Used Kasto Hbs 1 for sale (126)

Condition: used, Year of construction: 2005, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm Hedpfx Aoxz Hhbegzeg capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg dimensions 1,2 x 0,8 x 1,0 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds Hjdpfsuqgbtox Agzsg - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Year of construction: 1975, cutting diameter 150 mm band length 300 mm cutting range - flat - 170 x 150 mm strokes per minute 85 / 170 cutting speed 16 / 32 m/min Hodpfewntygsx Agzsg dimensions of saw-blade 300 x 30 x 1,5 mm work height max. 695 mm total power requirement 1 kW weight of the machine ca. 0,169 t dimensions of machine L x W x H 0,77 x 0,70 x 1,33 m Accessories: coolant

Year of construction: 2022, condition: as good as new (ex-display), Hacksaw Make: KASTO Model: KASTOhbs 2 Machine No. 1132 106 517 Year of manufacture 2023 - Demonstration machine Cutting speed: 16/32 m/min. with warranty equipped as standard with: Hsdpsfgg Tpjfx Agzog - two cutting speeds - saw feed, infinitely variable - Pendulum vice - Automatic limit stop - Coolant device - Operating instructions

Condition: used, Year of construction: 1987, Technical details: cutting diameter: 520 mm saw band length: 7239 mm cutting width: 520 mm sawing motor: 5,5 kW cutting speed: 20 - 130 m/min cutting width at rectangle material: 520 mm total power requirement: 9,5 kW weight of the machine ca.: 3,8 t Machine with multi feed device chip conveyor infeed roller stand * Hsdpfx Asvb Dqqsgzog

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen Hodpfxjv Sfp Aj Agzsg spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm Hjdpfx Aewvbk Asgzsg *

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Hjdpox Nm A Dsfx Agzog Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Hjdpfx Agjx I Siyjzsg Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Hedpsxbhm Sofx Agzeg

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm Hodpfx Aexb Edzsgzjg cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Hsdpexpymaefx Agzjg Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Bandsaw with infeed and outfeed conveyor Hedpsx Hx Adjfx Agzeg Make: KASTO

Condition: good (used), Year of construction: 2001, Machine-Details : Stock-No. 1022-2408 Type of machine Band Saw - Automatic - Horizontal Make KASTO Type POS A 2 Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : cutting diameter 280 mm saw band length 4930 mm cutting width 280 mm capacity 90 degrees: square 280 x 280 mm saw diameter min. 10 mm cutting length min. 6 mm Weight of Material maxium 400 kg/m cutting speed 20 - 110 m/min sawing motor 2,2 kW dimensions of saw-band 4930 x 34 x 1,1 mm total power requirement 7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2280 x 2680 x 2050 mm Additional information : Shortest Remaining Piece Length in Single Cut 15 mm Shortest Remaining Piece Length in Automatic Operation 80 mm Hjdpfxsx Niale Agzjg Feed Length 700 mm Multiple Feed Length 9999 mm Cutting Speed Infinitely Variable 20-110 m/min Cutting feed: Infinitely variable Material clamping: Hydraulically infinitely variable, clamping pressure: 20-60 bar Equipment: CNC control Machine roller conveyor, dimensions: 2000 x 550 x 700 mm, weight: approx. 150 kg Machine documentation

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hsdpex I Sitofx Agzeg Technical features & accessories: - Roller conveyor - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Hodpox Irx Iefx Agzog Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Hjdpfx Aexb Edusgzog Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Year of construction: 1989, condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW cutting speed 20-130 m/min min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t dimensions of the machine ca. 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously Hsdpfxjrc I H Ej Agzeg variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept Hedpfsuizlcex Agzeg The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: good (used), Year of construction: 1980, functionality: fully functional, Band Saw Kasto BSM 420Article number: 19-03-028Manufacturer: KastoGood overall conditionMachine workshop-testedDelivery time: Immediate - Sale subject to prior saleYear of manufacture: approx. 1980Dimensions (L x W x H): approx. 1300 x 800 x 1400mmWeight: approx. 1000kgSaw blade dimensions: approx. 650 x 55 x 2.5mmCutting area: 90 degreesRound: approx. Ø420mmSquare: approx. 300 x 300mmFlat: approx. 420 x 420mmCutting area: 45 degreesRound: approx. Ø320mmSquare: approx. 260 x 260mmFlat: approx. 320 x 260mmMiter cutting: approx. 0-45 degreesAccessories:Adjustable cutting pressureAdjustable stroke rateCoolant systemFoot switchRotary tableFurther accessories on requestPrice and additional technical data on request Hjdpowl Aprefx Agzog

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Hjdpfx Agsfym Ewszog Machine little used in good condition.

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW Hsdjvmtdkspfx Agzeg weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Year of construction: 1976, condition: used, cutting diameter 460 mm saw band length 4623 mm Hodpfx Agsrc I Htszog table height mm 0 4 kW cutting speed 8-80 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 2,3y2,7x2 m

Condition: good (used), Year of construction: 2000, Hacksaw, KASTO, Type: PSB 280U, Year 2000 Cutting range: Round max.: 280 mm Flat max.: 280 mm x 160 mm Square max.: 240 mm x 240 mm 2 motor speeds Transport weight approx. 500 kg. With miter cut, length stop, coolant system, machine documentation available. Machine in good technical and visual condition. Hjdpfx Aowgnk Rsgzog

Condition: excellent (used), Year of construction: 2012, KASTO circular saw, type: radial M6, year of manufacture 2012 In very good condition, like new. Barely used. Cutting range: Circular max: 90 mm Hsdpfewah E Uex Agzog Cutting speed: 26/53 m/min Saw blade: 315 x 2.5 x 32 mm Coolant system. Weight approx. 210 kg. Machine documentation available. For further information, see data sheets.