Kaeser cs 120 for sale
Identified location: Ashburn (US) (Edit)
KaeserCS120Screw compressor with V-belt driveMotor power: 75kWEnddruck: 8,5barDelivery quantity: 11,34m³/minScrew compressor in technically perfect conditionMotor has been re-stored.Big service (12000h) new.Operating hours: 33440Baujahr: 1991
Bftgb9lftp more
Manufacturer: BOKU
Machine number: 11848
Year of construction: 2011
- Stainless steel kettle/ stainless steel kneading arm
- 2 clocks/ 2 speeds
- Right- left rotation
- manual controller
- flour dust cover (completely intact and without any damage)
Pujfg3
- mobile
maximum batch sizes:
in dough: 120 kg
Weight: 450 kg
Technical data:
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 14 A
6 kW
- V-belt new
- Wiring and 16 A CEE plug new
Good condition, completely cleaned, technica... more
2015
used
good (used)
Here we offer you a temperature test Chamber.
Manufacturer: Noske-Kaeser
water cooled temperature cabinet
Room volume: 1000 liters
(From-40 ° C to 100 ° C) heating rate: 10 K / min
Cooling speed (from-40 ° C to 100 ° C): 10 K / min
Inqrx2i
Max temperature range:-50 ° C to 120 ° C
Aggregate is decoupled from the test Chamber, connecting via flexible lines
Rod programmer SE 402
two-stage water-cooled speed camera compressor for sufficient cooling capacity
Compressed air dryer, which prev... more
feed pressure: 11 bar
liter capacity: l
total power requirement: kW
volume capacity: 3,34 - 13,53 m³/min.
Number of working hours: h
control: interne Steuerung SIGMA
interface: RS 232 + 485 + Profibus DP
protection class: IP 55
noise level: schallschutzgedämmt dB(A)
rated capacity: 90 KW
machine weight approx.: 2020 / Gerät kg
dimensions L x W x H: ca. 2,2 x 1,3 x 1,95 / Gerät m
weight: ca. 1950 / Gerät kg
Oil-Injected Screw Compressor - unused /slight deformation on the sheet metal)
Consists ... more
2005
excellent (used)
KAESER CSD102SFC rotary screw compressor machine with inverter
Technical data:
capacity: 10.10 m3/min (10100L/min);
55 KW motor;
pressure: 8 bar;
year 2005
12799h!!!!!
Ysoj8s more
2009
excellent (used)
With built-in compressed air refrigerant dryer. Refrigerant R 134a. Variable speed drive. Volume flow 2.33 - 9.90 m3/min. With Sigma control.
Bixdvstsa3 more
2011
good condition (used)
KAESER CSD 85 Stand alone variable speed with full sigma control rotary screw compressor .premium efficiency IE3 drive motors fitted with DONALDSON ultrafilter refrigeration dryer. Can be visited and inspected as well in our ware house. For more information, contact us preferably by phone.
Bhskpoe8s3 more
Machine has hardly run so far, was an exhibit.
ᐸ 5000 operating hours
Bigc2qtyaz
All issued prices are exclusive of VAT and freight. Self-organized collection is preferred. Payment in advance. more
Compressors Kaeser screw compressor Cs 90
Used 1985
Do:
R9bsivpr
Kaeser Cs 90
Description:
Power: 55 kW / 75 hp
Working time: 25073 h
Standby hours: 98000h
Pressure 10 bar
Flow rate: 7.75 m3 / min
Machine size: 1.90 mx 1.20 mx 1.50 m
If you need more information. We are here to help! Please contact us using the contact form or give us a call
Your ad was automatically translated. Translation errors are possible. more
2002
excellent (used)
Screw compressor KAESER CSD 102 degree screw of the year 2010
Technical data:
performance: 10.10 m3/min (10100L/min);
engine 55 KW;
pressure: 8 bar;
year 2002/2010
Fphxgeua
process 11376h!! more
75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.
Yqkjiijo more
2010
used
Compressed air dryer PARKER HIROSS for compressor systemsRefrigeration dryer with water-cooled aftercooler for the removal of water vapour and cooling of compressed air or gases. 1 piece aftercooler type WFN009 DHH16Volume flow air normal: 540 m3/h = 9000 liter/min.operating pressure air: max. 16 barHousing length: 1020 mmHousing diameter: Ø 105 mmThreaded connection air: G 2 "Threaded connection water: G 3/4 "Weight of aftercooler: 11 kgDimension of aftercooler L x W x H 1030 x 850 x 200 mm 1 p... more
With this extension, your CNC milling machine will get a fourth axis. This allows you to create engravings on round objects, for example, or you can also mill curves and implement 360 °-milling work.
This high-quality and high-precision axis with a worm drive is even suitable for milling metal. This allows you to perform 3d processing in almost all materials.
The axis of rotation can also be used as a rotary table, as it may be fixed vertically or horizontally by appropriate fixing holes.
Bcs3... more
Bepex GCS 300/120 granulating machine, inclusive:
-Roller drive motor with starting coupling
-Stepless Variator
-Housing of the elastic coupling
-22kW
Bcmuc3ijda
-Two-shaft gearbox
-Granulating head with rollers
-Hopper
-Glasses
-Cutting device
-Chute for granules
-Frame more
2014
unexamined (used)
Rotary shear with a cutting chamber of 600x1200 mm and a drive of 2x 11 kw
Bfpcd3jomy more
2015
excellent (used)
Barely used double-acting 700BAR / 10 000PSI pump for sale, mint condition:
Double-Acting Max Output Gasoline Powered Pump PG1200M-4D
FEATURES:
Two-speed high performance pumps ideal for construction, structure moving and rigging applications.
A logical choice at work sites where electricity or compressed air are unavailable.
Powered by a Honda 4-cycle, 5.5 hp engine with automatic decompression and electronic ignition. Deliver over 1/2 gallon (130 cu. in.) of oil per minute at 1... more
ready for operation (used)
Culter
Working width 115mm
Working depth 12-18cm
Weight with teeth 95Kg
Number of teeth 7
Driving force 18-25HP
ps : picture deviates, these are galvanized.
Bjs9evjoef
more
Type: ACS 60100503000C1200000
Manufacturer: ABB
Year of construction: unknown
documentation:
Inspection: yes
Bhc28dqftp
Storage location: Warehouse Warburg
Status: used - good
Power: 380 V - 74 A / 415 V - 60 A
Accessories: Control panel
height: 680 mm
width: 310 mm
depth: 350 mm
Frequency: 48 - 63 Hz (input)
Frequency: 0 - 300 Hz (output)
Power: (max. approx. 20-25 kW) more
new
Important and distinguishing design features of the RaptorX SL steel base gantry machine
RaptorX-SL1200/S15
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Use the system as a plasm... more
We offer a wide spectrum of electronic parts for Elumatec machines
new- and refurbished parts with 2 years warranty
Cqbak72bk
"plug and play" with suitable firmware and parameters for all
Elumatec machines
See catalog attached
SBZ 122, SBZ 130, SBZ 140, SBZ 150 more
new
Important and distinguishing design features of the RaptorX SL steel base machine
A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to wor... more
new
Important and distinguishing design features of the RaptorX SL steel base machine / gantry
RaptorX-SL1200/S20
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost).
The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials.
Use the system a... more
feed pressure 10 bar
liter capacity 260 Liter/min.
Jvo3zy
motor 230 Volt
power capacity 1,3 kW
revolutions per minute 2.850 U/min
weight of the machine ca. 40 kg. more
1995
used
Oil-water separation system for compressors
Qksqxaz2p
-Plant for the separation of oil from water
-Rated power approx. 10 liters / h
-Operating voltage 380 volts more
Machine-No. 14653
Max. cutting 4400 mm
Max. saw blade projection 122 mm
Lift table 4400x 2200 mm
Height of the pile of boards 520 mm
Min.size of boardt on lift table 1830x915 mm, thickness 10 mm
Grippers on pusher beam 6 pieces
Gripper opening max. 103 mm
4 Air cushion table 2050 x650 mm
Main saw motor / diameter 17,5 kW / 430 mm
Scoring unit motor / diameter 2,6 kW / 200 mm
Automatic saw height adjustment
Saw carriage feed 1-130 m/min
Nzxen
Reverse feed 130 m/min
Pusher fee... more
feed pressure 10 bar
volume capacity 0,9-286 m³/min
Gcxzu3v
total power requirement 18,5 kW
weight of the machine ca. 800 kg
dimensions of the machine ca. 1680x950x1520 mm more
2016
good condition (used)
Kaeser Aircenter SM 15 11 bar screw compressor BJ 2016
Manufacturer: Kaeser
Type: Aircenter SM 15
Year of construction: 2016
Operating hours: 951h
Load hours: 320h
Max. operating overpressure: 11.0 bar
Delivery quantity: 1.26 m³/min
Nominal motor power: 9 kW
E29mpvv3k
Tank capacity: 270 litres
Compressed air connection: G 3/4″
Electrical connection: 400V / 3Ph / 50Hz
Electrical power: 9.32 kW (total incl. refrigeration dryer)
Dimensions WxDxH: 630mm x 1,200mm x 1,716mm
mass: 410 kg
Sound pressur... more
2004
used
Compressed air dryer Make: KAESER Type: TB 26Year: 2004 Max. pressure: 16 barCooling material: R134a
Bseumbvy more
used refrigerant dryer
Year of construction: 2001
Ysmit8
Technical data :
Volume flow 0.6 m³/h
Refrigerant: R 1354a
filling weight: 0,290 kg
Operating pressure HD: 18 bar
Operating pressure: 16 bar
Ambient temperature: min. 5 / max. 43 degrees
enn voltage 230 V 7 50 Hz
availability: short term
Storage location: Röllbach more
used
Screw compressor, compressor, compressed air unit, stationary air compressor
Beuq0rq0la
-Screw compressor with refrigeration dryer
-Delivery quantity 0,97 m³ / min
-Motor power 7.5 kW
-max. Pressure 11 bar
-Dimensions 610/760/H1290 mm
-Weight 260 kg more
2010
excellent (used)
Screw compressor with air dryer, only approx. 2434 load hours
Screw compressor:
Kaeser SM 9 with high-quality Sigma Control (optional accessory)
Year of manufacture 2010
400V, 5,5kW
Final compression pressure 11bar
volume flow 0,9m³/min
Engine running hours: approx. 8542
Load hours: approx. 2434
dimensions approx. 630 x 750 x 1100mm, approx. 200kg
Operating instructions
CE mark
Dryer:
Kaeser TA11
Year of construction 2014
230 volts
Refrigerant R134a
Thermostat control
Integrated condensate drain... more
Make Kaeser Kompressoren, Type WVC-4000, No 1016, New 2010, Material Mild steel, Pressure buildup 0.05 Bar, Blower (1x), Capacity 61,1 m3/min, Motor 11 KW, 400/690 Volt, Inlet dia. 200mm, Outlet dia. 200mm, Floorspace 1,5x0,55 M, Total height 0,5 M, Weight 480 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Nethe... more
2015
excellent (used)
Rotary screw compressor KAESER
TYPE: SM 9/ 11 bar
Year of construction: 2015
condition: used
Operating hours: 8802
Load hours: 4125
soundproof, air-cooled
Delivery quantity 0,75m³/min
Max. Pressure: 11 bar
Ft0w3w2 more
2008
used
Piston compressor Kaeser type KCT 401
Nxrkim32
Series. No. 2695 year 2008
Article No. 1.3497.10130
Suction volume of 400 litres / min.
Quantity 250 litres / min.
Pressure 8 bar
Boiler capacity 100 litres
Engine capacity 2.4 kW
Power supply 400 Volt, 50 Hz (with 16 amp. Plug)
-2 cylinder oil-free
-galvanized air boiler
-Mobile
Dimensions L x W x H 1300 x 500 x 950 mm
Weight 100 kg
good condition more
used, good condition
manufactured by Kaeser
type TA 11
built in 2005
Masch.-No. 1.7903.50010 / 3106
CE tested for type examination
air capacity 1,25 m³/min.
max. allowed pressure 16 bar
located in 97447 Gerolzhofen, free on truck, unverpackt
sale in current condition as seen,
Fko0eccpk
without revision,
without guarantee and Gewährleistung more
2009
used
Screw compressor, compressor, compressed air unit, stationary air compressor
-Screw compressor with refrigeration dryer
-Delivery quantity 1.01 m³ / min
Beuq0h9uw9
-Motor power 7.5 kW
-Max. Pressure 11 bar
-Operating hours h
-Load hours h
-Year of construction 2009
-Dimensions 630/1040 / H1085 mm
-Weight 286 kg more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Sponsorship of Michael van Gerwen and TV advertising
Container Numbers Decline by 9 Percent Due to Corona – 15 Facts That Will Surprise You
Photo gallery: The World's 10 biggest excavators
Sample sales contract for used machines in nine languages
