Used Pickle Injectors for sale (173)

Condition: good (used), Year of construction: 2007, Inject Star BI-124-C-P Pickle Injector Consistency. Ease of Operation. Reliability. Solid Quality Construction. This is what you will discover when utilizing our Inject Star automatic pickle injectors designed to inject your bone-in or boneless meat, poultry, or seafood product Features High speed & low pressure injecting. Suitable for bone and bone less product. Rodpfx Aevzq T Ejgzjck All needles are individually sprung. Injection percentage rate approximately from 0% upwards. High Output. Stage brine filtering system to ensure the best results on recycling. Adjustable speed. Individual needle and belt speed control. Health & Safety Guards Suitable for all types of meat and fish product Main Information: 31 sprung needle tools optional with ISC-B20 touch screen computer working width 400mm clearance: 220mm injection amount up to 55% capacity up to 5.500kg/h variable number of strokes (20-50 strokes) speed of walking beam: 40-60 mm/stroke 1 suction filter, 1 pressure filter, 3 return flow filters Needle tools ,New Twist System Easy clean system. Snap on needles. Suitable combition from 1 to 4 needles for injection and also for tenderising and injecting with knives fitted to a maximum of four or a combination of needles and knives to a maximum of four in tota to enable injecting and tenderising all at the same time. optimal treatment for every product singular up to quadruple tools, bore from 2 mm up to 5,5 m Manufacturer: Inject Star Model: BI-124-C-P Year: 2007 Beltwidth: 400 mm Adjustable needle stroke: 20-50 strokes/min. Max. Product Height: 220 mm Capacity: 5.500 kg/hour Number of needles: 62 (max. 124) Power: 5,4kW / 50Hz / 400V Machine Dimensions LxWxH: 1.800x750x2.200 mm Machine Weight: 450 kg.

Condition: reconditioned (used), We have a large stock of electronic cards for injection molding machines. All our spare parts are tested in our facilities. Rodpfjfwcu Ujx Agzjck

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Redpfox A Tc Uex Agzjck Max. panel length: 2100 mm No of injectors: 4 Lateral horizontal groups: yes

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm Redpfx Aeffphbegzeck -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: used, Year of construction: 2007, operating hours: 3,608 h, Drive: Track Serial number: XN7DC1xxxx Rcsdpfxovgzqrs Agzsk Please contact ATS Norway for more information Please provide reference number upon request: 18436 Specifications: - 2007 model - 3608 hours - 17042 Kg - 116 kW - Width of Doser 301 cm - Width of doses with shear approx. 380 cm - Belt width: 86 cm - Tilt cylinders - 6 Way Function on grader blade - Good undercarriage (see pictures) - New undercarriage (g tt approx. 300 hours) - Lever steering - Service history - Ready for delivery Description: New Holland Doser with new undercarriage and 6-way function. The undercarriage has run about 300 hours since it was replaced. 2 injectors have been changed. It comes with spare parts when sold. Some repair cost to be expected Ready for delivery Hours: 3608 Own weight: 17042 Total Weight: 17042 Kw: 116 Model: 2007 New Holland D150B Doser m/ nytt understell og 6 veis funksjon på skjær

Condition: used, mileage: 397,326 km, power: 88 kW (119.65 HP), first registration: 09/2010, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 03/2026, color: white, gearing type: mechanical, emission class: euro4, Year of construction: 2010, Equipment: ABS, central locking, * Interior conversion by Winter Refrigerated Vehicles * Refrigeration unit: Delphi Diavia Frigo 3000/06 * Cooling down to 0°C * 4 new injectors with invoice * TÜV valid until 03/2026 Redpfxjx N U Nxo Agzeck * Trailer coupling Special equipment: Cargo compartment partition wall, seats in cab: front passenger double seat Additional features: Storage: luggage net on rear doors, driver-side airbag, traction control (ASR), brake assist, rear wing doors without windows, body/superstructure: standard box van, adjustable steering column (steering wheel), engine 2.3 L - 88 kW JTD CAT, non-smoker package, wheelbase 3,450 mm, sliding door loading/passenger compartment right, seat upholstery: fabric, seats in cab: adjustable passenger seat with armrest and lumbar support, seats in cab: height-adjustable driver's seat, seats in cab: driver's seat with armrest and lumbar support

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 Redpjpz H D Ijfx Agzjck the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Rjdpfxsd Nvi Ds Agzsck Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Rsdst Hmt Iopfx Agzjck Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm Rsdjffphcepfx Agzock -Weight: 13 kg

Condition: used, machine/vehicle number: YK2HEDD104K05xxxx, mileage: 697,000 km, Year of construction: 2004, Please contact ATS Norway for more information Rcodpfewvy T Nex Agzsk Please provide reference number upon request: 20749 Specifications: - 2004 model - Km: approx. 697,000 - EU-approved until 21.02.2026 - 1987 EKA body - 6x4 - Engine brake - Suspension: steel - 631 hp - Wheelbase: 465/137 cm - Largest winch: 30 tons - Smallest winch: 10-15 tons - Tool cabinet included - New injectors and wiring - Compressor replaced - Rear support legs - Tires (see pictures) - Extra lights - Rotor beam - Chains - Remote control - Manual - AC/climate - Bed - Ready for delivery Description: 2004 Sisu E18M 6x4 heavy excavator with EKA body and chains. The car has just been inspected by the EU and the owner spent 300,000 kroner on this inspection. The wiring harness, compressor and injectors are some of the things that were replaced and the engine was cleaned. The blue tool cabinet is mainly what comes with it, as well as chains so that the car is approved. Everything else in the cabinets is negotiable on price. The largest winch is 30 tons and the smallest is between 10-15 tons, the owner doesn't remember exactly. You can't use both winches at the same time. Watch the video. Ready for delivery. Km: 697000 HK: 630 Technical approved: Yes EU-approved until: 21.02.2026 Own weight: 19030 Total Weight: 34200 Payload: 15095 Width: 255 Length: 955 Euro: 3 Model: E18M 6x4 tungberger m/ EKA påbygg og kjettinger. SE VIDEO

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Rcedpfx Aegwbbqegzsk Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: good (used), Nozzles, injectors, diesel engine nozzles -Type: 214 5079 Quantity: 10 pieces available Price: per piece -Weight: 0.4 kg Rcodob A Hx Depfx Agzsk

Condition: used, machine/vehicle number: WF0RXXWPGRER8xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21817 Specifications: Not EU-approved Km: approx. 220,000 (may increase) Tow hitch Tires (see photos) Euro 5, 95 hp 4x2 3 seats Radio/CD Climate control / AC Ready for delivery Notes: Leak in the injectors Redexw Nhpjpfx Agzock HK: 95 Technical approved: no EU-approved until: 30.06.2025 Own weight: 1431 Total Weight: 2030 Payload: 524 Width: 183,5 Length: 441,8 Euro: 5 Model: CONNECT Number of seats: 3

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 Rodpodg Itnjfx Agzjck WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: good (used), Nozzles, injectors, diesel engine nozzles Redpsb A N R Hsfx Agzjck -Type: Quantity: 10 pieces available Price: per piece -Weight: 0.4 kg

Condition: used, Year of construction: 2007, operating hours: 11,800 h, Serial number: L70FV2xxxx Rjdpfxjx Hdldo Agzock Please contact ATS Norway for more information Please provide reference number upon request: 22029 Specifications: 2007 model Hours: approximately 11,800 125 kW Weight: 15,000 Tires (see pictures) Summer tires Volvo grader bucket Rotor lamp Dashboard replaced Turn signal lever has been replaced Emergency stop switch is new Injectors changed two years ago (not much has happened since then) One owner AC/climate Radio Ready for delivery   Description: 2007 Volvo L70F wheel loader w/ winter and summer tires and grading bucket. The machine has only had one owner throughout. The instrument panel on the machine has been replaced. The owner says an error code is coming up, but he says this is wrong since everything needs to be replaced. Watch video. Ready for delivery. Hours: 11800 Own weight: 15000 Kw: 125 Model: L70F hjullaster m/ vinter- og sommerdekk og planeringskuffe. En eier! Se video

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Rcodsdi R R Repfx Agzjk Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: good (used), Nozzles, injectors, diesel engine nozzles Rcedsb A Sgiopfx Agzsk -Type: Quantity: 12 pieces available Price: per piece -Weight: 0.3 kg

Condition: used, machine/vehicle number: YV2AP90D4DA74xxxx, mileage: 520,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21915 Specifications: EU approved until 16.05.2026 Model year 2013 Mileage: approx. 520,000 km I-Shift Tires (see photos) Retarder Box included Fifth wheel Injectors replaced AdBlue removed Euro 5 Length: 754 cm Width: 255 cm Wheelbase: 340/137 cm Curb weight: 14,340 kg 700 hp Reverse camera Tow hitch Extra lights Light bar Bed Radio/CD Climate control / AC Description:Volvo FH16 700 combination truck from 2013.The truck is EU approved until 05/2026 and is ready for operation.Box included.Can be delivered on short notice. Km: 520000 HK: 700 Technical approved: Yes EU-approved until: 16.05.2026 Own weight: 14340 Total Weight: 30000 Payload: 15585 Width: 255 Length: 754 Rcjdpfx Agjxz N Drjzjk Euro: 5 Model: FH16 700 Kombibil Gearbox: Automatic

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter) Rcedod Nviqopfx Agzjk

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: O03009A) THROUGH-FEED MULTI-BORER “BIESSE” Techno Logic with CNC No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), No. 5 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 5 top pressing devices Rcedpfsw Uhbksx Agzok No. 2 endless screws to evacuate the wastes. Numerical Control Type CNI O03009B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno INFOR a C.N. No. 2 through-feed motorised belts, feeding speed up to 75 m/min No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) No. 2 Top pressing devices No. 2 endless screws to evacuate the wastes.

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Rcedod Nuwiopfx Agzek Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system Rodow Ug A Hepfx Agzock - Total installed power KW 5 ca.

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Rcjdpfxofz I Ufj Agzjk With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels