Used Lifepak 300 for sale (13,020)

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing Ljdpfx Alozrvccozjhl – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary Lhsdpfx Asy A Ewtelzsl 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: excellent (used), functionality: fully functional, mileage: 34,000 km, power: 219.91 kW (298.99 HP), first registration: 10/2010, fuel type: diesel, overall weight: 14,500 kg, tire condition: 95 %, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2026, fuel: diesel, color: red, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 9, total length: 7,750 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, additional headlights, airbag, differential lock, fog lights, parking heater, trailer coupling, truck registration, Iveco 160 E HLF 20, superstructure by MAGIRUS AF 3 Road-going 4x2 drive Crew cab for 1 + 8 personnel Rear axle differential lock 2000 l water tank and 150 l foam tank Pump, 2000 l/min, manufactured by MAGIRUS Pneumatic lighting mast at the rear of the superstructure Area lighting Camera system Storage for electrical equipment/lighting PA system storage/backrests in the cab Special paint job, red/yellow Extendable hygiene board Martin fanfare system Front strobe lights Auxiliary heater Electric exterior mirrors Roof storage for extension ladder and 3-part sliding ladder Tool deployment panel Rear warning system Tire chains for rear axle Euro 5 engine One-person hose reel system Ledpfxozx D Nws Alzshl L/W/H: 8200x2500x3100 mm New inspections (MOT/emission test/safety inspection) available upon request for an additional charge Price available upon written request Sale without any included equipment -Sale only to authorities and businesses- (no sale to private individuals) Sold as a used vehicle without warranty.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lsdpfx Aloz Ar Agozehl Lot 2 of Auction 3505

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components Lhodpfx Aezpvumelzsl D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment Lhjdpfx Alezncrpezel For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE Lhedpfxjz D Ad Io Alzsl 460 kg Year: 2009

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM Lodpfx Aljy Twg Uszehl MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR Lodpfxozw Dvbj Alzjhl (In case of greater exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Lhodpfxjz At Abj Alzsl Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 Ljdpfez A Tbujx Alzohl MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Year of construction: 2020, condition: used, Bag filling and sealing machine, Rianta PS Mako BFS 300 Year of manufacture: 2020 Condition: cleaned & inspected Suitable for 2-wire paper or plastic clip band, 8 mm wide, wire diameter 0.6-0.8 mm Output: 35 packages/min (product-dependent) Max. product dimensions (L x W x H): 450 x 230 x 140 mm Air blower for opening the bags Date printer Lhedpfx Aljz A Sf Sjzol Includes inclined conveyor belt, type: SF 1500

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 300 mm, passage height: 340 mm, Three-sided brush sanding machine / brush machine Manufacturer: Houfek Type: Twingo 300 Year of manufacture: 2013 Ledpfjzg S Nzex Alzshl Working width: 300 mm Passage height: approx. 340 mm 1x sanding brush unit, vertical, from the left, speed infinitely adjustable 1x sanding brush unit, vertical, from the right, speed infinitely adjustable 2x sanding brush units, horizontal, from above, speed infinitely adjustable Feed rate infinitely adjustable Machine weight: approx. 690 kg Includes various sanding and structuring brushes on a separate pallet.

Condition: used, Year of construction: 2021, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,089 m³/h, intake vacuum (max.): 2,760 mbar, intake manifold diameter: 300 mm, filter area: 32 m², noise level: 74 dB, actuation type: electric, total height: 2,570 mm, total length: 3,650 mm, total width: 1,540 mm, overall weight: 967 kg, Equipment: CE marking, documentation/manual, We are offering this used Schuko Vacomat 300 XP mobile dust extraction system, manufactured in 2021. Year of manufacture: 12/2021 Manufacturer's number: 8122725 Lodpfx Aez Ayxijlzohl Machine number: 30721411 Motor power consumption: 7.5 kW Motor current: 15.0 A Motor voltage: 400 V Motor frequency: 50 Hz Motor speed: 2890 1/min Filter area: 32 m² Diameter: 300 mm Dimensions L × W × H: 3650 × 1540 × 2570 mm Weight: 967 kg Filter material: BGIA (AWN16) Sound pressure level: 74 dB(A) Negative pressure: 2760 Pa Nominal volumetric flow: 5089 m³/h If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Ljdezxxmkjpfx Alzohl Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm Control Siemens 840 D sl internal diameter 100-300 mm weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,30 x 3,80 m GLEASON-PFAUTER 300 PS Gear Skiving Machine – Year 2018 For sale is a high-performance CNC gear skiving machine type GLEASON-PFAUTER 300 PS, built in 2018. The machine is ideally suited for the precise machining of internal gears and offers excellent dynamics, advanced CNC technology, and a robust machine design. Equipped with a powerful Siemens 840D sl CNC control, this machine provides optimal conditions for efficient and repeatable gear manufacturing processes. Technical Specifications - Max. gear diameter: 450 mm - Max. module: 4 mm - Internal diameter range: 100 – 300 mm - Max. allowable skiving cutter diameter: 175 mm - Mounting surface diameter: 125 mm - Axis Travels: X-axis travel: 350 mm Y-axis travel: 300 mm Z-axis travel: 440 mm - Max. skiving head swivel angle: ±25° - Workpiece table outer diameter: 570 mm - Max. table load capacity: 5 kN - Feed Rates and Speeds X-axis feed rate: 12,000 mm/min Y-axis feed rate: 5,000 mm/min Z-axis feed rate: 8,570 mm/min - Tool speed: 0 – 3,000 rpm - Workpiece table speed: 0 – 1,500 rpm Additional Equipment / Information - CNC Siemens 840D sl - Swivel gripper slide travel: 180° - Operating voltage: 400 V - Machine weight: approx. 11 t - Space requirement: approx. 5.85 × 8.3 × 3.8 m - Hydraulic oil capacity: 150 l - Coolant capacity: 850 l - Motor and hydraulic cooling: 100 l Lhjdpfx Alszupl Njzsl The machine is in very good condition and is ideally suited for demanding series production and high-precision gear manufacturing applications. Inspection by appointment possible.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, overall weight: 4,500 kg, GF AgieCharmilles FORM 300 Year of manufacture: 2017 Travel ranges (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ISPG generator with 80 amps Best surface roughness: Ra 0.08 µm AC FORM HMI operating interface 15" LCD color screen, mouse, touchscreen The FORM 300 is connected to a Workpartner WPT1+ from 3R-Systems. This ensures simple and flexible automation for electrode and pallet changes. Minimum 90 electrode positions Minimum 4 pallet positions The FORM 300 will be cleaned, overhauled, and thoroughly tested according to your order to ensure the highest quality and reliability. We would also be pleased to offer you the following: - Transport - Commissioning and training - Clamping devices Lhjdpfx Aloz Aq Hwozel - Dielectric fluid - Cooling unit

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Lhsdpfx Alsztplgezjl Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Lhedoz D Uuxjpfx Alzsl Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, semi-automatic band saw Lhedpfx Alezly Aaozsl

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Lhedjzur Efspfx Alzjl Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, Ljdpfxsz D A Rbe Alzohl each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Control / Software IMAWOP 5.0

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 0-279-09-0107, Equipment: documentation/manual, lighting, We offer a complete FRIZ Kaschiertechnik ProfiLine FLW 300 / FKL 300 laminating line. This system is designed for applying adhesive and subsequently laminating sheet materials with foils or other surface materials. Technical documentation and further information are available upon request. Ledpezxq Umsfx Alzjhl

Condition: used, Year of construction: 2000, 1 collating machine, manufacturer: Heidelberg, model: Stitchmaster 300 UFA, year of manufacture: 2000, for more information, please see the pictures. Lsdoz Dg Eiopfx Alzohl Note: If interested, an inspection appointment can be arranged.

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Spindle diameter: 30 mm Lhjdpfx Alezz N Nnjzsl Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016