Used Internal Gears for sale (16,508)

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against Dkjdeiqkb Ropfx Ah Uow unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Dksdpstbawkofx Ah Uow Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: used, Year of construction: 2007, Technical details: pulling force - max.: 9 t Djdew Duggepfx Ah Uokw max. ram stroke: 2000 mm max. workpiece diameter: 900 mm total power requirement: 25 kW FRÖMAG electromechanically driven internal vertical broaching machines FSR guarantee economy and efficiency thanks to their special design features. Economy and efficiency. The drawbridge of the machine is designed so that broaching tool holders can be accommodated in accordance with market requirements. can be accommodated. The ball screws used to drive the drawbridge as well as the additionally hardened and ground round guides in conjunction with the together with the adjustable three-phase motors ensure that the machine runs very smoothly. Accessories such as feeds, shim controls, sliding tables, etc. make machine operation easier and enable machine operation and enable automation and integration into linking systems. *

Year of construction: 2019, condition: good (used), Block Helical Inline Gears Block Manufactur: NORD Drivesystems Model: SK 82 F year of construction: 2019 fabrication-N°: 202624919-100 Dkedpelkfzdsfx Ah Ujw Base weight: apr. 280 Kg The ad is being edited, more detailed specifications & Plant description will follow. Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french. Oussman-Machinery

Condition: good (used), Year of construction: 2005, functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 100 mm, workpiece spindle speed (max.): 90,000 rpm, controller model: Bosch Rexroth MTX, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Area of application: Hard machining Control: Bosch Rexroth MTX Djdpfxswi N Ngs Ah Uekw Working area Axes: 6 axes X1,Z1, X2 & Z2: Hydrostatic axes B1: Workpiece spindle P01: Internal loader Dimensions working area: 200 x 200 x 100 mm Spindle & tools Number of work spindles: 1 (1x internal grinding, 1x external grinding) Number of tools: 2 Tool holder: External wheel max. Ø500 mm, internal wheel for high frequency spindle Speeds Workpiece: max. 1,375 rpm External grinding wheel: max. 1,375 rpm Internal grinding wheel: max. 90,000 rpm (high frequency spindle) MACHINE DETAILS Machine dimensions (LxWxH): 3.9 x 2.7 x 2.62 m Machine weight: 6,050 kg EQUIPMENT - Part handling: Manual or with Baumann loader - Exhaust air: Extraction system from LOSMA - Units: Hydraulic and hydrostatic oil supply - Cooling unit for hydrostatics and high-frequency spindle

Condition: used, An internal cylindrical grinding machine with face grinding attachment, manufacturer VPUMARD, type 5A, machine no. 50030, equipped with coolant system and 4 spare spindles. Dkedowv A Ezopfx Ah Uow

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 25 A Dksdpegyd S Djfx Ah Uew Connected load: 5,5 kW The machine is completely revised and is therefore in a very good condition.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Dkodporb Akmjfx Ah Uow Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: used, Year of construction: 2000, Technical details: Dedow Dugaspfx Ah Ujkw pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm

Condition: good (used), HOLE DIAMETER: 1-100mm HOLE DEPTH: 230-350 mm PIECE DIAMETER: 360-500 mm PIECE LENGTH: 850-1000 mm PIECE HEAD INCLINATION: 15° PIECE WEIGHT: kg GRINDING WHEEL REVOLUTIONS: 18.000-24.000 al' PIECE SPINDLE REVOLUTIONS: 140-1120 al' POWER: kW Djdpfx Ahowf Hgbe Ujkw WEIGHT: 4,5 ton

Condition: used, Main Motors / Gears Dkodpfx Ahswazm Se Usw

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1024JT05VL, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, working range: 2,000 mm, overall weight: 19 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 500 rpm, throat depth: 2,000 mm, table height: 870 mm, table width: 800 mm, table length: 600 mm, Equipment: documentation/manual, VOLUMEC JoyTap 3150 - Thread cutting unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for Joytap - Supportive control for thread cutting 1. NEW ALUMINUM STRUCTURE developed with EXCLUSIVE Volumec profile, which provides greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for more smoothness and power 3. NEW GENERATION BRUSHLESS MOTOR (G2) with unmatched performance and reliability 4. INTEGRATED WIRING that does not limit mobility 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and thread cutting, updated with new functions and programmable torque (Nm) 6. MULTIDIRECTIONAL HEAD with automatic fixation 0-90° workpiece orientation 7. QUICK-CHANGE COUPLING SPINDLE THREAD CUTTING: Dksdsvr U Unopfx Ah Usw • AUTOMATIC THREAD CUTTING (setting of pitch - depth - speed - torque Nm to protect the tools) • THREAD CUTTING with PROGRAMMABLE chip breakage • MANUAL THREAD CUTTING (set speed - torque (Nm) to protect the tools) • THREAD COUNTING is carried out • PROGRAM MEMORY, password protected • Simple PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring applications • CONSTANT SPEED AND TORQUE when thread cutting thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 30 mm base made of milled steel and T-slots in the inner compartment

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1732, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI6DT Machine No.: 1732 Dkjdpfegyd Svsx Ah Usw Year of manufacture: 1960 weight: 3,2 to broaching force: 6.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4kW The machine is completely revised and is therefore in a very good condition.

Condition: used, Year of construction: 1966, Voumard 3A 1966 YEAR Dkedpfx Ast D Uxysh Usw

Condition: used, Technical details: Dsdpfx Ajwx Shkjh Ujkw honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Dkodpet Dv I Ajfx Ah Ujw Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: used, voumard Dkodpfjtzarnox Ah Ujw

Condition: used, Year of construction: 1983, Technical details: internal diameter: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,8 x 2,5 m max. workpiece weight: 15 kg clamping dia. max.: 140 mm clamping length: 250 mm max. bore diameter to be ground: 0,8-90 mm Djdpfx Ajr R Elheh Uokw min./max. hole to grind: 160 mm centre height: 90 mm workpiece spindle stepless: 112-1000 U/min

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Dkodpfx Ahjgyd T Ee Uew Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Dkjdpfjhpqquex Ah Usw Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Dksdpfx Ashad Avjh Uew Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Condition: used, Year of construction: 2024, Empty weight: 10 kg Part suitable for: trucks Dedpfx Ahsxumk Aj Uokw Type number: 532400, 234191, 421355, 60092970 ZF ASTRONIC OEM : 532400, 234191, 421355, 6009297007 Article nr.: N112003004-veiling Used ASTRONIC GEAR SELECTOR IVECO

Condition: excellent (used), mileage: 490,000 km, power: 265 kW (360.30 HP), first registration: 06/2008, fuel type: diesel, color: white, axle configuration: 6x4, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel, loading space width: 2,450 mm, loading space length: 7,000 mm, loading space height: 1,000 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, cruise control, differential lock, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Electric windows Dkjdpjxpiquofx Ah Uow - Air horn - Spare wheel - Toolbox - Power take-off (PTO) - Central lubrication system - Towing hook = Notes = 3x extendable crane = Additional Information = Technical Information Number of cylinders: 6 Dimensions (L x W x H): 1040 x 250 x 380 cm Drivetrain AdBlue system: Yes Transmission Transmission: 16 gears, manual gearbox Axle configuration Suspension: leaf suspension Front axle: steerable; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 1: twin tires; differential lock; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Reduction: outboard planetary axles Rear axle 2: twin tires; differential lock; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70%; Reduction: outboard planetary axles Functionality Crane: PALFINGER PK18000, year of manufacture 2008, mounted at the rear of the chassis Condition Technical condition: very good Visual condition: very good Further Information Please contact Andre, Henri, or Andre for more information.

Condition: used, Year of construction: 2009, operating hours: 61,804 h, machine/vehicle number: IntNr231413, CNC lathe Biglia B465 Y2 Year of manufacture: 2009 Operating hours: 20,627 h Powerful CNC universal turning machine with sub spindle and Y-axis. Control: Fanuc 31i-B Maximum turning diameter (bar machining): 65 mm Maximum turning diameter (chuck machining): 230 mm Turning length: approx. 250 (320) mm Maximum swing diameter: approx. 520 mm Main spindle (HSP): Spindle nose: 6" Spindle bore: 80 mm Speed: 4,000–5,000 rpm Sub spindle (GSP): Spindle nose: 5" Spindle bore: 55 mm Speed: 5,000 rpm Tool turret: 2 × 12 stations, driven Y-axis travel: ±50 mm Equipment: Dkodpfxjxrdg As Ah Uew 2 turrets, each with 12 tool stations and 24 driven tools 2 C-axes and 2 Y-axes CNCDB70 bar feeder by Giovanni Cucchi Workpiece discharge system with conveyor belt Chip conveyor with 2 pumps (each 7 bar) incl. filter Spray gun (4 bar) High-pressure pump 25 bar incl. filter Extended ejector 200 mm Complete technical documentation available The machine is fully functional, both electrically and mechanically, and can be demonstrated under power by prior appointment. Subject to prior sale. Technical data and specifications subject to change and error.

Year of construction: 2018, operating hours: 31,241 h, condition: like new (used), machine/vehicle number: IntNr231416, CNC-DMG Gildemeister MULTISPRINT 36 / SWISSTYPE machining up to 170 mm turning length Year of manufacture: 2018 Operating hours: 47,548 Machining time: 31,241 Status: October 2025 Control: Fanuc 30i B Maximum flexibility of the MULTISPRINT thanks to its modularity and Y-axes on every spindle position. Use of driven tools on all spindle positions. Y-axis available on all spindle positions as standard. SWISSTYPEkit for short and long turning up to 170 mm length. Chuck or bar machining: bars from 4 to ø 36 mm, chuck parts up to ø 50 mm. Double rear and off-center machining possible. Machine type: Multi-spindle automatic lathe SWISSTYPE machining: up to 170 mm turning length Control: FANUC Series 30i Maximum flexibility thanks to modularity and Y-axes on all spindle positions Use of driven tools on all spindle positions Machining: bars from Ø 4 – 36 mm, chuck parts up to Ø 50 mm Double rear and off-center machining possible Performance Data Feature Value Max. workpiece diameter 36 mm Max. workpiece length 170 mm Max. bar capacity 36 mm Travel (X / Y / Z) 50 / 100 / 170 mm Main spindles Number: 6 C-axes (angular resolution): 0.002° Cross slides: 6 × (X-/Y-axis) Travel Z1–Z6: 170 mm (with SWISSTYPE-Kit) Max. bar capacity: Ø 40 mm Spindle speed: up to 7,500 rpm Drive power (100% duty cycle): 3 kW Torque (100% duty cycle): 32 Nm Drum indexing time: 0.65 s Counter spindles / Pick-up spindles Quantity: 2 (C-axes with X-/Y-/Z-axis) Through bore: Ø 40 mm Spindle speed: 7,500 rpm Drive power: 3 kW Torque: 32 Nm Travel (Z7–Z8): 410 mm Travel (X7–X8 / Y7–Y8): 277 / 312 mm Rapid traverse speed: 40 m/min Tool holders on cross slides Max. number of tools: 3 Spindle speed: 3,900 / 8,000 rpm Drive power (100% duty cycle): 0.9 kW Torque (100% duty cycle): 5.8 / 2.9 / 1.7 Nm Travel (X1–X6 / Y1–Y6): 50 / 100 mm Rapid traverse speed: 20 m/min Dksdpfjxrc Rgex Ah Usw Slides for rear machining Spindle speed (U7–U8): 3,900 / 8,000 rpm Drive power: 0.9 kW Torque: 5.8 / 2.9 / 1.7 Nm Control display: 15" color monitor (×2) Clamping system: Hainbuch TOPlus 40 quick-change collet chuck Hinged belt chip conveyor with lift pump High-pressure oil system (filters 50 / 25 µm, pumps 5 / 12 MPa) Various tool holders Fire extinguishing system Bar loading magazine (surface loader design) Workpiece loading system The machine is fully functional both electrically and mechanically and can be inspected under power by appointment. Subject to technical changes and errors and prior sale!