Used Induct Heating for sale (15,510)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Lodpfjk S Dt Tox Akljrn Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area Lrjdjx Ap Itspfx Aklon - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens Lredjtwv S Nopfx Aklen ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Lrsdjy Uuwmjpfx Akljn Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Lodpfsy Uuu Eox Aklorn Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed Lodpfx Aoy Ur Aajkljrn consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace

Condition: used, Professional, automatic sandwich packaging sealer capable of sealing a wide range of film or cardboard lids onto plastic, cardboard, or film containers. Manufacturer: MPE UK Ltd Lrsdpfx Aksx H S T Aolen Model: SL 1200 Output: max. 48 packs/min. Used machine.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm Lsdpfx Aeu U Ey Isklorn - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, functionality: fully functional, machine/vehicle number: 00039D88, For sale is a used heating oil pressure unit, model OEG Gerätebau DE 3200, for the reliable pumping and pressure maintenance of heating oil in heating systems. This pressure unit is suitable for supplying oil-fired systems and ensures a constant fuel supply. Thanks to the integrated pressure accumulator, pressure fluctuations are compensated, and stable system operation is supported. Lodsy U Uc Nopfx Aklsrn Technical data: Manufacturer: OEG Gerätebau Model: DE 3200 Flow rate: 320 l/h Operating voltage: 230 V / 50 Hz Nominal current: 2.0 A Max. operating pressure: 6 bar Pressure connection: IG ¾" Suction connection: IG ¾" Year of manufacture: as per nameplate CE marking present

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 127.4 kW (173.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,565 kg, input voltage: 400 V, total width: 1,200 mm, total length: 4,850 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 145.6 kW (197.96 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE HT 1202 HE S KC 127.4/145.6 KW Cooling capacity: 127.4 kW / 36.2 tons (12/7 — 35°C) Heating capacity: 145.6 kW / 41.4 tons (30/35 — 7°C) Hydraulic module: 1 pcs. water pump (LOWARA CEA370/3/D), expansion vessel, buffer tank Year of manufacture: 2022 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Options: Heat pump, hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 4 pcs. Copeland ZH132K1P-TWD-477 (scroll) Number of fans: 3 psc. Dimensions: 4.85 x 1.2 x 2 m. Weight: 1565 kg. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Lrjdozbh Evepfx Akljn

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 1,300 kW (1,767.51 HP), overall weight: 17,000 kg, temperature: 25 °C, Description A mobile PCM thermal storage unit transports thermal energy (waste heat or process heat) using phase change materials (PCMs). It stores heat through changes in its state of aggregation, achieving 2 to 4 times the capacity of conventional water tanks while maintaining compact dimensions. This system can be transported on a truck using a swap body system. Storage capacity: 1.3 MWh of heat Key operating principles & details The principle (latent heat): Storage media such as paraffins or salt hydrates melt at specific temperatures, absorbing a large amount of heat in the process. When solidifying, this energy is released exactly at that temperature level. Capacity & efficiency: Since the energy (phase change) is stored without a noticeable temperature increase, the tanks have a significantly greater range. A modern mobile PCM storage unit typically holds storage volumes of several megawatt-hours (MWh). Areas of application: Perfect for supplying hospitals, schools, or swimming pools with district heating, or for residential complexes. The container can, for example, be fully charged at a biogas plant with excess heat and then transported to the point of use to release the heat. Ideal for biogas plant operators or wood gas CHP plant operators, industry, etc., where process heat is available free of charge. Technical data Maximum Lredpfx Aksylmbqolen Storage temperature 75°C Thermal storage capacity gross 1300 kWh Charging and discharging capacity max. 800 kW Electronics on the storage unit: Data acquisition, monitoring, and transmission Charging and discharging technology on the storage unit Environmental compatibility: non-toxic, can be disposed of without harmful substances, recyclable Connection: two supply and return lines, DN50, leak-proof, insulated, quick coupling Grid connection: 400 kV Logistics configurations: Standard container chassis, semi-trailer, swap body technology with twist locks, trailer solution, adjustable thermal insulation hood Dimensions: 6 x 2.55 m x 2.58 m (L/W/H) (~20 ft container) Weight: 20 t

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) Lodpfjwd Halex Aklern CE certification 12-month warranty New machine, built in Italy The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: excellent (used), heating capacity: 175 kW heat output released into the air: 140 kW fan capacity: 8900 m3/h fuel: solid fuel of wood origin year of manufacture: 2007 weight: 615 kg power supply: 380 V Lredpfx Akoza Dxcelsn CE marking

Condition: like new (used), functionality: fully functional, Newly arrived! We can offer you this top incubator / heating cabinet type B 5028 of the world brand "Heraeus" from federal stocks. The B 5028 is characterized by its particularly precise temperature control and minimal energy requirements and, due to its almost indestructible quality / design, is virtually indispensable in any laboratory. Thanks to its extremely compact design, it fits ideally as a table-top unit even in the smallest corner and can be connected electrically almost anywhere - power consumption only 180 watts! The minimum temperature deviations comply with DIN 58945 Sheet 1, and the appliance also has a timer, fresh air supply and overload/temperature protection. The appliances offered here are all from stock and have never been used - all components are in mint condition and undamaged - see pictures. The delivery takes place in a special wooden box, including power cable and operating instructions. Technical data: Temperature range 10-70 degrees External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity approx. 28 liters DIN 12880 part 1 and 2 tested Protection class 1 IP 20 Temperature monitor according to DIN 12880 class 3.1 Shelves: 2 Weight: approx. 30 kg Lodpfsqv Avtex Akljrn Shipment will be made within three working days of receipt of payment by a forwarding agent - you can of course also collect the appliance from us during regular opening hours. The total weight of the system including accessories and pallet is approx. 60 kg. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,765 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 2,950 mm, gearing type: converter, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 250 X 75 - 12, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,950 mm, total length: 2,650 mm, total width: 2,700 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C5000ET – 2013 | 9,765 HOURS | ELECTRIC | DUPLEX 4400 mm --- 🚀 Ready to operate from day one – no investment, no risk --- ### ✅ Why choose this forklift? Are you looking for a forklift that won’t disrupt your operations? This COMBILIFT C5000ET is a tested unit after full service – ready to run immediately without hidden costs. ✔ Fully serviced (oils, filters, total inspection of all components) ✔ Technical and visual condition: like new ✔ Only 9,765 operating hours – genuinely low mileage ✔ New tyres – no additional investment needed --- ### ⚙️ Main specifications * Capacity: 5,000 kg * Drive: ELECTRIC ⚡ * Mast: Duplex – 4,400 mm lift height * Fork positioner: 1,150 mm * Forks: 1,200 mm * Cabin: Full cabin with heating and air conditioning --- ### 📋 Full technical specification General info: * Year of manufacture: 2013 * Operating hours: 9,765 MTH * Capacity: 5,000 kg * Load centre: 600 mm * Truck weight: 7,500 kg Mast and lifting system: * Mast type: Duplex * Lifting height: 4,400 mm Forks and attachments: * Fork positioner: 1,150 mm * Fork length: 1,200 mm * Free lift: 2,000 mm Dimensions: * Height: 2,600 mm * Length: 2,650 mm * Width: 2,700 mm * Overall height: 2,950 mm Running gear: * Tyres: Super elastic (100%) – new * Front: 16 x 7 x 10 1/2 * Rear: 250 x 75 - 12 Equipment: * Full cabin * Fork positioner * Heating Condition: * Technical: 5/5 – fully serviced * Aesthetic: Refurbished, like new, no corrosion --- ### 🏭 Perfect for: ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industries ✔ Handling long loads ✔ Indoor and outdoor use --- ### 💡 What you’re buying This is not just a “used forklift.” You’re purchasing a fully prepared, ready-to-work machine: ✔ Every unit is thoroughly tested prior to sale ✔ Ready for immediate implementation ✔ Live online demo possible 🎥 ✔ Delivery direct to your company available 🚛 --- ### 🌍 Delivery and support * Transport across Europe * Complete logistics handling * Leasing / finance support * After-sales service --- ### 🏆 Why FT LOGISTICS? We deliver forklifts that work – not ones that end up in the workshop. ✔ Over 100 machines available ✔ In-house servicing and prep Ledezaw Nnepfx Akljrn ✔ Europe-wide experience ✔ Hundreds of satisfied customers --- ### 📞 Contact us now FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: like new (used), Year of construction: 2016, Solid fuel boiler. Lrjdpfoy S E Nzex Aklon

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Lsdpet Ngfijfx Akljrn

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. In very good condition. Lrodsy Uzhrspfx Akljn

Year of construction: 2007, condition: used, Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C. Additional title: wort cooler Wort cooler capacity approx: 10 hl/h Content water: 4 l Lodpfxow Uczrs Akljrn Content wort: 4 l Max. pressure: 10 bar Weight: 165 kg Material: stainless steel Position: premounted on frame Features: splash guard, plate heat exchanger, aeration via Venturi jet

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Lredpfsvcqtzsx Aklsn Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Lrsdsu T H Rlopfx Aklsn Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: 400V; 5.6A; 1450 RPM

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Lrjdpfx Asyzmagekljn Heat transfer medium: water

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Ljdpfsx Ttu Ijx Akljrn Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Lredpfx Akox Da Dujljn Manufacturer : SPX Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: excellent (used), Year of construction: 2013, Cooling power: 10 kW Heating power: 11 kW Refigerant: R407C Refrigerant diagram, operational limits see at the photos! Ledpfx Aksfx S Dajlern We have15 unit in stock!