 35 kVA Coolant tank capacity: 240 l Machine weight: 4.8 t Machine dimensions (LxWxH, without chip conveyor): 3,097 x 1,855 x 1,755 mm Components Control system: FANUC X/Z-axis ball screws: PMI (TW) Spindle bearings: NTN/NSK (JP) Spindle angular contact bearings: FAG (GE) Chuck and cylinder: STRONG (TW) Guodpfx Aew Rpa Tekysc Servo turret: HISION (CN) Main hydraulic pump and valves: NACHI (JP) Primary lubrication system components: LIUBIAN (CN) Main electronic components: Schneider

Condition: new, Year of construction: 2025, Horizontal CNC Lathe HTC200 II x 560 C2023030141 Working Area: Max. swing diameter over bed: Ø620 mm Max. swing diameter over carriage: Ø410 mm Max. turning diameter: Ø400 mm Max. turning length: 560 mm Spindle center height: 1035 mm X-axis travel: 215 mm Z-axis travel: 615 mm Motorized High-Speed Spindle Max. spindle speed: 4,500 rpm Spindle power (continuous/30 min overload): 11/15 kW Spindle torque: 158/211 Nm Spindle nose taper: DIN55026 A2 6 Spindle bore: Ø66 mm Spindle bearing diameter: Ø100 mm Chuck size: 8 inches Turret Turret type: Servo V12 Guodpfxsw Rpcho Akyec OD tool size: 25x25 mm ID tool size: Ø40 mm Indexing time (tool to tool): 0.2 s Tailstock: Tailstock type: Hydraulic Quill diameter: Ø100 mm Quill taper: MT No.5 Quill stroke: 122 mm Tailstock travel: 550 mm Feed Shaft X/Z-axis travel: 215/615 mm Rapid traverse X/Z-axis: 24/30 m/min Type of guideway: Linear guideway X/Z-axis drive power: 1.8/1.8 kW Control System: FANUC 0i-TF Power supply: 35 kVA Coolant capacity: 240 l Machine weight: 4.8 t Machine dimensions (LxWxH, without chip conveyor): 3097x1855x1755 mm Components Control: FANUC X/Z-axis ball screw: PMI (TW) Spindle bearings: NTN/NSK (JP) Spindle ball bearings: FAG (GE) Chuck and cylinder: STRONG (TW) Servo turret: HISION (CN) Main components of pump and valves: NACHI (JP) Main lubrication system components: LIUBIAN (CN) Main electronic components: Schneider

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,600 mm, turning diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-16/20R with Fanuc 31i-B Table Diameter: Ø1,600 mm Max. Swing Diameter: Ø2,000 mm Max. Turning Height: 1,600 mm Table Speed: Max. 250 rpm Table Load Capacity: 8,000 kg Table Indexing Speed: 720°/min Table Indexing Accuracy: 0.001° X-Axis (Ram horizontal): -100 mm to 1,170 mm Z-Axis (Ram vertical): 900 mm Drive Spindle Speed: Max. 2,000 rpm Ram Size: 240 mm x 240 mm Milling Spindle Taper: ISO 50 Tool Shank Size: 40 mm x 40 mm Crossrail (vertical travel): 250 mm x 3 stages (hydraulic) Table Drive Motor: AC 37/45 kW (continuous/30 min. duty) Milling Spindle Drive Power ISO 50: 15/18.5 kW (continuous/30 min. duty) Guedpfxoxp Nb Tj Akyjc Control System: Fanuc 31i-B Display Unit: 15-inch TFT-LCD Memory Capacity: 1 MB Automatic Tool Changer: 24 positions (for 7 turning tools + 1 cover + 16 milling tools) Standard Tool Holders: New 240 TCR-01 (2 pcs) Splash Guard: Table version (R-Type standard design) External Coolant System: 3 bar (80 l/min) Chip Conveyor: Hinged belt type Table Bearing Cooling Device 4-Jaw Independent Manual Chuck Foundation Anchor Bolts / Base Plates Maintenance Tools and Toolbox Hydraulic Power Unit Work Area Lighting Signal Lamp: 3 colors (green, red, yellow) Operating Manuals (English): 1 CD with Fanuc manuals and 3 books with mechanical/electrical manuals Power Supply: 220 V, 60 Hz, 3-phase Machine Color: Manufacturer standard OPTIONAL ACCESSORIES (#1) Turning Tool Holder: Type 240TCR, 4x included Rigid Tapping: 1x included OPTIONAL ACCESSORIES (#2) Automatic power-off for N.C. - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3-phase - on request Linear scales X-, Z-axis (Fagor, Spain) - on request Workpiece measuring device - on request Tool measurement TS27R, Renishaw - on request Other information: INSTALLATION, COMMISSIONING, TEST OPERATION, AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Image shows machine with pallet changer. The offered machine DOES NOT INCLUDE A PALLET CHANGER! Errors in technical data excepted. The scope of accessories is as described in the text of this article only. There is no entitlement to any other accessories, such as those shown for illustration purposes. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Guodsxqb D Njpfx Akyjc Main spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls Godpfx Asfkmr Sskysuc 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, number of axes: 3, This 3-axis Wenzel LH 87 CMM machine was manufactured in 2014. It features a measuring range of 800 mm in X, 1000 mm in Y, and 700 mm in Z, with a maximum component weight capacity of 800 kg. The machine is equipped with an air-bearing system across all axes and a Renishaw PH10M Plus motorized indexing probe head. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 87 CMM machine we have for sale. Contact us for further details. Gsdpfx Akey Uvtveysuc - Volumetric Length Measuring Error (E0, MPE): 2.2 µm + (L / 300.0 mm) µm- Length Measuring Error along Optical Axis (E150, MPE): 2.2 µm + (L / 300.0 mm) µm- Max. Component / Workpiece Weight: 800 kg- Axis Bearings: Air-bearing system integrated across all axes- CNC Control Unit: WPC 3-axis contouring configuration- Controller Hardware: WPC2040 Basic combined with Renishaw PHC10-3 PLUS controller rack unit- Machine Control Panel: Wenzel HT400 wired manual joystick control handbox- Probe Head System: Renishaw PH10M Plus motorized indexing probe head- Probing Sensor System: Renishaw TP200 high-precision strain-gauge touch-trigger probe- Change Rack System: Renishaw SCR200 6-port autonomous stylus changer bridge (5 ports actively equipped in visual configuration)- Active Stylus Configurations (on-rack):* Port 1: Taster 1001 (Ø 1.00 mm)* Port 2: Taster 2001 (Ø 2.0 mm Cylindrical)* Port 3: Taster 3001 (Ø 2.00 mm Ruby Ball)* Port 4: Taster 4001* Port 5: Port 5 configured (Visual confirmation: angled/star setup)- Evaluation PC Hardware: Fujitsu Esprimo Desktop PC Tower housed in a dedicated lower-desk controller bay compartment- Visual Workstation Monitors: 2 x BenQ 24" TFT flat screen displays- Input Peripherals: Wired keyboard, mouse, and Wenzel-branded workflow mousepad- Core Operating System: Windows 10 Pro (Version 10.0, Build 19045, 64-bit Edition)- Metrology Software Suites:* Wenzel WM | Quartis Standard (Build R2025-1 / R2025-2 back-compatible ecosystem)* CM Wenzel CNC Control Geometry Software Module* CM Wenzel CNC Free-Form Surface Software Module- Software Licensing & Security: Metrokey Dongle Protection (ID: 45984, Status: Valid, Local Workstation), Driver Version 7.6.0- Native CAD Data Core Interfaces: STEP, NX, VDA-FS, IGES, EMD (Q-DAS), IMPEX-ELEM, CURVE, SURF, IPH, PRC- Optional Extension Interfaces: CATIA, Pro-E, SolidWorks- Included Calibration Accessories: High-purity Ceramic Reference Calibration Sphere complete with base extension column block

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of slots in tool magazine: 16, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 50 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a maximum X travel of 850 mm and a rapid traverse speed of 45 m/min, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 50 vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 50 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz Gusdpfsy Uvp Rex Akyec • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and a robust turret with 16 tool stations, this machine is designed for medium to large series production. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN vertical turning machine we have for sale. Contact us for further details. • Operation Types: OP 40 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production Gujdpey Uvf Esfx Akysc • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Maximum X Travel: 850 mm • Z Travel: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN vertical turning machine was manufactured in 2005. It features a maximum chuck diameter of 200/250 mm and a swing diameter of 260 mm. With independent X and Z axis drives, it allows for the simultaneous machining of two workpieces. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN machine we have for sale. Contact us for further details. • Operation Type: OP 20 • Machine Type: EMAG VSC 200 TWIN • Production Type: Medium to Large Series Production • Number of Spindles: 2 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Driven Tools: No • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Spindle Flange: DIN 55 026 Size 6 • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power (40% Duty Cycle): 39 kW • Spindle Power (100% Duty Cycle): 28 kW • Torque (40% Duty Cycle): 460 Nm • Torque (100% Duty Cycle): 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm • Turret Type: Disc Turret • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s Gjdpfx Akoy Uuybjysuc • Machine Bed Material: Polymer Concrete MINERALIT® • Automatic Pick-up Loading System: Yes • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Electrical Standard: VDE 0113 • Approximate Machine Weight: 12,000 kg • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Workpiece Handling: Conveyor-Based Pick-up Automation The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools No

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Z-axis: 200 mm, spindle motor power: 39,000 W, spindle speed (max.): 6,000 rpm, workpiece diameter (max.): 200 mm, overall weight: 12,000 kg, number of axes: 4, This 4-axis EMAG VSC 200 TWIN OP 10 was manufactured in 2005. It features simultaneous machining of two workpieces, independent X and Z axis drives, and a maximum chuck diameter of 250 mm. With a rapid traverse of 45 m/min on the X axis and 30 m/min on the Z axis, this vertical turning machine offers efficient performance. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 200 TWIN OP 10 machine we have for sale. Contact us for further details. • Operation Type: OP 10 • Simultaneous Machining of Two Workpieces: Yes • Independent X and Z Axis Drives: Yes • Independent Measuring Systems: Yes • Maximum Chuck Diameter: 200 / 250 mm • Swing Diameter: 260 mm • Maximum Workpiece Diameter: 200 mm • Loading Time: 2–4 s • Front Spindle Bearing Diameter: 100 mm • Maximum Spindle Speed: 6,000 rpm • Main Drive Type: Asynchronous Motor • Spindle Power 40% Duty Cycle: 39 kW • Spindle Power 100% Duty Cycle: 28 kW • Torque 40% Duty Cycle: 460 Nm • Torque 100% Duty Cycle: 340 Nm • Full Power Available From: 800 rpm • Rapid Traverse X Axis: 45 m/min • Rapid Traverse Z Axis: 30 m/min • Feed Force X/Z: 11 kN • Ball Screw Diameter X/Z: 50 / 40 mm Gusdoy Uuxkspfx Akyjc • Tool Stations: 2 × 8 • Tool Holder Standard: DIN 69 880 • Tool Shank Diameter: 40 mm • Turret Index Time: 0.3 s • Machine Bed Material: Polymer Concrete MINERALIT® • Operating Voltage: 400 V • Control Voltage DC: 24 V • Control Voltage AC: 230 V • Frequency: 50 Hz • Connected Load: 66 kW • Fuse Protection: 160 A • Approximate Machine Weight: 12,000 kg • Electrical Standard: VDE 0113 • Available Control Systems: FANUC 31i / 32i, Siemens SINUMERIK 840 D, Bosch Rexroth MTX • Automatic Workpiece Loading and Unloading: Yes • Vertical Workpiece Clamping: Yes The technical specifications may vary slightly, as these are custom-made machines! Technical Specification Driven Tools No

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Godpfjxu Dcvox Akyouc Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: good (used), Internal item no.: 25089 Tool holder Thread whirling holder Index / Traub No.: W7045012B Very well maintained condition! Guodpfx Asxu Uu Ajkyoc The holder was used on a Traub TNL18.