Used Knife Folder for sale (2,274)

Condition: ready for operation (used), Technical characteristics Width 880 mm Shaft Ø 350 mm with 2 blades Feed chain Type de recyclageShredder Power and Motors Power: 25 Kw Overall dimensions Bedjtx Hxvopfx Aaqelp

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 10.44524, JAGENBERG DIANA 90 folding and gluing machine Multi-point folding and gluing machine, richly equipped, HHS glue application system Year of manufacture: 1987 Serial number: 10.44524 HHS glue system: HHS glue system: 4 outlets, 4 nozzles. Number of glue points: 1-3 Bsdpfx Aaeubz E Toqslp Full technical documentation Machine connected, possibility of testing. Condition: very good

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing - 3-point gluing, crash lock, lock bottom - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition Bsdpfsw H Rc Nox Aaqelp

Condition: like new (used), functionality: fully functional, Wadkin Visage blade grinding machine, Machine in excellent condition, extremely little use, condition close to new Can be seen in operation at our premises Price includes loading of the equipment Bledpfjw Dqngox Aaqep Transport and installation possible at extra cost.

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Bledpfxoki Tqcs Aaqsp Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: ready for operation (used), IN STOCK Flat pile feeder with tremat suction 1st unit 6 buckle plates Optional- gate fold attachment SAK stream delivery Bljdpfxoir A Nce Aaqjp

Condition: excellent (used), Planer blade sharpening machine 650 mm sharpening width Bedpfxovf Hiko Aaqjlp

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Bljdpfeubztkex Aaqjp Year of manufacture: 2001 on plate EDIGRAPH S.A. Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: used, Jagenberg Diana 125 Folder Gluer 4-6 point operational Bedsw H Rbfjpfx Aaqslp

Condition: used, Year of construction: 1982, machine/vehicle number: 2643, Folder Gluer Jagenberg Simplex Universal 875Baujahr/ Year 1982 - Serial-No. 8128 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Material 160 - 600 g/m2, Vollpappe und Wellpappe bis 4mm Format max. 600mm x 875mm / 24" x 34" Format min. 70mmm x 55mm / 2.75" x 2.25" Maschinenabmessung BxL 1500mm x 6800mm / 59" x 268" Bodpfeibvi Usx Aaqolp Länge Pressband 2600mm / 102" Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), IN STOCK Bjdpeir A Iqefx Aaqelp stack lift 650 kg

Condition: excellent (used), Year of construction: 2016, The optional inspection systems are offered as special features of the KAMA FF 52i: 1. Glued seam inspection 2. Inspection of the gluing flap code such as colour code, QR code, etc. 3. 100% inspection for dirt and defects in text, colour, hot foil, and even cold embossing, as well as creases. The inspection systems are controlled by Baumer hhs; they are, of course, GMP-compliant, and non-conforming boxes are reliably ejected by the FF 52i. If desired, these features can also be implemented using other manufacturers’ systems. Inspection and removal processes are logged automatically. Bljdpfsw H N Eiex Aaqsp Examples of changeover times from a customer with very short production runs. Addressing Print 4.0 Like all KAMA machines, the FF 52i can be integrated into the customer’s IT network via a data terminal and/or connected to the internet to communicate with internal production departments, MIS software, and the KAMA service department for remote maintenance. All jobs can be saved either on a central server or locally on the machine. The machine is also prepared to receive and send data, such as electronic job tickets, track & trace information, etc., using the JDF Standard. The machine can be adapted to the following applications: - Straight-line boxes - Lock-bottom boxes - Pillow boxes - Automatic boxes (crash-lock) - Slip-lid boxes Modules of the basic machine: - Friction feeder with two main setting guides - Belt feeder with six suction belts - Alignment unit for left or right alignment - Pre-breaking unit for creasing lines R1 and R3 (gluing flap 180°; right 135°) - KAMA gluing disc unit with exchangeable glue disc - KAMA final fold section, fully automated with patented APA system (Automated Plough Adjustment), and ejector - Transfer station with kicker for counting products - Pressing section with three pressure zones - Delivery belt - Operation and control: - Touchscreen operation with pictograms and multiple languages - Movable operating panel for convenient operation and inching mode - Data management for repeat orders For remote maintenance, the machine requires a network cable and configuration of the unique and permanent static IP address, subnet mask, DNS-server IP addresses (primary and secondary), and standard gateway IP address. Technical data: - Dimensions (L x W x H): approx. 13 x 1.2 x 1.5 m - Production speed: 20–250 m/min (straight-line box), 20–100 m/min (automatic bottom box) - Max. blank width: 520 mm - Processable material: - Cardboard: 180–600 gsm - Folded box thickness: max. 5 mm - Corrugated microflute E, F, N: 0.4–1.8 mm - Dimensions of straight-line and automatic boxes

Year of construction: 2008, condition: used, Kombi-Falzmaschine - Combination Folder Heidelberg Stahlfolder KH82-4KTLL32 Seiten Seitenfalz - 32 pages cross Fold Year 2008 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler bildschirm / Digital Display Inklusive Kompressor / include Compressor Bjdpfxorp En Uo Aaqslp Inklusive Handbücher / Included ManualsAuslage / Delivery Heidelberg SAK-94 Year 2006 - Serial-No. 0-00421 Arbeitsbreite max. 940mm / Working width max. 940mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2014, straight-line, crash-lock, double-wall, 4-corner and 6-corner boxes Max. speed: up to 300 m/min; inching speed: 20 m/min Material thickness: up to 1200 g/m² for solid board and corrugated board types E, C, B, AB – 3 or 5-ply (max. ~8 mm before folding, ~20 mm after folding) Max. folded box thickness: ~20 mm Modular construction and drives Each section independently driven by a servomotor (“SmartServo system”) Motorized linear guides for carrier movement ensure precise transport and positioning Memory Job recall function enables rapid changeover between repeat jobs Machine sections – key functions: 1. Feeder Section – Friction feeder with adjustable vibrator, side gates, servo-driven, suction belts, touch panel, rear support for long blanks 2. Side Register Section – Aligns blank to one side for perfect parallel feeding; quick setup; servo-motor 3. Pre-folding Section (optional in AC/PC/SL models) – 180° pre-folder (flap), 135° pre-folder (third crease), crease openers 4. Crash Lock Bottom Section – Hooks and helixes for front flap folding, adjustable hook tension, B-lock setup, quick adjustment 5. Gluing Unit – One lower (left) and optional lower right glue tanks; optional upper cold glue system; easy to remove and clean 6. Folding & Closing Section – Servo-driven outer belts (up to 180°), three complete carriers (upper/lower), mini-box folder, service access 7. Trombone / Transfer Section – Independent drive, automatic belt tensioning, pneumatic squaring devices, box transfer system to press section 8. Press Section – Pneumatic/servo pressing, manual/auto modes, length ~6.5 m (effective ~4 m), pressure control, front squaring device 9. Back-folding Device (SL models only) – Electronic, non-synchronized system, two independent servomotors, easy setup for 4- and 6-corner boxes 10. Optional Scoring / Creasing Module – Servo-driven creasing section located before pre-folding, allows deeper creasing Technical Dimensions 1450 SL: Machine length: from ~22.4 m (PC/SL) Width: approx. 2.23 m; Height: approx. 1.5 m Net weight: 15 tons Motor power: 40–45 kW; air supply (6 bar), consumption approx. 30 m³/h, glue tank ~155 L 🤝 Megafold Advantages Material versatility: from thin solid board to thick corrugated and multi-wall board Wide range of box styles: straight-line, crash-lock, double-wall, 4-corner, 6-corner Modular and configurable design allows adaptation to specific production needs Advanced automation and precision: servo drives, job memory, operator radio controller, touchscreen HMI Easy service and cleaning thanks to modular components and convenient access points Bsdpfx Aasw H Nw Esqjlp

Condition: used, Year of construction: 1997, machine/vehicle number: 97989, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52.DFour-directional folding unit - Vierbruchfalzwerk Year 1997 - Serial-No. 97989/97-255056 Sheet Size min 120 x 100mm - max. 520 x 360mm Speed max. 160 m/min. Cycle Rate max. 30000cycle/hour Infeed high 515 - 915mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bodpjll A Tisfx Aaqolp Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video Bjdpfsh Ax Scex Aaqolp We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1959, machine/vehicle number: 4651, Dreiseitenschneider - Halbautomatisch - Three-Knife-Trimmer - Semi-automatic Wohlenberg A43/30WBaujahr / Year 1959 - Serial-No. 4651 Semi-Automatic Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bsdjh Ax Tdspfx Aaqslp

Condition: used, Year of construction: 2006, Kombi-Falzmaschine - Combination Folder Heidelberg-Stahlfolder KH78-4KTLL Year 2006 - Serial-No. 0-00256 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 780 x 1280mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SAK-94.H Bedpsp Symgjfx Aaqolp Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2001, machine/vehicle number: 703796, Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.DFour-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Bedercnruspfx Aaqelp Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knifeYear 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Bsdpfxergbzhe Aaqslp

Condition: used, Year of construction: 1999, Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Bljdpeun Nn Dsfx Aaqjp Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, machine/vehicle number: 1, Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Bedpfxeivbbzs Aaqslp Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometerAuf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1993, machine/vehicle number: 43930306, Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z6Year 1993 - Serial-No. 43930306-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Bedev D Rqvjpfx Aaqolp Produktivität / Productivity 25.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 48966, Dreischneider / Three Knife Trimmer Perfecta SDYEZ-0 Serial-No. 48966 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bodpfxetzc Iwe Aaqjlp Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1990, machine/vehicle number: 35381, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52Year 1990 - Serial-No. 35381-145531 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bljdpfxsh R D Sbj Aaqop Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test