Used Interbus S for sale (67,659)

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager Hsdozg Tzxopfx Aqrsp The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Hjdpfxjzg Ty Ie Aqrsp For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Hsdpfx Aqezg Tw Torjp Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 617 h, load capacity: 3,000 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Automatic Condition: Like new Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Hjdpfszg Rc Hjx Aqrsp Battery voltage: 80V Battery year of manufacture: 2018 Description: Price includes a new UVV inspection. The battery will be regenerated using a power cycler, including a Kappa test. Charger with matching plug included. We will gladly arrange cost-effective transport for you. A lease-purchase option is generally available. We are an official Jungheinrich partner. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 369 h, load capacity: 2,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,500 mm, drive type: Diesel, Diesel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic Condition: As new Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Hsdpfx Aqozg Rcysrsp Rear tire type: Non-marking Rear tire condition: 80 - 100% Description: Price includes a new UVV inspection. The unit is in as-new condition, reflecting the few operating hours. We will gladly arrange cost-effective transport for you. A lease-purchase option is generally available. We are an official Jungheinrich partner. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate.

Condition: used, Year of construction: 2023, machine/vehicle number: H300SV23-17, pressing force: 300 t, stroke length: 1,000 mm, table width: 1,000 mm, table length: 1,200 mm, overall weight: 21,000 kg, die cushion force: 130 t, die cushion stroke: 300 mm, Control and basic data • Control: SIEMENS PLC • Pressing force / capacity: 300 t • Motor power: 30 kW • Year of manufacture: 2023 • Serial number: H300SV23-17 Hedozhlg Aspfx Aqrep Pressing area • Cylinder diameter: 380 mm • Stroke: 1000 mm • Tool dimensions (max.): 1400 × 1200 mm • Tool weight (max.): 5,000 kg Drawing cushion • Drawing cushion stroke: 300 mm • Drawing cushion force: 130 t Speeds • Feed speed: 160 mm/s • Return speed: 200 mm/s Hydraulics and connection values • Pump output: 103 l/min • Oil volume: 1100 l • Operating pressure: 243 bar • Operating voltage: 380 V • Frequency: 50 Hz • Max. current: 60 A The machine is available immediately, has already been dismantled, and can be inspected.

Condition: used, Year of construction: 1991, offer consists of: Horizon AC-8000 S air- suction collator with 8 bins - Format: max: 318x470mm, min: 148x210mm - missfeeding-, doublefeeding and jamming control Hedpfx Aszhlrljqrop - integrated jugger - bin pile height: 10cm - paper weight: 23-210g/qm - pile height: 10cm/bin - capacity: up to 2400 cycles/hour - dimension: 165x65x207cm - weight: 510kg - power: 3-phase 400 Volt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Hjdozhn Txspfx Aqrjp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 400 mm Travel distance Y :450 mm Travel distance Z: 350 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 HSCI spindle chuck: HSK-40 spindle revolutions: 42000 rpm Speed range to: 42000 U/min table size X: 400 mm table size Y: 400 mm max. workpiece weight: 100 kg Hjdpfx Aqsym Rr Ajrep tool changer: 68 - time input Power : 20 kW Torque: 30 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center designed for graphite machining Heidenhain iTNC 530 HSCI control 68-position tool changer HSK-40 high-speed spindle spindle speed up to 42,000 rpm KNOLL oil filtration system KF 400 / FKA 620 KNOLL chip conveyor ideal for electrode production high surface quality in finishing

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck range: 0-7 mm Weight: approx. 175 kg Hsdjzgr Eiepfx Aqrsp Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Hedpfxjw Dcccj Aqrjp

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Machine without tools Hsdpfx Aqsvvi Ttsrsp Location: Nattheim

Condition: used, Working width: approx. 1000 mm Hedpfx Ajy Rvqyeqrop

Condition: used, Year of construction: 2018, machine/vehicle number: 213357, Own weight: 710 kg, Power: 20 kVA Hsdpoy Rvrkjfx Aqrop

Condition: used, machine/vehicle number: 51918-1, Year of construction: 2013, max. load capacity: 15,000 kg, unladen weight: 3,020 kg Hedpfx Ajy Rvtnoqrsp

Year of construction: 2025, condition: new, functionality: fully functional, This is the latest generation iVario Pro 2-S from the premium manufacturer Rational, model year 2025. The iVario 2-S is new, unused, an exhibition model, and comes with a 1-year manufacturer's warranty. Installation by a Rational service partner extends the warranty up to 2 years. This multifunctional tilting frying pan is equipped with the optional pressure cooking feature. The base / accessory package can be purchased for an additional cost. Hodszg T Rmspfx Aqrep The list price (MSRP) for the iVario 2-S is: Net: €20,530 = Gross: €24,430. The list price (MSRP) for the base is: Net: €2,328 = Gross: €2,770.32. The list price (MSRP) for the basic accessory package is: Net: €1,002, Gross: €1,192.38. We offer special prices upon request! The unit has been inspected for functionality in our in-house workshop. You will receive an invoice with VAT shown. Service: We will gladly assist in arranging a certified Rational customer service technician nationwide. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our device service for you: Up to 2 years manufacturer's warranty High-quality branded devices at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-pickup options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: 1100 x 938 x 485 mm Power connection: V: 400 / kW: 20.5 / Hz: 50 Serial number: E11PK25078093595 Year of manufacture: 2025 Weight: 134 kg Capacity: 2 x 25 liters Servings per batch: 50-100 Condition: New, unused, fully functional Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, dairy and desserts, soups and sauces, or the 5 cooking processes: boiling, frying, deep-frying, stewing, and finishing. iZoneControl: flexible division of the pan base into zones with different temperatures Low-temperature cooking (also overnight), confit, sous-vide cooking Vario Cooking Control mode: the desired result of the product is selected with a touch of a finger, e.g. from light to dark. Vario Boost: patented heating system for absolutely uniform and precise temperature transfer. Programming mode: Creation of manual programs and management of cooking processes Integrated WiFi interface, e.g. for connection to ConnectedCooking Additional information: With optional pressure cooking function Integrated hand shower with automatic retraction and spray dosage High-quality pan base Seamless with rounded corners Core temperature probe with 6 measuring points 1,200 programs with up to 12 steps each, programmable and can be named Integrated hose shower on the device, integrated water drain in the pan Temperature unit can be set in °C or °F Cooking pan can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Shipping: Delivery or self-pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S Hodpfsyv Ahvox Aqrjp -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

Condition: as good as new (ex-display), Year of construction: 2025, Working width: 510 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2800 mm Dressing table adjustment: lever Gap removal indicator: scale Indication hollow - pointed joint: - Dressing fence angle adjustable: yes Motor power: 7 kW machine length: 2800 mm Machine width: 1000mm Weight: 800 kg Hsdpfel D Rwwex Aqrep

Condition: used, Year of construction: 1980, Spindle swiveling: No Sliding carriage: Yes Height adjustment: Handwheel Swivel adjustment: - Milling vice adjustment: manual Height indicator: Scale Swivel angle indicator: - Milling stop indicator: Scale Milling spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 Motor power: 5 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1200mm Machine depth: 900mm Weight: 600kg Hedpfxek Eakco Aqrsp

Condition: new, Year of construction: 2025, Edge banding unit: Yes Edge thickness: maximum 3 mm Workpiece thickness: from 8 mm - 50 mm Workpiece width: minimum 110 mm Glue pot: Granulate, quick-change pot Trimming cutter: yes Edge trimming / flush cutting: yes Routing station: Chamfer / radius Corner copying: yes Hedpfek Eai Uox Aqrjp Straight pull blade: Yes Radius pull blade: Yes Buffing unit: Yes Non-stick agent spray unit: Yes Infeed fence adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: new, Year of construction: 2025, Roll diameter: 533 mm Outrigger overhang: 510 mm Cutting depth: 350 mm Table can be swiveled: yes, -0 to +45° Table size: 750 x 530 mm Belt speed: 1400 m/min Motor power: 4.1 kW / 400 V Motor brake: yes / automatic Dust extraction connection: 2 x 120 mm Machine length: 998 mm Machine width: 530 mm Machine height: 1987 mm Weight: 273 kg Hsdpsh Ekx Sefx Aqrep

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Hedpfozgbmijx Aqrop Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18") Year: 2009 Consisting of Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Gantry system: Pfaff (yr 23) - Pump - Set up element: 3641 - Reject gate for incomplete products: 3714 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C15 S/35 (18") Year: 2009 Description: - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable Hsdsxdx Tnjpfx Aqrjp - 2nd premelter for spine glue unit: ICS C160 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 550 mm, total height: 2,000 mm, total width: 1,870 mm, overall weight: 3,200 kg, controller manufacturer: SIEMENS, product length (max.): 4,050 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2015. This Optimum OPTIturn S 600 features a turning diameter of 320 mm and a turning length of 550 mm. It includes a hydraulic turret with 12 tool slots and a spindle speed range of 30 – 4000 min¯¹. If you are looking to get high-quality turning capabilities, consider the Optimum OPTIturn S 600 machine we have for sale. Contact us for further details. Hodpfx Aqezg Eamsrsp • Turning diameter: 320 mm • Turning length: 550 mm • Swing diameter above machine bed: 550 mm • Swing diameter above cross-slide: 370 mm • Main spindle bore: 76 mm • Spindle bore with hydraulic chuck: 200 mm • Spindle taper: A2-6 • Drive motor output: S1 (continuous) 11 kW; S6-30% 14.3 kW • Turret type: Hydraulic VDI 30 • Number of tool slots: 12 • Rapids movement X/Y-axis: 30/36 m/min • Tailstock chuck: MT4 • Quill stroke: 80 mm • Quill diameter: 75 mm • Total rated value: 30 kVA Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), CTS TS-70/350-10/S Temperature Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/350-10/S Machine Type: Temperature Test Chamber / Stress Screening Test Chamber Test Chamber Volume: approx. 350 liters For sale is a used temperature test chamber from the manufacturer CTS. The system is suitable for temperature testing, stress screening, environmental simulations, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 10 K/min Temperature Change Rate (Cooling): approx. 10 K/min Test Chamber Volume: approx. 350 liters Test Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) Housing Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 750 kg Power Connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated Current: 25.7 A Protection Class: IP22 Refrigerant (Pre-cooling Stage): R404A, 4.0 kg Refrigerant (Cooling Stage): R23, 2.1 kg Operating Pressure: 25 bar Test Pressure: 27.5 bar Equipment Multi-touch controller with program generator Touch panel operation Viewing window in the door Interior made of stainless steel USB interface Ethernet interface RS232 interface Software temperature limiter Over-temperature test item protection Shelves / test chamber equipment as shown in the pictures Documentation and operating manual available Special Features Water-cooled design Cooling water connection required Compressed air connection required Operation only possible with connected cooling water circuit and compressed air supply Temperature testing Stress screening Hsdjzf Hz Nepfx Aqrsp Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery CTS TS-70/350-10/S temperature test chamber Existing documentation Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.