Used Injecter Nosel Machine for sale (65,499)

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Hfodpfx Afoyw Svfo Aek

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Hfedpfsilhfcox Af Ask

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Hfedpfxoxyk Snj Af Aek

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Hsdpfoyab Nfsx Af Aofk

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Hfjdpfxezd Ehxo Af Ask

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Hedpfoyddzljx Af Aofk

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Hjdpfjyddzfox Af Aefk

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Hsdpfx Aezub Hrjf Ajfk Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate Hsdpfx Afjgrzh Eo Ajfk immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2006, machine/vehicle number: 61008535, This KraussMaffei KM950-6100 MX large injection molding machine will be auctioned off online as part of our industrial auction / machinery auction – Wirthwein Friedberg GmbH – machines, packaging, and other materials. Hedpfszqymijx Af Ajfk You can find this and many other items on our platform.

Condition: used, Year of construction: 2005, machine/vehicle number: 423086, This Ferromatik Milacron Elektra 110 evolution injection molding machine will be auctioned off in our industrial auction / machinery auction (follow-up auction of Wirthwein Friedberg GmbH – machinery, packaging, and other materials) online. Hedpfx Afezqyllo Asfk You can find this and many other items on our platform.

Condition: used, This Ferromatik Milacron K-TEC 60 injection molding machine will be auctioned off online as part of our industrial auction / machine auction post-auction for Wirthwein Friedberg GmbH - machines, packaging, and other materials. Hedjzqyk Iepfx Af Asfk You can find this and many other items on our platform.

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Hfsdpfx Aep S Srhef Ajk

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hfedpfx Afoh Nypfs Ask

Year of construction: 1986, condition: ready for operation (used), Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed. Hodjpvkzyepfx Af Asfk

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05.2020 Hedpfx Afjzhar Hj Aofk Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connection: 53.5 kW Operating Hours Pump: 8555 40 mm plasticizing cylinder assembly (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Price: €48,000.00 Available from September 2026. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, 1 hydraulic injection molding machine, ARBURG ALLROUNDER SELECTA 270S Self-dismantling capability Color: as shown in the pictures, matching the images and inspection Hodpfx Aszqcl Isf Asfk Year of manufacture: 2005 Machine number: 198190 Dimensions L/W/H: 350x110x200cm Condition: used

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Hfjdpfx Afszt Slpj Aok

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Hfedpfjzp R I Iex Af Aek terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Hfjdpfx Aozp R Izof Ask delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Hfsdpfx Ajztzqzef Ask

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Hsdpfx Aoxl Hi Tof Ajfk

Condition: used, Year of construction: 1996, functionality: unexamined, ARBURG 221 M 250-55 injection molding machine. Clamping force: 250 kN. Year of manufacture: 1996. Complete with its two control cabinets (without display screen). It is sold in its current condition and is available for immediate removal, unless it is sold in the meantime. You are welcome to visit and inspect the machine at our warehouse. We are open from 9:00 AM to 4:30 PM every day from Monday to Friday. Address: 11/14 Avenue Marcelin Berthelot, 92390 Villeneuve-la-Garenne, France. Price: €1000, loaded onto your truck. Please feel free to call if you require further information. Hfodpfx Afsztgpcs Ask

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, Fully electric injection molding machine with Multilift, conveyor belt, and protective fence from current production. New price: €168,000 Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Year of manufacture: 2022 Machine No.: 259303 Operating hours: 12,182 h Injection unit Injection unit/screw 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating capacity: 9.7 kW Heating zones: 5 Nozzle stroke: 300 mm 50 kN Injection pressure: 2000 bar Clamping unit Clear column spacing: 520 x 520 mm Platen size: 695 x 695 Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum mold installation height: 250-550 mm Ejector stroke: 175 mm / Ejector force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Highly wear-resistant cylinder liner • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Nozzle travel movement, servo-controlled • Electrical connection for needle-gate nozzle • Tool monitoring for ejector plate locking • Protective device open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls 60 l/min • 2 x core pull control • 2 x blow-out • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits, programmable • Conveyor belt electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended travel movements: • Increase in the number of travel stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles. Optimization/operator assistance: for adapting the machine to individual operational requirements • Quality assurance: • Expands the standard quality monitoring and documentation: • Possibilities for process analysis • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - free melting Hsdpfxszn Av Ij Af Aofk • Freely configurable page for start parameters (set cycles with other parameters instead of production parameters) • Socket combination 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating circuits each with 2 kW (230V) • Increased power for heating circuits 1-6 to 3.5 kW each / 230V • Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance) • Robot interface Euromap 67 • Coloring interface • Multilift Select / Transversal design, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment and C-axis (tilting axis), pneumatically operated X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic tilting axis 0-90° 13 Nm / weight 1.2 kg with special equipment 4 x vacuum circuits X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis with end position monitoring Overhead height increased by 200 mm • Conveyor belt • Protective fence • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in top condition and can be inspected while powered on. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Year of construction: 1991, condition: ready for operation (used), A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible. Hfodpfx Afjztra Hs Ask