Used Induct Heating for sale (15,603)

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 44.9 kW (61.05 HP), type of input current: three-phase, type of cooling: air, overall weight: 610 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,900 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 53.1 kW (72.20 HP), Aircooled chiller/Heat pump Climaveneta NX N G06 LN K 0202P 44.9 kW/53.1 kW Cooling capacity: 44.9 kW / 12.77 tons (12/7 — 35°C) Heating capacity: 53.1 kW / 15.1 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump Refrigerant circuit: 1 pcs. Djdpfsv Tnh Dsx Ai Eowd Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU60120VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 4 pcs. Dimensions: 1.9x1.2x2 m. Weight: 610 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW Dsdpfju Scqbsx Ai Ejwd -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 26.5 kW (36.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 365 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,950 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 31 kW (42.15 HP), Aircooled chiller/Heat pump KAMPMANN WSAN XSi 14.1 26.5 kW/31 kW Cooling capacity: 26.5 kW / 7.53 tons (12/7 — 35°C) Heating capacity: 31 kW / 8.81 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric LNB65FAEMC (rotary, inverter) Type of refrigerant: R410a Number of fans: 1 pcs. ZKSN-750-8-10 Hydraulic module: 1 pcs. water pump WILO BAC40-125-0,75 Dimensions: 1.95x1.15x1.4 m. Dwjdewbdhnopfx Ai Ejd Weight: 365 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 594.2 kW (807.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,005 kg, input voltage: 400 V, total width: 2,250 mm, total length: 7,560 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 675.7 kW (918.70 HP), Aircooled chiller/Heat pump TRANE RTMA170 594.2 kW / 675.7 kW Cooling capacity: 594.2 kW / 168.96 tons (12/7 — 35°C) Heating capacity: 675.7 kW / 192.13 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH51-140-538Y (screw) Type of refrigerant: R134а Number of fans: 12 pcs. (Frequency inverter) Dimensions: 7.56x2.25x2.4 m. Weight: 8005 kg Working hours: 11801/2195 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dwsdsxpvztjpfx Ai Eed Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 368.7 kW (501.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,380 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,430 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 411.8 kW (559.89 HP), Aircooled chiller/Heat pump TRANE RTMA105 368.7 kW / 411.8 kW Cooling capacity: 368.7 kW / 104.84 tons (12/7 — 35°C) Dedpsxp Iz Ejfx Ai Ejwd Heating capacity: 411.8 kW / 117.09 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. 4-pipe system (Hot/chilled simultaneous water production). Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH01-90-340Y (screw) Type of refrigerant: R134а Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.43x2.25x2.4 m. Weight: 6380 kg Working hours: 4138/1893 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2018, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg Dsdpfx Asxl R Rnji Eewd

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Dwjdpfexqfwtox Ai Eed Diameter: 2.80m Length: 17.10m

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Djdpow Dy D Djfx Ai Eewd Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Dodpfx Aijx Ewqds Eewd Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: DN25 Distance from outlet to floor: 365 mm Propeller agitator Empty weight: 184 kg

Condition: new, functionality: fully functional, This is a 4-zone induction cooktop with an under-counter design from the manufacturer RM, model RM-SPI 780 ES, new. This induction cooktop features induction technology and the cooktop surface from the manufacturer Berner, with 5 kW of power per cooking zone. Request a price! You will receive an invoice with VAT shown. Our device service for you: New product, 1 year manufacturer's warranty High-quality brand devices at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 standard Technical data: W x D x H: approx. 860 x 820 x 1080 mm Power connection: V: 400 / kW: 20.0 / Hz: 50-60 Energy consumption of the 4 zones, each 5 kW Cooking zone size: 12-23 cm diameter Weight: approx. 108 kg Serial number: 26060055 Condition: New, fully functional Additional information: Electric device Dsdpezp Hd Eofx Ai Ejwd With open under-counter design, closed on 3 sides Stainless steel Operating indicator Infinitely adjustable Convenient maintenance and cleaning 4 zones Adjustable feet Induction Cross-section of the conductor CU (mm²) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have questions, would you like advice, or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Dwedezp Rmqopfx Ai Eed Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 84.5 kW (114.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,016 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 92 kW (125.09 HP), Aircooled chiller/Heat pump DAIKIN EWYQ085G XR036 84.5 kW / 92 kW Cooling capacity: 84.5 kW / 24.03 tons (12/7 — 35°C) Heating capacity: 92 kW / 26.16 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP235KCE-TWD-522 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs . Hydraulic module: 2 pcs. water pump Lowara CIE370/1V/D. Dimensions: 2.83x1.2x1.8 m Weight: 1016 kg Working hours: 10380/468 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dsdpfx Aijzxdaco Ejwd Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), TETRA PAK SPIRAFLO – Aseptic Multitubular Heat Exchanger Aseptic multitubular heat exchanger TETRA PAK SPIRAFLO, designed for the continuous thermal treatment of liquid and viscous food products in industrial process lines. The Tetra Spiraflo system uses tubular heat exchange technology to perform indirect heating and cooling operations, keeping the product and the heating fluid separate. Its multitubular configuration makes it particularly suitable for pasteurization, UHT treatment, aseptic processing, heating, cooling, and heat recovery processes. MAIN FEATURES -Manufacturer: TETRA PAK -Series: Tetra Spiraflo -Type: Aseptic multitubular heat exchanger Dsdpfx Aijzm U Nqe Eewd -Technology: tubular/multitubular heat exchange -Hygienic construction in stainless steel -Continuous thermal treatment -Indirect heating and cooling of the product -Multiple heat exchange sections -Sanitary connections -Suitable for pasteurization and UHT processes -Integrable into aseptic processing lines -Designed for continuous industrial use APPLICATIONS Depending on the configuration of the installation, the Tetra Pak Spiraflo can be used for: Preheating and heating Pasteurization UHT treatment Aseptic processing Cooling Heat recovery Thermal conditioning prior to filling It can be integrated with process tanks, pumps, homogenizers, deaerators, holding tubes, aseptic tanks, and filling systems. Particularly suitable for the dairy, beverage, juice, processed fruit, sauce, and liquid food industries, and depending on its configuration, can be used with milk, juices, beverages, purees, concentrates, sauces, and other products that require controlled thermal treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Dodpfx Aoznca Hji Eswd Year of manufacture 2010 with feed with ash discharge with control

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK ALTO NEPTUNE 4-50 FA HOT WATER PRESSURE WASHER NEW HEATING COIL The unit comes with new accessories, including an R+M (German brand) spray gun, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 150 bar and a flow rate of up to 900 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 150 Max. Heating temperature [°C]: 80–150 Connected load [kW]: 6 Detergent tank [l]: 10 Dwsdpfx Aez Ayd Ssi Eod Hose length [m]: 10 Weight [kg]: 136 EQUIPMENT: NEW heating coil NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dispensing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. Dsdezxqd Ispfx Ai Eowd The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Max. pressure: 16 bar You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Dwodpfx Ajzzllxji Ejd Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos Djded Skkyopfx Ai Eswd -Performance levels: 5 -Price: per piece -Number: 2 pieces -Dimensions: 595/380/H660 mm -Weight: 38 kg

Condition: excellent (used), Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: Schmersal, Inductive sensor proximity switch, 2 pieces, unused, original packaging Dsdpfem Ui H Dsx Ai Eowd -Product Type: IFL 15-333-11yPG -Quantity: 2 sets available -Price: per set -Cardboard dimensions: 125/85/H40 mm -Weight: 0.3 kg/carton

Condition: good (used), Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat Djdpfx Aionch H Ts Ejwd -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger Dodou Tlhvopfx Ai Eowd -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece Dwjdpfju Tytaex Ai Eed

Condition: used, Year of construction: 2006, operating hours: 71,000 h, functionality: fully functional, MTU 16V 4000 GS L61 gas generator. Year of manufacture: 2006. Operating hours: 71,000. Voltage: 10,000 V. Delivery includes: * genset on skid * gas train control panel * pump unit * documentation and logbook. In fully operational condition. Dwodoy At Awjpfx Ai Eod

Condition: like new (used), functionality: fully functional, type of input current: DC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Industrial Gas Infrared Heaters Lersen COMPACT TOP COUT08 – 2 Units For sale: 2 industrial gas-fired infrared radiant heaters, Lersen CZ COMPACT TOP, model COUT08. Suitable for heating production halls, warehouses, workshops, and other large industrial spaces. Technical specifications: Manufacturer: Lersen CZ s.r.o. Type: COMPACT TOP Model: COUT08 Quantity: 2 units Fuel: G20 natural gas Rated input: 37–48 kW Rated heating output: 33–43 kW Gas consumption: 3.5–4.6 m³/h Electrical connection: 230 V / 50 Hz Electrical consumption: 70 W CE marked Made in the Czech Republic Dedpfozvainox Ai Eowd Both units are being sold together. The condition can be seen in the photos. Price for both units: €1,250 Location: Ivanka pri Nitre, Slovakia For further information or additional photos, please contact me via message.

Condition: like new (used), Year of construction: 2024, operating hours: 60 h, functionality: fully functional, cooling capacity: 497 kW (675.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,364 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, total width: 2,200 mm, total length: 5,645 mm, total height: 2,530 mm, warranty duration: 6 months, power: 244 kW (331.75 HP), input current: 392 A, heating capacity: 492 kW (668.93 HP), input frequency: 50 Hz, Equipment: compressor, cooling unit, type plate available, Chiller / Heat Pump Trane Type: CXAF150 SE XLN Year of manufacture: 2024 Operating hours: approx. 60h R454B Cooling capacity: 497 kW - 7/12°C - 35°C Heating capacity: 492 kW - 50/55°C - 7°C COP cooling: 3.05 COP heating: 2.62 Scroll compressors 3/3 2 circuits EC fans – Extra low noise Dwodpow Idkuefx Ai Esd Available Trane warranty: until 22/05/2026