Used Kel Varia for sale (1,420)

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm Godpfeikbtnox Aa Aobk table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Gjdpjxxamxjfx Aa Ajbk Inspection An inspection under power can be arranged at any time by appointment. Condition: Used condition consistent with age and prior usage Known defects: X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps Gbsder D T Uyopfx Aa Aok - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: reconditioned (used), Year of construction: 2011, CNC Vertical Machining Center DECKEL MAHO DMF 260 linear, NEW DMG Design With Siemens 840 D path control with Shop Mill Year of manufacture: 2011 Travel distances: X 2600 mm Y 700 mm Z 700 mm Spindle speed range: 20 – 14,000 rpm, stepless (SK 40) Gbjdpfx Aeyvvlnja Aok Including the following accessories: - Rigid angle table, 2920 mm x 750 mm clamping area - Controlled swivel milling head (B axis) - NC rotary table by Hofmann with tailstock, center height: 200 mm - Vertical tool changer with 40 magazine slots (SK 40) - Electronic handwheel - Full enclosure with sliding doors and interior lighting - Coolant high pressure system, 40 bar - Chip conveyor - Operating modes 3 + 4 - 2 x Rotoclear (rotating viewing window) - Partition wall - Coolant system - RITTAL control cabinet cooler - 4 height-adjustable machine feet - Operating manual

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Measuring range X-axis (tool diameter) approx. 400 mm Measuring range Z-axis (tool length) approx. 400 mm Max. tool weight 10 kg Tool holder/base holder SK 50 Tool adapter SK50 to SK40 with calibrated calibration balls Digital display with operating instructions/manuals Well-maintained tool presetter in very good condition. Gsdpfjyyyd Aex Aa Aobk

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 30000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, Gbsdpfxswzx Nms Aa Ajk no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control Gjdpfoxlghpex Aa Ajbk - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available - Inspection by appointment possible

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², Hunkeler RW 6 TECHNICAL DETAILS Standard Paper Weight: 40–300 g/m² Paper Weight with Edge or Center Trim: 50–120 g/m² Roll Width: min. 165 mm Roll Width: max. 520.7 mm Roll Diameter: max. 1,370 mm Roll Diameter with Edge or Center Trim: 1,300 mm Edge Trim Width: 8–40 mm Roll Weight: max. 800 kg Speed: 10–100 m/min Speed with Edge or Center Trim: 10–90 m/min Note on Speed: > 150 m/min from at least 200 mm roll diameter MACHINE DETAILS Rated Current: 7 A Active Power: 1.1 kW Apparent Power: 1.5 kVA Ambient Temperature: 10°C to 32°C Relative Humidity: 15% to 85% Optimal Ambient Temperature (as per paper specification): 18°C to 24°C Optimal Relative Humidity (as per paper specification): 40% to 60% Weight: 694 kg Hunkeler UW 6 TECHNICAL DETAILS Paper Weight: 40–300 g/m² Roll Width: min. 165 mm Roll Width: max. 521 mm Roll Diameter: max. 1,370 mm Roll Weight: max. 800 kg Speed: 10–100 m/min Rated Current: 4 A Active Power: 720 W Apparent Power: 950 VA Ambient Temperature: 10°C to 32°C Relative Humidity: 15% to 85% Optimal Ambient Temperature (as per paper specification): 18°C to 24°C Optimal Relative Humidity (as per paper specification): 40% to 60% Weight: 648 kg Gbedoyzppdepfx Aa Aok Hunkeler RW 6 Vacuum Buffer TECHNICAL DETAILS Web Width: min. 165 mm Web Width: max. 521 mm Paper Weight: 50–180 g/m² MACHINE DETAILS Ambient Temperature: 10°C to 32°C Relative Humidity: 15% to 85% Optimal Ambient Temperature (as per paper specification): 18°C to 24°C Optimal Relative Humidity (as per paper specification): 40% to 60% GENERAL EQUIPMENT Configured for online operation with OCE Variostream 8650 roll printer.

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Gjdpfxeyuzg Ho Aa Asbk Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg Gedpfx Aotqqtbsa Aebk quill stroke 80 mm spindle drive 9,5 kW total power requirement 20 kVA weight of the machine ca. 4,6 t dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg Gbedpfstqqlljx Aa Aok quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: excellent (used), Electric motor from Kaltenbach Maschinenfabrik for sale Price applies to 1 unit Condition: used, fully functional Motor tested with measuring instrument Normal signs of use and storage visible Technical data Manufacturer: Kaltenbach Maschinenfabrik Type: DKV 112M 238 4 Three-phase motor Power: 1.7 / 2.6 kW Gedpfxeyv Uvxs Aa Ajbk Voltage: 400 V, 50 Hz Protection class: IP54 Insulation class: F Speed: 700 / 1415 rpm Dahlander multi-speed motor Shaft diameter approx. 28 mm

Condition: excellent (used), For sale: Electric motor from German manufacturer Dietz Motoren GmbH Condition: Used, in good technical condition Motor is fully functional Visible storage marks and rust present on the housing and flange Visual condition as shown in the photos Godpfeyv Uvfjx Aa Aebk Technical data Manufacturer: Dietz Motoren GmbH Model: FDR 132SB 2Q Power: 7.5 kW Speed: 2920 rpm Supply voltage: 380 V Current: 15.5 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty cycle: S1 Approximate dimensions Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Ideal for pumps, fans, industrial machinery, and drives

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Gbjdpsyv Uuzsfx Aa Ajk Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts

Condition: new, For sale: Industrial electric motor, 7.5 kW, flange-mounted design. The motor comes from warehouse stock and has never been used. Visible storage marks and significant rust on the housing – condition as shown in the photos. Ideal for industrial applications, pumps, fans, machinery, and production equipment. Gedpeyv Utkofx Aa Asbk Technical data: Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 380–420 V Frequency: 50 Hz Power supply: 3-phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 65 kg Flange-mounted design Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: New old stock Never used Visible rust on the housing

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Specifications: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Gbjdpeyyn Ehjfx Aa Aok Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: new, For sale: professional electric motor from the renowned German manufacturer Bauknecht Antriebstechnik. Gsdpfx Aaoyv R Tgj Aebk The motor is brand new – ex-stock. It has never been used in operation and may have only minor storage marks visible in the photos. Robust, industrial-grade construction – ideal for demanding applications. 🔧 Technical specifications: Manufacturer: Bauknecht Antriebstechnik Model: 3~Mot 160M Power: 11 kW Speed: 2930 rpm Voltage: 380 V Current: 22 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty type: S1 (continuous) Cos φ: 0.88 Design: IMB5 (flange-mounted)

Condition: used, Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, quill stroke: 80 mm, overall weight: 2,590 kg, table load: 450 kg, input voltage: 380 V, See AMG machine card Control Dialog 11 Godpfxsyynrus Aa Ajbk

Condition: new, For sale: professional electric motor from the renowned German company VEM motors GmbH Model KTTR 132 SX2 The motor is new, stored in a warehouse, and has never been used. Gjdpfx Asyv R Rfsa Aobk Very good condition, with possible minor signs of storage. Technical data: Power: 7.5 kW Speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Current: 14.5/8.4 A cos φ: 0.86 Protection rating: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Made in Germany Applications: – Industrial machinery – Pumps – Fans – Production lines – Automation A solid and reliable motor, ideal for operation in demanding industrial conditions.

Condition: new, The engine is new, unused, and comes from stock. In very good condition, ready for operation. Technical data Manufacturer: EMK Model: KAE2A132M 4B3E2K Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 400 / 690 V Frequency: 50 Hz Efficiency class: IE2 Protection rating: IP55 Gsdpeyv R Nnsfx Aa Ajbk Duty type: S1 Insulation class: F Design: IM B3 Weight: approximately 54 kg

Condition: new, For sale: brand new three-phase electric motor from renowned German manufacturer Motore Ehlert GmbH. The motor is factory new, kept in storage, never used. Visual and technical condition is perfect, ready for installation. Technical specifications: Manufacturer: Motore Ehlert GmbH Type: 1TZ9003 1AB53 4AB4 Z Gjdpsyv R Nhjfx Aa Ajbk Power: 3 kW Rotational speed: 1460 rpm Voltage: 400V 50Hz Current: 6.2 A Efficiency class: IE3 Protection rating: IP55 Insulation class: F Size: 100L Mounting: IM B3 Weight: approx. 27 kg Application: Designed for industrial use, ideal for pumps, fans, production machinery, and other industrial applications. Condition: New

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Godpfxeyv Inus Aa Asbk Mechanical size: 200L Mounting type: B3 Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Condition: used, Sold as defective, with warranty excluded. Control unit does not power on. Year of manufacture: 1980s Technical data: Travel X/Y/Z: 400 / 400 / 400 mm Tool holder: SK 40 Speed range: 40 - 4000 rpm Feed rate, infinitely variable: 2 - 360 mm/min Rapid traverse: 4000 mm/min Swivel table: 700 x 460 mm, max. load 350 kg Tool changer: Number of tools: 20 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Equipment: - Control unit: CNC path control Deckel Dialog 11 Godpjyfrf Iofx Aa Aebk - Hydromechanical clamping system SK 40 with pull studs DIN 69872 - Vertical and horizontal working spindle - Milling head manually swivels +/- 90° - Geometrically graduated direct transmission for maximum torque - Milling performance at the working spindle

Condition: ready for operation (used), functionality: fully functional, Specifications Gbedoytfbxjpfx Aa Ask Manufacturer: Deckel Model: SOE Condition: Used Stock number: 00662

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 Gbedpfx Aovvnfuoa Aek table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.