Used Length Measuring Instruments for sale (36,319)

Condition: like new (used), TA Instruments Discovery HR-1 – Hybrid Rheometer with Temperature Chamber Technical description of the device Manufacturer: TA Instruments, USA Model: Discovery HR-1 Series: Discovery Hybrid Rheometer Device type: Rotational-oscillatory rheometer Temperature system: Two-wing heating chamber, possibly an ETC (Environmental Test Chamber) Technical characteristics The TA Instruments Discovery HR-1 is an advanced hybrid rheometer designed for the precise investigation of the rheological properties of liquids, semi-finished products, polymers, pastes, gels, and viscoelastic materials. The device enables measurements in controlled stress mode, controlled shear rate mode, and oscillatory testing. The rheometer's design utilizes a precise drive system, a torque measurement system, and a gap control system. Technical parameters – Discovery HR-1 The following values are approximate catalog parameters for the HR-1 model and require confirmation for a specific device version. Parameter | Value ----- | ----- Type of measurement | Rotational and oscillatory Minimum oscillatory torque | approx. 0.5 nNm Minimum rotational torque | approx. 10 nNm Maximum torque | 150 mNm Angular speed range | up to 300 rad/s Oscillatory frequency range | up to 100 Hz Codpfjx E Sm Hox Aktjri Angular displacement resolution | approx. 10 nrad Gap control | Automatic Control modes | Stress, shear rate, oscillation Computer control | TA Instruments TRIOS software Temperature control system The device shown in the pictures is equipped with a two-part heating system that opens to the sides. The chamber enables rheological measurements to be carried out under controlled temperature conditions. System characteristics: * Two-wing design of the heating chamber. * Electric heating system. * Temperature control of the sample. * Possibility of conducting temperature studies. * Thermally insulated chamber elements. * Connections for the temperature control system. If the use of an ETC chamber is confirmed, the typical temperature range may be approximately -160°C to +600°C, depending on the configuration, cooling system, and accessories used. This range is not confirmed for the offered unit. Available research methods Rotational studies: * Viscosity measurement as a function of shear rate. * Determination of flow curves. * Study of the yield point. * Analysis of the behavior of non-Newtonian materials. Oscillatory studies: * Measurement of the storage modulus G'. * Measurement of the loss modulus G''. * Analysis of the loss tangent tan δ. * Frequency tests. * Amplitude tests. * Analysis of structural transitions of materials. Time and temperature studies: * Creep and recovery tests. * Stress relaxation. * Thermal stability studies. * Analysis of changes in rheological properties as a function of temperature and time. Configuration of the offered device Based on the photographic documentation, the set includes: 1. TA Instruments Discovery HR1 rheometer 2. Two-wing temperature chamber. 3. Accessories visible in the pictures 4. PC and software The device is a professional measurement platform designed for advanced rheological analyses in industrial and scientific laboratories.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, type of input current: AC, input voltage: 230 V, overall weight: 723 kg, travel distance X-axis: 235 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 600 mm, input frequency: 50 Hz, workpiece length (max.): 600 mm, ZOLLER genius 3 threadCheck – CNC measuring and setting device for threading and cutting tools, year of manufacture 2016 The machine is in technically perfect condition and fully functional. THE STRENGTHS – WHAT DISTINGUISHES THE threadCheck FROM THE genius - One machine for all measuring tasks: The threadCheck can do everything the genius can, and with the appropriate adapter holders, it can also perform setting and measuring tasks like a venturion or smartCheck – instead of two or three devices, one is sufficient. - The threading specialist: The 6th CNC axis and the pivoting optics carrier (± 30°) align the optics with the helix angle. Thread drills, milling cutters, and thread forming tools are measured without distortion, contact-free, and with µm precision – the genius cannot do this. - Threading programs without programming: Flank diameter, pitch, flank angle, lead angle, back taper, taper; metric, UNC/UNF, Whitworth, trapezoidal, and round threads. - Grinding wheels and grinding wheel packs are detected and automatically measured via type selection (MP 410). - Fully automatic, operator-independent measurement with test protocol – reproducible, documented, and ensuring reliable handling of complaints. - Spindle ace: Run-out ≤ 0.002 mm, changeover accuracy 0.001 mm (according to the manufacturer). - Full enclosure protects against dirt and stray light – can be used directly in production instead of in the measuring room. TECHNICAL DATA - 6 CNC axes · Tool length Z max. 600 mm · Tool diameter D max. 310 mm · Y-axis ± 50 mm - Connection 1 kVA, 230 V, 50 Hz · Compressed air 6 bar ± 10 % · Weight approx. 723 kg · gray EQUIPMENT - Software update 2023 to Windows 10 with pilot 4.0 V1.19 - Optics carrier genius 4 1:1/HR70, through-light camera 1:1/HR70, top-light camera HR70 with LED lighting, CNC pivoting device Crodj Advh Hspfx Aktsi - HG spindle ace size I/AF/HLG with autofocus, hollow encoder for high-resolution C-axis - Operating unit cockpit-pilot with 23" touch display, keyboard, mouse · Control cabinet ventilation - Software threadCheck with photorealistic input dialog and protocol on monitor and printer - Measuring program package inspectionPremium (target/actual comparison, item statistics, cost analysis, TMS “Silver”) - MP 212 flank diameter · MP 370 thread former · MP 851 first full tooth · MP 410 grinding wheels/packs · Macro editor lasso - Collet set Ø 4–16 mm (10 pieces) · Extraction tool · Color laser printer SERVICE AROUND THE MACHINE On request, complete technical support from a single source – according to individual agreement: Software upgrade · Installation and commissioning · Operator training · Support during operation · Demonstration · Warranty according to agreement. PROCESSING Machine in transit, delivery from 16727 Velten near Berlin · FCA Velten including loading · 100% advance payment · Delivery date by arrangement · Inspection by appointment. Data sheet attached as a PDF. Technical data according to manufacturer’s documents and information from the previous owner (information provided, no agreement on characteristics within the meaning of §§ 434, 443 BGB). We will confirm individual values bindingly during the inspection. Errors and prior sale are reserved.

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL Credpettlfksfx Aktsi ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. Cedpozz Rc Asfx Aktsri TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: used, Technical details: length: 1430 mm width: 1230 mm total power requirement: - kW thickness of plates: 260 mm Weight approx.: 1,416 t MITUTOYO Precision Granite Measuring Table / Granite Surface Plate with Linear Guides Weight: approx. 1,416 kg Codpfj Agnmxjx Aktjri Design: Solid granite construction on a steel base frame *

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Crodpfxow D R Nqj Aktei Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: new, Year of construction: 2023, warranty duration: 5 months, Sale includes: 1 Refurbished Leica BLK3D 1 Cable + charger 1 Battery 1 Microfiber cloth LEICA BLK3D – Professional 3D Photogrammetric Distance Meter Selling a Leica BLK3D in perfect working condition – the leading photogrammetric measurement tool for professionals in the construction, surveying, and architecture industries. Description The BLK3D combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection functions for image-based measurements with professional accuracy. (VERTICAL 3D) The device is equipped with 2 stereo photo lenses, allowing for 3D measurement of all elements that appear in the photo. (STTL) Each photo taken provides a complete measurement record, including height, width, and depth. Processing is performed in real time directly within the device (edge computing), without the need for a network connection or cloud services. Key Features Integrated photogrammetry: instrument combining a camera, advanced algorithms, and instant processing. Combined with electronic distance measurement technology. Auto-targeting: visual recognition technology that allows you to select specific points for your measurements. Construction site documentation: measure inaccessible areas, create plans, estimate building installations, and document project progress. Collaboration: share measurements with your colleagues via the BLK3D software (mobile or desktop version), export to JPG, or create PDF reports. Automatic geolocalization: each image is time-stamped and associated with the exact GPS coordinates of the capture location (Kuker-Ranken). Csdo Ah E A Topfx Akteri BIM/CAD integration: export to DWG/DXF for use in your CAD software, compatible with Autodesk BIM 360 (Kuker-Ranken). Technical Specifications Dimensions 180.6 × 77.6 × 27.1 mm Weight 480 g Tripod thread 1/4" (standard photo) Cameras 2 × 10 MP, 80° angle, 4 mm focal length Screen 5" IPS touchscreen, 720×1280 px Processor Snapdragon 820E Quadcore 2.35 GHz RAM 4 GB Internal storage 64 GB (~5,000 stereo photos) OS Android 7.1.2 Accuracy (good conditions) ±1 mm Accuracy (poor conditions) ±2 mm Maximum range 250 m (good conditions) / 120 m (poor) Battery 3,880 mAh – battery life ~4 hours Connectivity Bluetooth 4.1, Wi-Fi 802.11 b/g/n, GPS+GLONASS Ideal for: Architects, surveyors, quantity surveyors, site managers, building inspectors, engineering firms – any professional who needs to quickly take measurements on site or during inspections. International shipping available at your expense. - Interested in this equipment? Contact me via private message for more details or to discuss your 3D digitization needs!

Condition: good (used), Length measuring system – SIP – Société Genevoise d’Instruments de Physique Type/Model: SIP 300 M Condition: Used Year of manufacture: 2001 Technical data: Design: Motorized length measuring bench Measuring range: 300 mm Measuring system: Original steel scale Measuring accuracy/uncertainty: 0.25 µm Motorized: Yes Codpfx Aksz Nv Dmjtori Accessories: - Various accessories as shown in the images Request item: Transportation costs will be provided in a separate quote.

Condition: used, Year of construction: 1991, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Cods Aa Nnxopfx Aktjri TECHNICAL DETAILS General Information Machine type: 3D coordinate measuring machine Condition: good Machine weight: approx. 1.6 t Measuring table Table length: 1,500 mm Table width: 1,000 mm Through-passage: 800 mm Measuring ranges Measuring range X: 1,400 mm Measuring range Y: 1,000 mm Measuring range Z: 800 mm Dimensions Space requirement: approx. 2.0 × 1.8 × 2.1 m EQUIPMENT Finely ground measuring plate made of gray cast iron with T-slots ZETT measuring and evaluation computer EPSON evaluation printer with temperature stabilization heater Device for television transmission of microscope images Cold light source with 2 flexible fiber optic light guides Sony Mavica video printer

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 150 mm height over floor: 890 mm weight of the machine approx.: 250 kg Cedpfxezb Ux Aj Aktsri space requirements of the machine approx.: 2,5 m x 2,2 m m WENZEL Precision Granite Surface Plate 1000 × 630 mm WENZEL granite surface plate 1000 × 630 mm with minor edge chips and signs of use (see photos). A WENZEL granite surface plate measuring 1000 × 630 mm (typically approx. 150 mm thick) is a high-precision inspection and measuring surface made from natural hard stone (granite). WENZEL Metrology is internationally recognized for manufacturing extremely stable, low-distortion granite surface plates used as stress-free reference surfaces in metrology laboratories, quality control departments, toolrooms, and precision manufacturing environments. *

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Crodpfxsz Slirj Aktoi

Condition: used, Hexagon Type: Hexagon Optiv Performance 442 Product description: The 3D multi-sensor coordinate measuring machine Optiv Performance 442 combines optical and tactile measurements in a single system. The system supports multi-sensor measurements with a vision sensor, tactile sensor, TTL laser (Through-The-Lens), and the innovative Chromatic White Light Sensor (cws). The base unit with a vision sensor can be expanded with all available sensors in a modular fashion. Application areas: • Suitable for use on level floors • Versatile geometric measurements and GD&T analyses with standard construction accuracy • Design principle: » Low-vibration granite construction with a fixed bridge and a movable table » Integrated substructure with optional vibration dampers • Guides: » Precise mechanical linear guides in all axes • Drives: » DC servomotors, power transmission via backlash-free recirculating ball screws in the center of gravity • Length measuring system: » Incremental length measuring system • Resolution: 0.1 pm Hexagon Optiv 442 multi-sensor measuring machine equipped with a camera, laser, and Renishaw probe system. • Measuring range per sensor: 410x410x200mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. load capacity: glass plate 30kg • Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) • Max. travel speed per axis: 200mm/s • Camera with 2-stage zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5% Power consumption 1000 VA Weight: approx. 1100 kg Condition: used Cjdpfx Ajzgr R Ejktori Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, Crodpfx Ao Ad Simsktoi guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0404546759, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 800 mm, total height: 2,100 mm, overall weight: 500 kg, input current: 5 A, input frequency: 50 Hz, workpiece length (max.): 1,000 mm, workpiece width (max.): 155 mm, Equipment: type plate available, Marposs – High-Precision Optical Measuring System for Crankshafts, Camshafts and Other Shafts Marposs is one of the renowned and well-established manufacturers of high-precision automatic measuring systems for a wide range of shaft types. These systems are suitable for use in both metrology laboratories and directly on production lines for quality control. Machine Description For sale is a Marposs optical high-precision measuring system designed for measuring cylindrical and eccentric workpieces, particularly crankshafts and camshafts with lengths of up to 1,000 mm. Condition and Operational Status The machine is fully functional. One crankshaft type has already been programmed, tested and calibrated. The system is therefore ready for measuring this specific workpiece type. Programming and Training Programming for additional workpieces is possible. Upon request, programming for new workpieces, measurement procedures and verification of measurement results can be carried out jointly at the seller’s or buyer’s premises. Crodpfx As Ad R Ibsktoi On-site training in the programming and operation of the measuring system can also be arranged. Applications - Crankshafts - Camshafts - Other cylindrical and eccentric shafts - Workpieces up to 1,000 mm in length Inspection and functional testing are possible by appointment. For further technical information or inquiries regarding programming for additional workpieces, please feel free to contact us.

Condition: used, Mahr Type: Helio-Pan II 700 Codpozd R U Dofx Aktjri Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone.

Condition: used, Technical details: x-axis: 1000 mm z-axis: 600 mm diameter: - mm measuring range Y-axis: 972 mm interface: RS-232 tool taper: - weight: 40 kg power consumption: 100 Watt Floor Space WxD: 1,2 x 0,8 m Mitutoyo Linear Height 600 Height Gauge with Wenzel Precision Granite Surface Plate (Optional) The granite surface plate is not included in the sale but can be purchased separately. For sale is a high-quality Mitutoyo Linear Height 600 digital height gauge, designed for accurate 2D measurement tasks in quality control, toolmaking, manufacturing and inspection departments. Mitutoyo Linear Height 600 ·Precision digital height measuring instrument ·Measuring range: 600 mm ·RS232 data output ·Made in Japan ·High accuracy and repeatability ·Ideal for quality assurance and manufacturing environments Measurement Capabilities ·Height measurements ·Internal and external dimensions ·Hole center distances ·Center point determination ·Step measurements ·Diameter measurements ·2D measurement applications ·Angle measurements (with optional accessories) Optional: Wenzel Precision Granite Surface Plate ·Size: 1000 × 630 mm ·Manufacturer: Wenzel Precision ·Inspection date: 07.11.1989 ·Permissible flatness deviation: 0.008 mm ·Measured flatness deviation: 0.005 mm ·Weight: approx. 280 kg An excellent solution for toolrooms, quality control laboratories, precision engineering and manufacturing facilities. Codpfozbqypsx Aktsri *

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Crodpfezii Dnex Aktsi Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 40 mm height over floor: 680 mm weight of the machine approx.: ca.250 kg space requirements of the machine approx.: L:1,0xB:0,63xH:0,68 m Measurement and Controlling Plate material made of special cast with steel supplement surface scraped & surface-gauged 3 single column made of cast iron with steel ball inserts and adjustment thread Codpfx Akou Nki Tstsri *

Condition: new, EPS LINEAR – Automatic length stop system for fast and accurate operation The EPS LINEAR automatic length stop system makes it easy to quickly and accurately position materials to the desired length. The system is suitable for mounting on both new and existing machining equipment and is widely used in the wood, plastics, aluminum, and light steel industries. Simple operation, flexible application Use the clear touchscreen to enter the desired dimension, in millimeters or tenths of a millimeter. The current and set positions are clearly visible thanks to the large indicators and the clear screen layout. EPS LINEAR can be placed on either the left or right side of the machining equipment. The system is available from 1 meter and can be extended up to 14 meters. For working with short pieces, a simple attachment can be easily installed and removed. Technical specifications - Positioning speed: up to 40 meters per minute. - Holding force: 1,800 N. - Accuracy: ± 0.10 mm. - Supply voltage: 230 V, with 24 V control voltage. - Operation: start, stop, reference, measuring probe on/off, and access to parameter settings. Crjdpjtd Tndjfx Aktji - Position display: current and desired position. - Emergency stop: for immediately stopping the system. - Touchscreen: large indicators and a clear key layout. - Attachment for short pieces: easy to install and remove. - Software: fully developed and owned in-house, with continuous updates. - Components: industrial, maintenance-free components. - Cabling: including cable track, available up to a maximum of 14 meters. Want to know more about EPS LINEAR for your machine? Contact TM-Tools B.V. We will be happy to advise you on the options for your application. This advertisement has been prepared with the utmost care. Typographical errors and inaccuracies in the specifications are subject to change.

Condition: excellent (used), I am offering for sale a professional LeCroy WaveJet 354A digital oscilloscope, designed for laboratory, service, and industrial applications. This is a high-quality measuring instrument with a bandwidth of 500 MHz and a sampling rate of 2 GS/s. Technical specifications: Crsdez Snrbspfx Aktji • Manufacturer: LeCroy • Model: WaveJet 354A • Bandwidth: 500 MHz • Sampling rate: 2 GS/s • 4 analog channels • USB port • Built-in carrying handle • Power supply: 90–264 V AC, 47–63 Hz Condition: • Used, in good visual condition with normal signs of use. • The device powers on and functions correctly – the display is working, as can be seen in the photos.

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, feed length Z-axis: 30 mm, travel distance Z-axis: 350 mm, Equipment: type plate available, -Leasing options are available!!!- ConturoMatic CV120 contour measuring device – “simply measure contours” -Sample parts can be sent in for free measurement; online demo available after consultation. Also, ask about our leasing options; we will gladly connect you with our partner. ✅ Up to 30% declining depreciation on movable assets* ✅ Valid for investments starting in July 2025* ✅ T&S products are fully eligible for funding* Cedpoq Nzd Nsfx Aktori Contour measuring system with feed unit and motorized Z-axis Scope of delivery: - CV120 motorized feed unit with precision guide - External control and regulation unit - Motorized Z-axis - Evaluation computer, desktop version W11/64 bit - 24" TFT monitor - ConturoMatic evaluation software; operating manual - Cable set - CM software updates FREE!!! Technical data CV120: Feed unit (X/Z measuring axis) - Z-axis measuring range: 30 mm - X-axis measuring range: 120 mm - Measuring speed: 0.1-1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe tip lifting function Z-axis - Positioning range: 320 mm, motorized Accuracy: X-axis +/- (1.2 µm + 2Lx/25) µm* [L = mm] Z-axis +/- (1.8 µm + 2Lz/25) µm* [L = mm] Note: Various accessories are available as options to adapt our CV120 to the required measuring tasks and for system expansion, such as different probe arms, universal clamping devices, or customer-specific part holders. Probe arms with tip lengths from 2.5 to 59.5 mm available... * according to specification T&S/CV120 -Subject to technical changes- Commodity code: 90318020 -2 year warranty- Photos contain special accessories that are not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide any legal or tax advice on this matter, and the above-mentioned information must not be interpreted as advice. If in doubt, please contact your relevant contact persons (specialist department or tax advisor).

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Crodpfx Ajixqg Noktei Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: new, IDEAL 1080 Krug & Priester Lever-Action Paper Cutter   Ideal 1038 paper cutter   - Tool steel blade with a sharpening angle of 75° - Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials - Re-sharpenable blade set made of Solingen knife steel - Complete with a sturdy base frame and foot pedal - Fold-out side table, right - Side guide with a measuring scale in mm and inches - Infinitely adjustable back guide with a locking screw - Front guide with a locking screw and narrow-cut device - Scale knob for precise adjustment of the front guide - Printed DIN format scale from A3 to A6 - Fixed, transparent blade guard made of shatterproof plastic and blade locking device - Particularly stable blade bearing made of aluminum casting and double-bearing blade shaft for precise cuts - Extremely robust metal construction - GS tested safety mark - Brand quality, Made in Germany - Cutting length: 800 mm - Cutting capacity: approx. 20 sheets (paper 70 g/m²) - 4 mm passage height - Table size (W x D): 605 x 800 mm - Dimensions (H x W x D): 1215 x 670 x 1080 mm Crodpjx R Scxefx Aktsi - Width with fold-out side table: 890 mm - Weight: 55 kg   Item condition: new ideal 1038 paper cutter   You can find more paper cutters in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), HARTGESTEIN measuring and control plate DIN 876/1 with substructure Dimensions: Length: 800 mm Width: 600 mm Thickness: 120 mm Crjdpfxjzati Re Aktsi Height with substructure: 890 mm Accuracy: DIN 876/1

Condition: excellent (used), For sale is a robust measuring instrument from the renowned German company AbaWerk Aschaffenburg. It features a cast iron base and is equipped with two hardened centering pins for securing shafts and cylindrical parts. Ideal for use with tool microscopes, measuring projectors, and in quality control. Technical data: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Pin spacing: approx. 115 mm • Stable, heavy cast iron base – secure mounting • Possibility of rotating the part between the pins • Condition: used, fully functional The instrument is manufactured to industrial standards – its precision and durability make such items highly sought after in metrology and toolmaking. Crodpfez Sldpox Aktoi