Used Joystick for sale (884)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386J13957, Year of construction: 2018, operating hours: 12,866 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,610 mm, fuel type: electric, mast type: duplex, fork length: 1,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,140 mm Lifting capacity: 1,600 kg Free lift: 1,610 mm Fork length: 1,090 mm Minimum fork width: 250 mm Maximum fork width: 940 mm Number of wheels: 3 MACHINE DETAILS Mast type: Duplex Fuel type: Electric Battery type: 4 PzSH 500 Battery capacity: 500 Ah Battery voltage: 48 V Operating hours: 12,866 h Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,110 x 2,120 mm Unladen weight: 3,211 kg Transport packages: 1 EQUIPMENT Side shift Joystick Partial cabin Work light Documentation Gedpez D Urdofx Al Ujkc CE marking

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,709 h, 2011 | Bobcat S100 | Used Skid Steer Loader | 2,709 hours Location: Wisconsin, United States Delivery available to your destination. About this machine: Bobcat S100 skid steer with a Kubota diesel engine (33 hp net / 35.5 hp gross), rated operating capacity of 1,000 lb (457 kg). Cab with heat, mechanical suspension seat, and switchable ISO/H pattern joystick controls. 2-speed drive, manual quick tach, block heater, and foot throttle. ✔ Cab with heat ✔ Mechanical suspension seat ✔ EH ISO-H pattern switchable controls ✔ 2-speed drive ✔ Manual quick tach ✔ 48" general purpose bucket ✔ Auxiliary hydraulics ✔ Block heater ✔ Foot throttle ✔ 27x8.50-15 tires — 40% remaining Key specs: Engine: Kubota V1,505-E2B-BCZ, net power 33 hp (24.6 kW) Emission standard: EU Stage V / EPA Tier 4 Final Rated operating capacity (ROC): 457 kg (1,000 lb) Tipping load: 915 kg Operating weight (rear): 1,860 kg Hydraulic pump flow (loader): 50 L/min System pressure at couplers: 20,700 kPa Max travel speed: 10 km/h Fuel tank: 45 L What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection Gsdpfezxhyajx Al Uokc ✔ Instant shipping rates and worldwide delivery ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 606 h, 2016 | Bobcat T590 | Used Compact Track Loader | 606 hours Gksdpfxjz Atw So Al Usc Location: Illinois, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Compact track loader with an open station, joystick controls, standard-flow hydraulics, and a 66 hp 4-cylinder Kubota diesel engine. Equipped with rubber tracks with roller suspension, Paladin pallet forks, and a 74" combination bucket. ✔ Open station ✔ Joystick controls ✔ Standard-flow hydraulics ✔ 66 hp 4-cylinder diesel engine ✔ Rubber tracks with roller suspension ✔ Paladin pallet forks ✔ 74" combination bucket ✔ Hydrostatic powertrain ✔ ROPS Key specs: Engine power: 66 hp (net: 61 hp) Operating weight: 3,513 kg Rated operating capacity: 971 kg Tipping load: 2,773 kg Max. speed: 16 km/h (10 mph) Fuel tank: 138 L Hydraulic flow: 17 L/min Engine: Kubota V2607-DI-TE3B Emission standard: Stage V / Interim Tier 4 What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4ROLL DUAL PREPINCH, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 430 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness brass (max.): 50 mm, overall weight: 35,000 kg, total length: 6,100 mm, total width: 2,225 mm, total height: 2,700 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 7, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 3000 X 40 MM brand OMCCA YEAR 2009 DOUBLE INITIAL PINCH Machine used in working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 30 mm Godpfx Asz Rw R Dsl Uekc Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 430 mm One extra smaller upper roll D=350mm fast interchangeable • Hardening of the rolls high strength surface • All 4 rolls driven hydraulic powered rollers rotation • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate being formed • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and digital readout 3 axis. • Digital readouts of the rolls position and top support • Power electric 50 Hp voltage 3-phase 400 /50 • Dimension 6100 x2225 x H 2700 mm - weight 35000kgs Additional tooling with the machine Top central support motorized to hold in place the formed plate up to diameter 3500 mm Side support hydraulic dual articulation

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. Gsdpfoz Nhlijx Al Ujkc It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,068 h, 2023 | Bobcat T770 | Used Compact Track Loader | 1,068 hours Location: Illinois, United States Delivery available to your destination. About this machine: 2023 Bobcat T770 compact track loader with cab, heat/AC, selectable joysticks, and automatic ride control. Equipped with 2-speed drive, high-flow hydraulics, hydraulic quick tach, and 18" staggered C-block tracks with roller suspension. Comes with a rear camera cab cam system and Bobcat extended warranty through 2028. Equipment includes: ✔ Cab with heat/AC ✔ Selectable joysticks ✔ Automatic ride control ✔ 2-speed drive, high-flow hydraulics ✔ Hydraulic quick tach ✔ 18" staggered C-block tracks with roller suspension ✔ 79" smooth edge bucket ✔ Severe duty door (standard duty door also included) ✔ Rear camera / cab cam system ✔ Bobcat extended warranty through 2028 Key specs: Engine: Bobcat M3-Series, 4-cylinder, net power 92 hp (68.6 kW), Tier 4 Operating weight: 4,770 kg Bucket capacity (heaped): 1.9 m³ Hydraulic pump flow: 138.5 L/min Travel speed: 10.6 km/h Fuel tank: 165.8 L Net peak torque: 429 ft-lb (581.6 Nm) What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection ✔ Instant shipping rates and worldwide delivery ✔ Documentation support ✔ Secure transaction on every purchase Gkedpfozxh Ahjx Al Uoc

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: automatic, fuel type: diesel, empty load weight: 10,800 kg, lifting power: 3,500 kg/m, lifting height: 13,000 mm, Year of construction: 2007, operating hours: 4,870 h, Equipment: all wheel drive, cabin, onboard computer, pallet forks, 2 JLG 3513 telescopic loaders, model year 2007 Machine 1: (MACHINE 1 HAS BEEN SOLD) JLG 3513 Gsdpfx Aey Dznksl Ujkc Model year 2007 According to the hour meter: 4,871 hours 13 meters 3.5 tons Machine 2: JLG 3513 Model year 2007 According to the hour meter: 4,799 hours 13 meters 3.5 tons Both machines have the same equipment: - Perkins engine! - Powershift transmission! - Incl. forks - Mechanical quick coupler - Auxiliary circuit to the fork carriage - Hydraulic outriggers - Hydraulic leveling system - Cabin with heater - Lighting system with turn signals - Joystick control - All-wheel drive - 3 steering modes - Immediately ready for use - Good tires - Incl. CE Selling price: €23,900 net per machine! Affordable delivery also possible! New bucket or new work platform available at an additional cost!

Condition: used, mileage: 209,841 km, power: 200 kW (271.92 HP), first registration: 02/2015, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2015, Equipment: ABS, central locking, electric window regulation, power mirror, = Additional options and accessories = - Remote controlled central locking Gjdpfsy Rmlbsx Al Uskc - Reversing camera = Further information = General information Number of doors: 2 Technical information Number of cylinders: 6 Engine displacement: 7,800 cc Fuel type: Natural gas Weights Unladen weight: 16,025 kg Payload: 11,975 kg Gross vehicle weight: 28,000 kg Interior Interior: Black Maintenance, history and condition Number of owners: 2 Number of keys: 2 Product safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, lifting height: 7,300 mm, Year of construction: 2005, operating hours: 4,655 h, Equipment: cabin, DIECI 30.7 Runner telescopic loader Year of manufacture: 2005 According to the hour meter: 4,655 hours 3-ton lifting capacity 7.3-meter lifting height Iveco engine - Includes bucket - Integrated hydraulic side shift - Joystick control - All-wheel drive - 3 steering modes - Cab with heating - Lighting system with turn signals - Additional circuits at the rear - Ready for immediate use! Gedpfsz Ixvbox Al Ujkc Selling price: €21,500 (net) Affordable delivery also possible!

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: Gsdjzz Rc Ajpfx Al Uekc PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: used, Year of construction: 2020, operating hours: 1,391 h, Equipment: all wheel drive, * Now available: Bobcat S 100 * We are pleased to offer you the Bobcat S 100. * Condition: Used * Availability: Immediately in stock. Why choose Zirndorfer-Maschinenpark? * Official authorized dealer for Bobcat & Montabert * Family-owned business with over 45 years of experience * In-house workshop for guaranteed quality * Wide selection of new and used machines Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Would you like to trade in your used machine? We will gladly accept your machine under fair conditions. Attachments and accessories? We will be happy to offer additional attachments and suitable accessories on request. Sale to EU or non-EU countries? We will handle the entire process for you. ----Special features of the machine * 2 Speed * Joystick * Recently serviced * New UVV inspection * Bucket * Forks available at an extra cost ----Standard features of the machine: Double-acting auxiliary hydraulics * Kubota diesel engine * CE certification ----Trust in experience – a third-generation family business. Zirndorfer-Maschinenpark e.?K. – your partner for construction machinery. Contact us now and secure your individual offer.----Legal note: The information provided on the internet is a non-binding description. Gkedpfsz N E Stex Al Uoc It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors or data transmission errors. Subject to change.

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Gjdpfx Asyuy S Uel Uskc Type: F25 - 6D

Condition: ready for operation (used), functionality: fully functional, power: 74 kW (100.61 HP), fuel type: diesel, empty load weight: 6,450 kg, lifting power: 3,000 kg/m, lifting height: 6,000 mm, Year of construction: 2004, operating hours: 3,506 h, Equipment: additional headlights, all wheel drive, cabin, standard shovel, trailer coupling, Telescopic loader MANITOU MLT 630 Turbo Year of manufacture: 2004 3,506 operating hours according to the meter! 101 hp Perkins engine 4-speed torque converter transmission 3-tonne lifting capacity 6-meter lifting height - NEW bucket - Mechanical quick hitch - Auxiliary circuit to the fork carriage - All-wheel drive - 3 steering modes - Joystick control - Cabin with heating - Lighting system with turn signals - Immediately ready for operation! - Original paint! - Good tires! - incl. CE - incl. road approval Belgium Selling price: €23,500 net, including new bucket as shown in the photos! Pallet fork or light goods bucket available for an additional charge! Gjdpfx Aeyf Abysl Uskc Affordable delivery also possible!

Condition: used, lifting height: 9,000 mm, Year of construction: 2014, operating hours: 3,426 h, load capacity: 3,500 kg, Equipment: cabin, JCB 535-95 Year of manufacture: 2014 Approx. 3,426 operating hours JCB Eco Max 4.4-liter engine Without DPF or exhaust aftertreatment 3 control circuits 3 steering modes – front-wheel steering, crab steering, all-wheel drive Lifting height: 9 m Load capacity: 3.5 tons Price: €34,900.00 net Gkjdpfxoy Tz Dds Al Uoc Available at an extra charge: Earth bucket: €1,490.00 net Light goods bucket 2 m³: €2,100.00 net Light goods bucket 2.7 m³: €2,150.00 net Light goods bucket with double cutting edge (reversible blade) 2 m³: €2,250.00 net Light goods bucket with double cutting edge (reversible blade) 2.7 m³: €2,450.00 net Small work platform for JCB or Manitou, Claas, Merlo, 1.2 m wide: €990.00 net Large work platform, 2 m wide: €1,550.00 net Inspection possible at any time, by prior telephone appointment. All information is subject to change without notice.

Condition: used, Year of construction: 2007, operating hours: 13,800 h, lifting height: 4,430 mm, fuel type: diesel, mast type: duplex, fork length: 1,000 mm, fork width: 1,140 mm, total height: 3,010 mm, total length: 3,050 mm, total width: 1,190 mm, color: red, Empty weight: 6.815 kg Lifting capacity: 5.000 kg Gkjdpfx Alsy Exnws Uoc - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394U03600 - Operating hours: 13800 - Lifting capacity: 5000kg - Lifting height: 4430mm - Overhead clearance: 3000mm - Free lift: 0mm - Fork length: 1000mm - Maximum fork width: 1140mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin, Joystick - Mast: Duplex - Drive: Diesel - Motor brand: Linde ? - Transport dimensions: 3050mm x 1190mm x 3010mm (l x w x h) - Transport weight [kg]: 6815kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) Godpfx Ajz H Tmrel Uskc • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: used, functionality: fully functional, machine/vehicle number: 823xxxxx, Year of construction: 2000, operating hours: 6,952 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,556 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 800 mm, empty load weight: 3,368 kg, total length: 1,802 mm, drive type: Elektro, construction width: 1,238 mm, Reach truck Chassis number: 823xxxxx Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Impulse Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Polyurethane Front tire size: Load roller, polyurethane Rear tire type: Polyurethane Gkodpfxswhtche Al Uoc Rear tire size: Drive wheel, polyurethane Battery voltage: 48V Battery Ah: 560Ah Battery manufacturer: VHB/Jungheinrich Battery type: PzS Battery year of manufacture: 2000 Description: The unit is operational but is sold as is, as returned by the customer, without any warranty or guarantee. The forklift has NOT been repaired or refurbished and has also not been inspected according to UVV regulations, and may therefore have defects. WITHOUT charger. The sale is actually intended for dealers. In the event of a purchase, you accept the above conditions. Side shifter, 3rd valve, impulse control, full free lift, 800 mm forks, joystick, electric steering, fabric seat (glued seat surface), battery with Aquamatik (year of manufacture 2000, condition poor), WITHOUT charger! The unit is operational but is sold as is, as returned by the customer, without any warranty or guarantee, NOT refurbished and not currently UVV-approved.

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Colour: Grey Empty weight: 6.777 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Radio, Joystick, Heating, Work lights - Mast: Duplex - Drive: Electric - Battery information: Gkjdpfeymdx Njx Al Uec - └ Capacity: 930Ah - └ Battery voltage: 80V - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6777kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Gjdpfx Asz Hw Elel Ujkc Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,039 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: electric, mast type: simplex, construction height: 2,525 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Gkodpfx Aex Ixpgjl Usc Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: Brand new Front tires condition: New Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2015 Description: Overhauled, serviced, and inspected in accordance with FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, safety light, joystick, LED,

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis ZEISS Prismo Navigator 7 was manufactured in 2012. It features a maximum permissible error of 0.9 + L / 350 µm, ensuring high precision in measurements. If you are looking to get high-quality coordinate measuring capabilities, consider the ZEISS Prismo Navigator 7 CMM machine we have for sale. Contact us for further details. Gkodpfx Alez Hk Rhe Uec - Axis Travel / Measuring Range (X / Y / Z): 900 mm / 1500 mm / 700 mm- Maximum Permissible Error (E 0, MPE): 0.9 + L / 350 µm- Calibration Date: 16.05.2023- Next Inspection Expiry: 2023-10- Testing Body: 3D Lasertec GmbH, Aalen, Germany- SKU: AT-MEA-ZEI-2012-00001- Additional Components: Control console with twin joysticks, PC workstation, stylus rack/changer system, calibration sphere

Condition: used, mileage: 493,082 km, power: 205 kW (278.72 HP), first registration: 03/2005, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,300 mm, loading space length: 2,760 mm, loading space height: 400 mm, total length: 6,300 mm, total width: 2,300 mm, total height: 3,400 mm, Equipment: air conditioning, all wheel drive, crane, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Unimog U500 3-way tipper + Crane K 9501 (Vehicle 405) First registration: 16.08.2023 Mileage: 13,983 km Operating hours: 13,983 Engine capacity: 6374 ccm Power: 205 kW / 280 hp Engine: 6 cylinders Permissible gross vehicle weight: 15,000 kg, unladen weight: 9,100 kg, payload: 4,900 kg Overall length: 6,300 mm x overall width: 2,300 mm x overall height: 3,400 mm 2 x rotating beacon, 2 x signal horn, 2 x long-range headlights + 2 x work lights on roof structure Municipal hydraulics with 3 valves on the left and right sides at the front, non-pressurized return line at the front PTO at the front Mounting plate with towing hook at the front Snowplow control prepared 1 pair of standard lights + 1 pair of work lights on the A-pillar Leaf spring suspension 4x4 all-wheel drive Crane Palfinger PK 9501, manufactured in 2004, with 2 x hydraulic outriggers, series S-106-SK-A, Mpa 30.0 with 3 x hydraulic extension Crane control from below + remote control Rear-view camera 2 x LED reversing lights Trailer coupling Rockinger Tipping platform (3-way tipper) L: 2,760 mm x W: 2,300 mm x H: 400 mm, 6 x lashing eyes recessed in the tipping platform Tires 385/65R22.5, front approximately 40%, rear approximately 80/80% Air connections in red and yellow at the rear 3 x valves at the rear for hydraulics Gsdpfsz Rkr Uex Al Uokc 1+2 seat configuration Telligent M/A with folding clutch 2 x electric windows, 2 x electric mirrors + mirror heating Joystick control Hands-free phone system prepared Heated driver's seat Axle locks front and rear Headlight range adjustment Radio/CD Reinforced engine brake Rear-view camera with monitor Price: € 35,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting Gkodpoz N Hxhofx Al Uec - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: ZF WG211 automatic, 5/3 gears Condition: Ready for operation and fully functional Technical condition: very good Front tire size: 14.00-24 Front tire condition: 40 - 60% Rear tire size: 14.00-24 Rear tire condition: 40 - 60% Gedpez Rragjfx Al Ujkc Elme 584 sidespreader 20ft-40ft with hooks and hydr. clamp for double box lifting, +/-3° center levelling of spreader, hydr. sideshift +/- 600mm DE: hydr. extendable spreader support on lifting frame, lifting suspension via hydraulic accumulator, central lubrication system, automatic speed control depending on lifting height, mast inclination, and container clamp, electric engine preheating (230V), one-touch function on joystick for automatic spreader adjustment 20‘-40‘, driver's cabin with air conditioning and sun protection blinds, air-suspended driver's seat with headrest and heating EN: hydr. spreader support device on liftmast (for safety of container checker), lifting suspension by hydr. accumulator, engine pre-heater (230V), central greasing system, air condition, autom. speed limitation depending on lifting height and tilt angle of mast, one touch function on joystick for automatic spreading of spreader 20-40, air-cushioned driver seat, passenger seat, sun blinds at roof and rear windows condition: checked, repaired, serviced and cleaned = ready for work

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Gksdjz Nu I Dopfx Al Uec Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.