Used Lever Plate Shear for sale (14,510)

Condition: used, Year of construction: 1969, Technical details: Gbodpfxou Icp Ae Al Usu sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 Gbedpfx Aloy I Dbbs Ueu oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: good (used), sheet thickness steel (max.): 16 mm, overall weight: 16,500 kg, cutting length (max.): 3,000 mm, Used high quality Pearson hydraulic 3metre x 16mm guillotine for sale 3metre x 16mm Gbjdpsva Hq Rjfx Al Usu Blade adjustment Front operated powered back gauge

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears Godpfsyanqvjx Al Usbu -Manufacturer: Maschinenfabrik Bock, hydraulic plate shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU Gsdpfx Aexabd Ujl Ujbu number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek work height max. 840 mm down holder 14 Stück Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) Gbodpfx Asxab Ruel Uou - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop - 3x front support arms Gedpszzrflsfx Al Usbu - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Gedpfx Asv Tk Exjl Usbu Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms Gedpfxspxmxcj Al Uebu - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm Gbodsifu Anopfx Al Uou - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. Gedpfx Alez N Hxno Uebu engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) Gjdpfx Aex Ni D Rel Uobu * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° Gbjdst Tqnvjpfx Al Ueu total power requirement 12 kW weight of the machine ca. 14,7 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: good (used), Cutting length: 3100 mm Gsdetwl Awspfx Al Uobu Cutting capacity : 6 mm steel Digital back gauge Cutting gap and cutting angle adjustment from the front 1 set of spare blades

Year of construction: 2000, condition: ready for operation (used), Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible. Godpfxezka Ige Al Uobu

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° Gbedezkvx Ijpfx Al Ueu adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear Gjdpjznngxsfx Al Uobu - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment Gbjdpfxjzvq Etj Al Uju - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: new, Year of construction: 2026, ABKANTBANK-Technik Halver, YOUR competent partner for SHEARS AND BENDING MACHINES We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 2000/1.2mm - Working length 2050mm Gedpfsv Nwx Rsx Al Uobu - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Clearance: 8cm Shipping within Germany 360€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min Gedpotv Ihqsfx Al Usbu cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m with electr. back stop, 950 mm

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 Gsdezycpxopfx Al Usbu oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm Gedpfx Aovc Amtol Uebu 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Gbodohtq N Nopfx Al Usu Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Gbodsu Icnfopfx Al Uou Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm Godpfx Ajhhc Ixol Uebu - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch