Used Induct Heating for sale (15,977)

Condition: new, - Dimensions: 700x750x750/1050 mm - 1 heating zone - Cooking plate diameter: Ø 300 mm - Electric power: 5 kW - Voltage: 400 V - Frequency: 50/60 Hz Ledpfx Ajw Em A Nonyeac - Net weight: 62 kg

Year of construction: 2007, condition: used, Circulation pump: Manufacturer Flaco Geräte GmbH, DE-33334 Gütersloh FZPII/D, Art. No. 4020 5780, Mfg. No. 01056 Performance: Pressure: 9.0 bar, Flow rate: 10 l/min Laodpfxshq Rice Anysc 1-phase, 0.55 kW, 230 V/50 Hz 3.50 A, 1320 rpm, IP 55 Expansion tank: Manufacturer Reflex Winkelmann GmbH & Co. KG, DE-59227 Ahlen Reflex No. / Mfg./Serial No.: 06G05194002, prEN 13831 2000 Permissible operating temperature: -10/120°C, Max. continuous operating temperature of the diaphragm: -10/70°C, 1.5 bar initial pressure (factory setting/site setting), 3.0 bar permissible Operating overpressure, 18 liters nominal volume.

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Lodpouhmacsfx Anyeac Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Lsdpfxoyfnuls Anyoac Medium: Water / Glycol

Condition: new, Year of construction: 2023, functionality: fully functional, power: 1.6 kW (2.18 HP), overall weight: 57 kg, total width: 620 mm, total length: 420 mm, total height: 1,010 mm, type of input current: AC, input voltage: 230 V, cooling capacity: 3.8 kW (5.17 HP), Equipment: documentation/manual, The Airrex HSC-1370 spot cooler is the perfect solution for targeted cooling in industrial settings, workshops, and commercial spaces. With its high cooling capacity and flexible mobility, it provides cooling precisely where it is needed – efficiently, reliably, and with optimized energy consumption. Key features: • Powerful cooling: 13,000 BTU/h (~3.8 kW) for rooms up to approximately 200 m³ • High airflow: 8 m³/min provides rapid and direct cooling • Energy-efficient: Power consumption approximately 1.6 kW at 230 V, 50 Hz • Mobile & flexible: Wheels for easy positioning directly at the workstation • Environmentally friendly refrigerant: R-410A, efficient and sustainable • Targeted cooling: Adjustable air outlet for precise temperature control • Condensate management: Integrated collection tank for condensate water • Easy to maintain: Removable, washable air filter Advantages: • Targeted room cooling: No energy waste by cooling unused areas • Ergonomic mobility: Easy to move to different workstations • Suitable for industrial and commercial use: Robust for workshops, production halls, server rooms or events • Quick installation: Plug-and-play – no complicated assembly required • Efficient heat reduction: Reduces the ambient temperature locally by up to 10 °C Ljdpfx Anszc D Uceysac Technical data Cooling capacity 13,000 BTU/h (~3.8 kW) Airflow 8 m³/min Power consumption approx. 1.6 kW Refrigerant R-410A Dimensions (W x D x H) 42x62x101 cm Weight 57 kg Operating area approx. 200 m³ Operating temperature 25–45 °C The air conditioner is new and unused, but it was on display in our showroom. There may be some storage marks. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is of course also possible. The item will be shipped by freight carrier - shipping costs within Germany are €99. If you have any questions, please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 0.51 kW (0.69 HP), overall weight: 45 kg, total width: 740 mm, total length: 500 mm, total height: 1,300 mm, type of input current: AC, input voltage: 230 V, volume flow: 14,000 m³/h, Rex Nordic Air Cooler REX 14000 REX14000 is our most compact, cost-effective, and energy-efficient air cooler. The cooler generates 14,000 m³/h of cooled and purified air to improve comfort for people, livestock, or premises in general. This means it cools an area of approximately 175 m². The REX14000 features an effective, integrated UVC light that kills potential germs and viruses. It has low power consumption (510W), filters and refreshes the air, and has louvers for effective distribution of the airflow, making it perfect for cooling large indoor spaces. This means powerful and environmentally friendly cooling for less than €2 per day. Easy to set up, operate, and maintain. Simply add water and enjoy cooling. The advantage of the cooler is that power is only consumed by the fan and a water pump. The actual cooling is achieved through natural evaporation. Technical specifications: Area coverage ≤ 120 m² Airflow 14,000 m³/h Water tank 60 l Speed (max.) 1,380 rpm (Variable) Voltage 230 V, 50 Hz Power consumption (max.) 510 W Weight 45 kg Dimensions (W x D x H) 74 × 50 × 130 cm The air cooler is a demonstration unit with minor signs of use. You will receive an invoice with VAT shown. Lodpfjzc D Hxjx Anyoac Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. The item will be shipped by freight carrier - shipping costs within Germany are €99. If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed Lajdpfxsuq Iy Ro Anyjc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. It is possible to heat flat bars, round rods, or square rods. Lajdpfxow Hqlde Anysc

Condition: good (used), functionality: fully functional, input voltage: 220 V, total width: 379 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 03/2027, Heating cabinet Temperature adjustable up to 90°C Stainless steel design Simple technology Dimensions: 379 x 450 x 850 mm (W x D x H) Connection: 220V Used equipment Lsdpfevdktqjx Anyoac Delivery service available Many other bakery machines in stock!

Condition: like new (used), functionality: fully functional, 1. Like-new tubular heat exchanger (HT) for steam against water or water against water, liquid medium against steam or water. Material: Stainless steel – all parts in contact with the medium. Head plates of the baffle chambers made of P265GH; inside surface platinum-plated with stainless steel. Support consoles made of P265GH. Suitable for recovering cooling water or flash steam; Sustainable energy utilization. Heat exchange surface area: 905 m². Heat output – depending on the medium, well over 1,000 kW. Water flow rate up to 700 m³ / hour. Tube-side pressure: 4.0 bar gauge; test pressure: 9 bar gauge. Shell-side pressure: 9.0 bar – test pressure: 16 bar gauge. Laodjzc R Tfepfx Anyec Maximum temperature: 140 °C. For heat recycling or cooling, heating, heat exchange. Total weight: 12.0 tons. Dimensions: Length 6,500 mm; outer diameter 1,500 mm. Volume: 11,500 liters. The HT has been approved by Bureau Veritas as a pressure vessel – all documents are available.

Condition: used, Year of construction: 2016, Electrostatic filter / fine dust filter for a power output of 700 kW, year of manufacture 2016, including dust removal system, control system, and electrical wiring diagrams, fully functional. Laodpfxsvyrwpj Anyec Raw gas dust content: 150 mg/Nm³ Clean gas dust content: 20 mg/Nm³

Condition: used, Year of construction: 2010, Wood chip processing system Herz firematic 150 BioControl, year of manufacture 2010, output 150 kW, only 4700 operating hours. Includes bunker discharge system with spring-loaded blade, 3.0 m diameter, includes silo distribution screw, includes return flow lift (boiler pump with mixing valve), includes control system. The system is fully functional. The system must be dismantled by the buyer. A wall opening will be created in the boiler room, allowing everything to be removed via the bunker. Lodpfxjvgf Ibs Anyjac

Condition: good (used), Year of construction: 2013, Grote 16L Heated butter pump 2013, stainless, 16L heated butter pump, agitated hopper, discharge screw, mobile, 3Ph Laodey R El Hjpfx Anyec

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE Ljdpfsw Ug Atsx Anysac 114 kg per 24 hours - 5 l/h

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip heating plant with 50 kW heating output, already dismantled. Complete with boiler and chip storage unit, but without chip discharge system. Lsdpfxsv Ngq Ae Anyoac

Year of construction: 2003, condition: used, Technical details: operating pressure: 10 bar voltage: 400/50 V/Hz control voltage: 24 V total power requirement: 0,76 kw weight of the machine approx.: 160 kg dimensions L x W x H: 0,58x0,68x1,35 m Lsdju N Afgspfx Anyoac heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides 2 Pieces available *

Condition: excellent (used), Year of construction: 2003, Equipment: type plate available, Buderus SB735 low temperature boiler Output: 790kw Year: 2003 Burner: If desired oil or gas burner Weishaupt Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Lsdpfxstuvl Eo Anyoac Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2007, Viessmann Vitoplex 200 boiler Version: SX2 Output: 150Kw Burner: Several oil and gas burners available Viewing by telephone only! Preferential sale to dealers, tradesmen or export. Laodpsmnqb Njfx Anyec All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2008, Boiler Buderus GE315 Output:170kw Burner: oil or gas Weishaupt burner available on request Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Laodomnqcmspfx Anyoc

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Ledpfxomnqc Ho Anyeac Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: excellent (used), Year of construction: 2002, Fröling boiler Output: 1250Kw Lajdpemnqhrofx Anysc Year: 2002 Burner: Gas or oil burner available on request

Condition: excellent (used), Viessmann Vitoplex boiler Output:460kw Burner: If desired oil or gas burner Weishaupt Viewing by telephone only! Lodpfemnqi Tsx Anyoac Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2009, Boiler Astebo 5500kw,10Bar,120°,year 2009,capacity 5250l Lodpfx Aovu I Dnenyoac

Condition: excellent (used), Novumax H2R 625 / 600 kW heating boiler Buderus/Viessmann Laedpsywzx Ajfx Anyjc

Condition: excellent (used), Year of construction: 2011, Buderus GB312 gas condensing boiler Output: 160Kw Ljdemnqb Espfx Anyjac Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible