Used Kaltenbach Hdm 800 for sale (113)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg Dodpsrmkl Asfx Ah Uecp - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: used, Year of construction: 1990, machine/vehicle number: AGH597, 1x Mobile Pillar Slewing Crane, Travelling Crane Type: WK1 - Year 1990 Load capacity at full outreach: 250KG / 0.25t Construction height: approx. 3.45m, outreach: approx. 2.5m Hook height: approx. 2.8m, lower edge of jib: 3.25m Base size: approx. 110x110cm Pillar with counterweight incl. ABUS 250kg GM chain hoist (year 2023), plus cable trolley and accessories Total weight approx. 3300kg (counterweight approx. 3000kg) Dcedpfxsxdvlhe Ah Usp Connection: 400V, slewing range: 270° Used condition, fully functional. Item location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale. See photos Shipping via freight forwarder or pickup

Condition: good (used), Year of construction: 2000, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Dcedpfxsw Rz Shj Ah Usp Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Dcjdpfeq Ukvxex Ah Ujp Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Dcjdpfjxcf T Eex Ah Uep Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg Dcodpfjd N H A Njx Ah Uep good condition

Condition: used, Year of construction: 2008, machine/vehicle number: 81266- V 80381, Lg.no. 24394 Hydr. rotary and tilting welding table - Four-axis welding manipulator Dodpfxsugtiuj Ah Uecp Technical data: - max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. Table height in horizontal position approx. 1070 mm - Face plate can be rotated + swiveled or tilted - Faceplate can be moved horizontally + vertically, travel 1250 mm - Rotation electr. infinitely variable - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Manual remote control for speed regulation - E. foot switch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg

Condition: like new (used), Year of construction: 2018, machine/vehicle number: AGH632, 1x Mobile Column Slewing Crane (Mobile Jib Crane) Type WK1 - Year 2018 Load capacity at full outreach: 160 kg / 0.16 t Construction height: approx. 3.65 m, Outreach: approx. 4 m Hook height: approx. 3.1 m, Lower edge of jib: 3.4 m Base size: approx. 110x110 cm Including trolley with drawbar!!! Column with counterweight including ABUS 160 kg GM electric chain hoist, cable drag chain, and accessories Total weight approx. 3,500 kg (counterweight approx. 3,300 kg) Connection: 400 V, Slewing range: 270° Very good condition, almost as new, fully functional. Item location: 75053 Gondelsheim Dcsdpfsxdvf Iox Ah Uep Only the crane system visible in the pictures is being sold. See pictures. Shipping via freight forwarder or pick-up.

Condition: ready for operation (used), Machine is disconected from power. Dsdpfx Ahohva I Ij Uocp

Condition: excellent (used), KKS 450 Semi-automatic, hydraulic universal circular sawing machine with rotary table for miter cuts SAW BLADE Segment saw blade ☐ 400 x 4 ☒ 450 x4 mm Saw blade holder according to DIN 8576 50/4x14/80 mm WORKING RANGE Round material 90/45° 125 150 mm Square material 90° 115 140 mm 45° 110 130 mm Dcjdpfeub Dc Isx Ah Uep Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles upright 90/45° 120 x 55 140 x 60 mm horizontal 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Section lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW CUTTING SPEED SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED according to table infinitely variable 0 - 1,000 mm/min Rapid return saw blade 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Dsdpfoxb Aqxox Ah Uscp Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: used, Column-mounted semi-automatic bandsaw METORA - KALTENBACH type HMB 380 DS only for 90° cuts (Made in Austria) Machine. No. 4580028 Year of construction approx. 1993 Cutting area round Ø 380 mm Square 380 x 380 mm Saw blade dimensions 5650 x 34 x 1.1 mm Saw blade speed 25-108 m/min. infinitely variable Material infeed height 870 mm Hydraulic drive power 1.5 kW Saw motor drive power 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic band saw in two-column design - Hydraulic saw arm lowering with infinitely variable cutting pressure adjustment - Infinitely variable lowering speed - Hydraulic vice clamping, bundle clamping - Hydraulic unit integrated in the machine base frame - Material feed roller on the infeed side with geared motor - Coolant unit with cooling lubricant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for cooling water and hydraulics Dcedpodzqtgefx Ah Uep - TRENNJAGER type EX-Stop1 cross-cut fence, with handwheel adjustment, digital display and hydraulic fence carriage clamping Fence overall length 6750 mm, fence travel 5650 mm, fence arm can be folded up hydraulically without roller conveyor Space requirement of the basic machine L x W x H 2800 x 1400 x 2450 mm Weight of the machine approx. 3 tons Weight of the stop system approx. 800 kg good condition

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm Dcsdpfx Ahjwk Icbo Usp - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: like new (used), Year of construction: 2018, machine/vehicle number: AGH631, 1x Mobile Column Slewing Crane, Traveling Crane Type WK1 - Year 2018 Load capacity at full outreach: 100 kg / 0.1 t Dsdpfsxdvfusx Ah Uscp Overall height: approx. 3.65 m, Outreach: approx. 4.7 m Hook height: approx. 3.1 m, Lower edge of jib: 3.4 m Base size: approx. 110x110 cm Including trolley with drawbar!!! Column with counterweight incl. ABUS 100 kg GM chain hoist, cable drag chain, and accessories Total weight approx. 3500 kg (Counterweight approx. 3300 kg) Connection: 400V, slewing range 270° Very good condition, almost as new, fully functional. Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold See pictures Shipping by freight carrier or pick-up

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Dcedpfx Ahsd Tp Nle Ujp

Condition: good (used), Sawcapacity at 90 degree: Round: Ø303 mm, Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm, Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm, Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm, 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Dcedpfxeugtqro Ah Uep Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Dcodpfx Ahexb Aqfe Ujp Shipping possible on request Forklift available for loading.

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Dcsdpfxjwa Tile Ah Uep

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm Dedpfog A Rgfjx Ah Ujcp - flat up to 260 x 60 mm - mitre adjustment left + right 0 - 90 ° - cutting speed 1750 / 3500 m/min - feed speed of the saw blade 0 - 3 m/min - rapid return 3000 mm/min - Saw drive 400 V / 3,7 / 4,4 kW - 2 pieces pneum. Material clamping vices with adjustable clamping pressure - space requirement approx. W 1200 x H 1900 x D 1200 mm - weight approx. 600 kg

Condition: good (used), Year of construction: 1968, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speed 30, 60, 130 and 260 m/min Motor power approx. 2.6 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Dcsdpsrwyfqjfx Ah Ujp Weight 850 kg Accessories / Special features: - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Hydro-pneumatic stepless saw blade feed - Mitre cut on both sides R - L - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Piła Kaltenbach Kaltenbach KBR 371 NA/ABG rocznik 2004 sterowna numerycznie CNC Sterownie: Siemens Piła w pełni automatyczna z podajnikiem materiału dwustanowiskowym. Podajnik materiału z magazynem w pełni automatycznym. Dcjdpfx Aewqr Ubeh Ujp W pełni sprawna w bardzo dobrej kondycji -serwisowana.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw Dcodpfxeubbw As Ah Usp for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Dcedowt Tkvopfx Ah Uep

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cutting diameter 120 mm Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Dodpebwl Emsfx Ah Uocp Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides - Longitudinal cut 0° - Spray lever device Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Dedpfev Hgkqox Ah Ujcp