Used Injector for sale (135)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Gedegwbbqepfx Amysbl Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Gsdpfxodg Itnj Amyebl Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. Godpfx Amjd Nviqoyjbl VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles Gsdpjw Ug A Hofx Amyebl - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT Gjdpfx Aovnq Txomyebl - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: used, This listing is for a Varian 3900 GC With FID and 1041 Packed Injector The Varian 3900 gas chromatograph (GC) is designed to meet the demands of the analytical laboratory with its compact design—GC occupies less than half the workspace of the average gas chromatograph unit. Models 39001-00 and -05 feature an icon-based keypad which simplifies training and increases daily productivity. Select one of six pre-programmed languages for further ease-of-use. Password protection locks keypad from unauthorized access. Each Varian 3900 GC unit features a front access column compact oven with Precise Temperture Control which uses standard 7" (17.5 cm) diameter capillary columns. Maximum operating temperature is 450°C—accommodates any application. Plus, the oven cools down from 450°C to 50°C in only 5.2 minutes! Dimensions and Weight Size: 21.8 in./55 cm (h) x12.5 in./32 cm (w) x 22 in./56 cm (d) Weight: 59 lbs/26.8 kg Equipment can be serviced/renovated/refurbished on request at extra cost. Was previously used with a Perkin Elmer HS40XL Gsdpfjxzh A Hjx Amysbl

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: Gbjdpfxeyap Icj Amyjl - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: excellent (used), functionality: fully functional, mileage: 778,200 km, first registration: 01/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always exclusively serviced at official VOLVO workshops with invoices and complete certified documentation. Equipment: High GT cab, parking air conditioning, VEB+, alloy wheels, automatic transmission, dual fuel tanks, 100-liter AdBlue tank. Note: At 650,000 km, the following parts were replaced: new clutch, water pump, injectors, and catalytic converter. SERVICING CARRIED OUT REGULARLY – MILEAGE CERTIFIED AND GUARANTEED. Leasing and/or financing available for up to 60 installments with the best interest rates on the market. 12-month warranty option available. Note: At 650,000 km, clutch, water pump, injectors, and catalytic converter all replaced. Description may unintentionally contain features that differ from reality, which must be checked on site. This listing does not constitute a contractual commitment. Gbodpfx Asyi U U Hsmyjl For more information and clarification, please call the indicated numbers (also available via WhatsApp direct). Mr. Paolo Antonio Gorgoni The photo book is taken on site at our locations, so the photos are genuine and reflect the current condition of the vehicle. Please note: the system inserts standard features and options automatically, so discrepancies may sometimes be present.

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. Gjdpsxzb Iisfx Amysbl ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: reconditioned (used), Year of construction: 1997, machine/vehicle number: 06143797, Schröder 61 Needle injector Year of construction 1997 Suitable for meat with bone and fresh meat Gjdpfx Amorw Araeysbl 60 cycles per minute with 40mm advance per stroke Hourly capacity 3000 KG

Year of construction: 2020, condition: like new (used), Sympatec laser diffraction system. Gedpjh Nyfcefx Amyobl HELOS/BR multi range, laser diffraction sensor for particle analysis with automatic set-up of selectable measuring range of up to 5 range modules between 0.1 micron – 875 micron. RODOS, dry dispersing system, injector diameter 4 mm, bulk hardened steel; with funnel adapter, including flow – optimized extraction, recommended particle size range: product dependent up to 1500 micron. VIBRI, intelligent vibratory feeder, for the RODOS or GRADIS system family, complete, comprising chute, input funnel 150 cm3 and connecting cable for RS485. SUBMICRON module, R2, for HELOS/R multi range series, measuring range: 0.25/0.45 – 87.5 micron. TOPMICRON module, R4, For HELOS/BR multi range series, measuring range: 0.50/1.8 – 350 micron. Nilfisk ATTIX 33-2H PC, 230V AC, dust class H Computer system Fujitsu ESPRIMO E957 E90+, i7-7700 3,60GHz, SSD. Fujitsu TFT display 27” PAQXOS software, for the operation of all Sympatec instruments with TCP/IP communication, for computers with Windows 7 or 10, on data storage media, including documentation and software protection key.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Offered is a brine injector Günther PI-17 needle, year of manufacture 2000. In good condition, 380V, 16A. Further details on request. Gbsdpsw R Tv Sofx Amysl Cash payment or advance payment. Sale to commercial customers only. No warranty, no liability.

Condition: good (used), functionality: fully functional, Offered is a Günther PI-17 needle pickling injector. The impeller is new, as is the pressure gauge. 380V, 16A. Further details upon request. Cash payment or advance payment. Sale to businesses only. No guarantee or warranty. Gbjdpfxsv Saflo Amyel

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system - Negotiable !!! - Electrical data 100-240V 50-60Hz - Powder absorption up to 200g / min - Air consumption up to 250L / min at 6 bar - Air quality / vapor less than 1.3 g / nm3 - Air quality / oil less than 0.1 mg / nm3 Powder coating gun data - Output voltage 100 kV - max. output current 100 µA - Length of hose 6 m - antistatic hose - Polarization Negative - Conformity ATEX 2mJ Description of hose - Applicator for quick color changes directly from the box - Intuitive 7" touch display - Automatic cleaning function - gun rinsing - Up to 20 user-defined programs - 3 automatic programs - Remote control of the paint quantity and program change from the handpiece -- Equipment - Controller of the PSS series Gbjdpfjg U I Ugox Amysl - ProfiJector RI-1 blunt powder injector - ProfiGun powder gun with quick coupling and remote control - One set of hoses - Stand with vibrator and suction unit with fluidization PSS driver - 7-inch touch panel that can be operated with a glove - 3 automatic programs (overpainting, hard-to-reach surfaces, flat surfaces) - Graduation in 0.1kV and 0.1uA steps - Advanced pneumatic valves for air dose control (romer - patent pending) - The actual air flow measurement reacts to errors such as pressure loss or blockage of the system - Advanced diagnostic tools - Ability to name programs - Ability to control external master controllers with ModBus protocol (A-Series) ProfiGun PM-1 gun - A lightweight ergonomic gun, perfectly balanced with a contoured handle - The ceramic cascade with a voltage of up to 100,000V efficiently loads all types of powders - The new generation of nozzles ensures perfect powder penetration into complex shapes - The profiled nut provides a good grip - The conductive handle with high carbon content provides excellent grounding for the painter - The spray gun is made of special materials with increased impact resistance - Fully demountable design with replaceable powder path tube - The spray gun is patented in the USA and the EU - Cascade polarity - negative ProfiJector powder coating pump Description of the pump - Design of a new efficient injector - The most effective feed angle proven by research - Saves paint and air compared to right angle injectors - It is characterized by relatively low operating costs compared to other pumps - The injector is covered by a European patent

Condition: new, AutoClean Ultrasonic Celaning System Gjdpfxjd Hdvds Amysbl AutoClean ultrasonic cleaning systems, specifically designed for the high and precision cleaning demands of transportation industries such as the aviation, naval, railway and even the engine remanufacturing and repair industries. The AutoClean range has been designed with engine components in mind, cleaning all types of parts from cylinder heads, injectors, engine blocks, brake discs, gearboxes and radiators could all benefit. The AutoClean’s cleaning ability is 16 times more effective than conventional hand washing and with the use of ultrasonic cleaning power this enables you to reach the smallest holes and compartments effectively, meaning cleaning those hard to reach places has never been easier. Tank capacities between 200 to 9,000 litres. 28kHz standard ultrasonic frequency. 40kHz with sweep generator option available. - Constructed entirely of stainless steel (AISI 304). - Tank construction available in AISI 316L or AISI 316Ti. - Automatic shut of heaters at low water level. - Available with vacuum drying option. - Adjustment of the cleaning time & water temperature. - Tailor made design with a large range of optional extras.

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ Gbedoyfim Aspfx Amyjl New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ Godeyfik Iepfx Amysbl One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Gbodpfxeyfgwls Amyol

Condition: used, Year of construction: 2008, power: 226 kW (307.27 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, mileage: 133,000 km, driver cabin: other, emission class: euro4, Vehicle location: Bovenden, environmental badge green approx. 133,000 km run, Torque Reduction: TR40, Prop. Version: 21042761, Max. Torque: 1.530 Nm, Rated Power: 226 KW, Rated Power Speed: 1.900 rpm, Displace Ment. 9,4 liter, Lowible 590-710 rpm, Injector Type: E3-1, Exhaust Brake. VEB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gbodpfxsvhhnas Amysl - .

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. Gbedpfx Aeupzmujmyel The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Gsdpfx Asflpi Nsmyobl Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: excellent (used), Year of construction: 2013, CNC in-line machine composed of: - Upper gluing unit equipped with no. 8 injectors for the automatic application of glue. - Shelf support inserting unit equipped with no. 8 vertical gravity-fed magazines for the automatic feeding of shelf supports. The machine is completed with: - Infeed roller conveyor for loading the workpieces - Outfeed roller conveyor for unloading the processed pieces Gbedekzlkyspfx Amyel

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. Gbsdpfx Amstw S Awoysl The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h Gjdpfofz U Nujx Amysbl • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes Gbsdsfz U Rcepfx Amyol • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean