Used Length Meter for sale (31,557)

Condition: good (used), clear span: 1,800 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 9,540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,540 mm Number of bays per row of shelves: 05 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 100 pcs. Total pallet spaces: 100 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 06x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation Bdedpfx Agstyyr Ssdsf results in a reduced shelf load per pair of pair of beams of 1,250 kg 45x fitted shelving, second-hand Design: with notches Material color: hot-dip galvanized Total depth: approx. 1,060 mm (bearing bar direction) for upright depth: approx. 1,050 mm Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (crossbar direction) Support bar spacing: 28|1.50 mm Crossbar support: approx. 58 mm Frame height: approx. 44 mm Mesh width: approx. 33 x 33 mm Weight per unit: approx. 33.310 kg Internal designation: GR-76 180x locking pin, used Material color: sendzimir galvanized For securing the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, clear span: 1,800 mm, total width: 1,050 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 11,430 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,430 mm Number of bays per row of shelves: 06 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 120 pcs. Total pallet spaces: 120 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 07x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 108x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg Bdedpfotznl Iex Agdef 216x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), functionality: fully functional, Buffer belt, stainless steel dryer 3-piece buffer belt Belt width: 1500 mm Stainless steel Length: approx. 17.5 meters Width: 2500 mm Bjdpfxowb Sqwj Agdedf Height: 3050 mm Weight according to specification: approx. 8000 KG Elements under the belt are not included

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2013, loading space length: 10,990 mm, loading space height: 1,530 mm, color: other, Year of construction: 2013, Equipment: crane, 700005226 = More information = Rear axle 1: Lift axle; Steering Rear axle 2: Steering Rear axle 3: Steering Crane: PALFINGER 40001EL, year of manufacture 2013, on rear of chassis Technical condition: very good Visual appearance: very good Bedpfx Asymrvisgdedf Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), Year of construction: 2020, total length: 6,020 mm, Pneumatic automatic press for longitudinal wood gluing, 6 meters, for micro-joints, after complete overhaul Bjdpey E I D Ijfx Agdjdf

Condition: used, Używana suszarnia rurowa do pracy ciągłej z sekcją chłodzącą produkcji COMESSA wykonana ze stali kwasoodpornej AISI 304. Komora o wymiarach: Ø 2400 x długość 14000 mm. Długość części suszącej: 7000 mm. Długość części chłodzącej: 7000 mm. Poprzednie zastosowanie: suszenie białego cukru z wydajnością do 30 T/h. Ślimak ze stali ko napędzany silnikiem el. o mocy 7,5 kW. Wentylator nadmuchowy wykonany ze stali ko, napędzany silnikiem elektrycznym o mocy 7,5 kW. Wentylator chłodzący wykonany ze stali ko, napędzany silnikiem el. o mocy 11 kW. Elementy instalacji do podgrzewania wstępnego, suszenia i chłodzenia wykonane ze stali kwasoodpornej. W zestawie dokumentacja producenta. Bdsdpfx Ageyhc N Nsdjf Suszarnia dostarczana jest bez: Silnika elektrycznego do napędu suszarni o mocy 45 kW. Wentylatora wyciągowego napędzanego silnikiem elektrycznym o mocy 55 kW. Nagrzewnicy parowej. Pełny opis oryginalnej instalacji na zapytanie. Weight: 21500kg Dimensions: diameter 3.35m x lenght 14m

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE Bjdpsthg Diefx Agdjdf ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection Bdjdjxl Dbtopfx Agdof • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Bdsdpfx Agoy Rnb Djdjf

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! Bdedefyn Rpjpfx Agdof I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Bdedpfxjq Ulh He Agdef Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. Bdodpsttlfkefx Agdof LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls Bsdpfx Agsihf Tpjdodf 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Bdodpfxeixqg Ns Agdsf Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: new, functionality: fully functional, Endress + Hauser Proline T-Mass 651-30AB1AD1AAABCA Thermal Mass Flow Meter Bdsdoznw Hzspfx Agdef 6 pieces available Brand new, unused, ex stores stock. Sold as seen.

Condition: used, mileage: 113,111 km, power: 118 kW (160.44 HP), first registration: 11/2015, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2015, Equipment: ABS, electric window regulation, power assisted steering, = Additional options and accessories = - Beacon(s) - Disc brakes - Immobilizer - Radio CD player - Speed limiter = Remarks = Superstructure Construction year: 2008 Mercedes Sprinter 516, 2015, 113000 km, Euro 6, Manual transmission, Versalift ET-30 NE XS Bdedpfx Aszgubyegdof = More information = GVW: 5.300 kg Make of bodywork: Versalift ET-30 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, This listing is for Mettler Toledo Seven Excellence Multiparameter Meter The unit is in full working condition and ready for immediate use This multiparameter meter is a high-quality lab instrument manufactured by Mettler Toledo (Model: Seven Excellence). A modular and highly precise instrument capable of measuring pH, conductivity, and other crucial electrochemistry parameters. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Bdedezqf Ixspfx Agdsf By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Jenway 3520 bench‑mounted laboratory pH/mV/temperature meter The unit is in full working condition and is ready for immediate use The Jenway 3520 is a bench‑mounted laboratory pH/mV/temperature meter designed for precise measurement and recording of hydrogen ion concentration (pH), redox potential (mV), and solution temperature in scientific, QC (quality control) and GLP environments. Key Features Measurement Capabilities - Measures pH, mV (redox potential) and temperature simultaneously. - High resolution: up to three decimal places (0.001 pH) for detailed accuracy. - Wide pH range: typically –2.000 to +20.000 pH units. - Temperature range from approximately –10 °C to +105 °C. Calibration & Buffer Recognition Bsdpfxeyk Evqs Agdedf - Supports 1, 2, or 3‑point pH calibration for flexible accuracy. - Automatic or manual buffer selection, compatible with DIN, JIS and NIST standards. Data & Logging - Built‑in data logger can store up to 500 readings, with options for printing or exporting via interfaces. - GLP support includes calibration reminders, security‑protected user data, and multiple alarm options. Display & Interface - Backlit LCD display shows readings clearly. - Communication via analogue output, RS‑232 serial port and optional IrDA (infra‑red) printer interface. Additional Functions - Multi‑language menu options. - Alarm outputs (audible and open‑collector) for set thresholds. - Option to wall‑mount or bench‑top install. ----- Typical What’s Included Depending on the specific kit or version you buy, the meter often comes with: - Glass combination pH electrode - Automatic Temperature Compensation (ATC) probe - Buffer sachets (pH 4, 7, 10) - Electrode stand and holder - Power supply (230 VAC / UK or 120 VAC versions available) ----- Typical Applications The 3520 is suited to: - Routine pH analysis in research and industrial labs - Quality control and regulatory compliance testing - Monitoring & logging in process environments - Scenarios where traceable, high‑precision data is needed ----- If you want detailed user‑manual specifications (e.g., calibration procedure, wiring diagrams), I can help find or summarize that too!

Condition: used, mileage: 29,900 km, power: 100 kW (135.96 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free kit, bodybuilder interface with extension module and CAN data bus, vehicle key with remote control, electric parking brake, steering column (steering wheel) height and reach adjustable, PTO (power take-off) 180 Nm, smoker package, cab seats: single passenger seat, cab seats: comfort driver seat (hydraulic) Additional Equipment: Driver’s airbag, trailer stability program (TSM), trailer socket pre-installation, traction control (ASR), comfort dashboard in blue, model: S-series, exterior mirrors electrically adjustable and heated, brake assist, electronic brake force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: reinforced parabolic, front axle suspension: transverse leaf spring, tinted windshield and side windows, alternator 210 A, speed limiter system: 160 km/h, urea (AdBlue) tank: 20 L, body/chassis: flatbed, fuel tank: 70 L, blue radiator grille, engine: 2.3 L – 100 kW diesel, wheelbase: 3450 mm, low-emission according to Euro 6d standard, service interval display, permissible total weight: 3.50 t Versalift LT-30-110-TB 11.2 meters 2 persons 200 kg Bdedozlp E Depfx Agdjf The vehicle is in very good condition! Financing available through Santander Bank.

Condition: used, mileage: 149,000 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,160 mm, loading space height: 1,990 mm, Equipment: central locking, soot filter, * Power steering * Partition wall * Central locking Park assist: Camera * electric windows * 2 seats * rear flap * radio Cargo space internal dimensions: L 4.20 W 2.16 H 1.99 meters Payload: 1030 kg Bodpfx Ajzlpxwsgdodf The vehicle is in good condition! No TÜV

Condition: used, functionality: fully functional, machine/vehicle number: FN 62xxxx, Year of construction: 2020, operating hours: 4,510 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 1,405 mm, fuel type: electric, mast type: duplex, construction height: 1,970 mm, fork length: 1,100 mm, empty load weight: 2,918 kg, total length: 1,785 mm, drive type: Elektro, construction width: 990 mm, Electric 3-wheel forklift Chassis number: FN 62xxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Non-marking Front tire size: SE 18x7-8, non-marking Rear tire type: Non-marking Rear tire size: SE 18x7-8, non-marking Battery voltage: 24V Battery Ah: 920Ah Battery manufacturer: Hoppecke Battery type: PzS Battery year of manufacture: 2020 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, no warranty/liability for defects Side shifter, attached with couplings 3rd valve, work light rear, work light front, impulse control, full free lift, rear spotlight, tail lights and turn signals, flashing beacon, Solo-Pilot (single lever), 2 panoramic mirrors, non-marking tires, under 2 meters in height (special construction), battery (04/2020) with Aquamatik, external charger included. Bdjdpfozq Ia Dex Agdof

Condition: good (used), Year of construction: 1980, You are bidding on a branded machine from the well-known German manufacturer Griebel. Features of the machine: Electric feed, cutting, and straightening machine Cuts up to 2mm steel – significantly more for aluminum (see nameplate) Usable length: slightly over 1.5m Sheet metal thickness (iron): 2mm Straightens the sheet metal using an adjustable multi-roller system Length and quantity are pre-set Weight: approximately 2 tons We also have other machines and tools available. You will receive an invoice in accordance with §25a UStG (German VAT law). The invoice amount includes VAT. I can arrange transportation services if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible after arranging an appointment by phone. Bsdpfozcxa Hjx Agdedf Payment in cash upon collection. If I can assist you with anything else, please call me. Thank you. Collection should take place within 8 days after the end of the auction.

Condition: good (used), # 7.5 Meter Container Platform – Used A used container platform in good condition is for sale. ### Technical Specifications * Length: 7.5 meters * Width: 1.05 meters (standard) * Brand: unknown * Condition: used * Location: Herentals (Belgium) The container platform is suitable for various container and transport applications. Ideal as a replacement or for a new construction project. Available immediately. Price: €950 net. Inspection possible by appointment. Please contact us for further information or additional photos. Bdodpfszquxyex Agdsf --- ## About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected in our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman BV Lenskensdijk 5 2200 Herentals Belgium ☎ = Further Information = Technical condition: good Optical condition: good Damage: none Please contact Joeri Celen or August Celen for further information.

Condition: used, mileage: 93,300 km, power: 101 kW (137.32 HP), first registration: 09/2010, fuel type: diesel, empty load weight: 5,130 kg, maximum load weight: 2,360 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,200 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space volume: 3 m³, loading space length: 3,700 mm, loading space width: 2,170 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Nissan Atleon 80.14 flatbed truck with crane First registered: 9/2010 Only 93,300 km, with documentation Euro 4 emission class Short cab Manual transmission Air conditioning Tires 205/75 R17.5, tread depth approx. 60% Vehicle length 6420mm Flatbed dimensions: 3700mm x 2170mm Side boards 400mm Wheelbase 3200mm Permissible total weight: 7,490 kg Unladen weight 5,130 kg Crane Ferrari F561 A4 Year of manufacture 2009 Floor-mounted controls, left and right 5 extensions, 4 hydraulic and 1 mechanical 2.50m / 2340 kg 4.15m / 1420 kg 5.70m / 980 kg 7.30m / 730 kg 8.83m / 580 kg 10.40m / 485 kg 12.00m / 395 kg (mechanical extension) Hook height approx. 14.80 meters German vehicle in good condition. Export/net price: 25,900 Euros Bodpfxjygndvj Agdjdf All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 93,300 km, power: 101 kW (137.32 HP), first registration: 09/2010, fuel type: diesel, empty load weight: 5,130 kg, maximum load weight: 2,360 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,200 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space volume: 3 m³, loading space length: 3,700 mm, loading space width: 2,170 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Nissan Atleon 80.14 flatbed truck with crane First registration: 9/2010 Only 93,300 km, with supporting documentation Euro 4 emission class Bjdpfoygnd Asx Agdsdf Short cab Manual transmission Air conditioning Tires 205/75 R17.5, tread depth approx. 60% Vehicle length 6420 mm Flatbed 3700 mm x 2170 mm Sideboards 400 mm Wheelbase 3200 mm Permissible total weight: 7,490 kg Unladen weight 5,130 kg Crane Ferrari F561 A4 Year of manufacture 2009 Floor control on the left and right 5 outriggers, 4 hydraulic and 1 mechanical 2.50 m / 2340 kg 4.15 m / 1420 kg 5.70 m / 980 kg 7.30 m / 730 kg 8.83 m / 580 kg 10.40 m / 485 kg 12.00 m / 395 kg (mechanical outrigger) Hook height approx. 14.80 meters German vehicle in well-maintained condition. Export/net price: 25,900 Euros All information without guarantee, errors and omissions excepted.