Used Linear Guide Car for sale (14,142)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Cjdpfxsuzn Nnj Aarjrf Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Cjdpfx Aozd Tcwjarjrf Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor Parts catcher CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Cedpfx Aaeyv Dnksrorf Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: used, Length: 12,000 mm. Codpezilxbjfx Aarorf

Condition: used, Year of construction: 2015, overall weight: 300 kg, load capacity: 5 kg, terms of delivery: FCA Pegnitz Crsdpfezrh Nzex Aarjf delivery time: on request terms of payment: 100% prior to delivery

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Crodpfx Aaoxyi Rveref Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: refurbished (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Number of axis: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm Cedpjwnfmfsfx Aarjrf \+ C axis pneumatic Reach: 4000 mm Payload: 41 kg Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, SEPRO SUCCESS 7 (2013) linear robot 1000mm, 3kg Crodpfx Aox Edm Nsarjf Number of axis: 3 Reach: 1000 mm Payload: 3 kg

Condition: good (used), Year of construction: 2011, Number of axis: 3 Credpfx Aoyfhxkearjf Reach: 1500 mm Payload: 5 kg X= 390mm Y=1000mm Z=1500mm C= 0-90 pneumatic

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available Crsdpfx Aey Uffhearef The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: good (used), Year of construction: 2014, Engel VIPER 20 linear robot Csdpfxowrzg Aj Aarjrf \+ console

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 2,800 mm, overall weight: 450 kg, Equipment: documentation/manual, Arburg MULTILIFT SELECT 15 (2011) linear robot Number of axis: 3 Reach: 2800 mm Payload: 15 kg X-900 mm Y-1400 mm Z-2800 mm Cedpfx Aasxn Rg Ujrorf C- 90

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Number of axis: 3 Codpox Urvtofx Aarorf Reach: 1300 mm Payload: 4 kg X = 300mm Y= 1000mm Z=1300mm

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Wittmann W828 Z=2500 mm linear robot , payload 5kg Euromap 67 X= 1105 mm Y= 1200 mm Z= 2500 mm C is added in this price Gimatic brand Vacuum : 2 Number of axis: 3 Cjdsy Nkf Aspfx Aarerf Reach: 2500 mm Payload: 5 kg

Condition: used, Robot was on Arburg 150 + 220 ton Crodexy Nywspfx Aarsf

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. Credpfxeyfv Rbs Aarof - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0.

Condition: good (used), Year of construction: 2006, functionality: fully functional, x-travel 2500 mm y-travel 920 mm z-travel 820 mm Control Heidenhain iTNC 530 table surface area 3100 x 900 mm table load 3,0 t tool taper HSK-A63 spindle turning speed range20 - 18000 rpm rapid traverse (X,Y,Z) 100 / 60 / 60 m/min main drive (S1/S6) 35 / 25 kW total power requirement 92 kVA weight of the machine ca.25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m Operating hours: 113475 Spindle hours: 58183 (June 2026) * 4-axes controlled * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) Cjdpfx Ajzclwlsarsrf * Measuring probe (workpiece) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools.

Condition: used, Year of construction: 2007, operating hours: 70,859 h, machine/vehicle number: 15145361464, Travel ranges (X/Y/Z): 3,600/920/820 mm, with B-axis and integrated NC table, maximum spindle speed: 18,000 rpm, tool interface HSK-A63, 30-position tool changer, pendulum machining, control system SIEMENS Sinumerik 840 D Powerline, chip conveyor, emulsion separator, infrared measuring probe. The customer must ensure that drilling emulsion/lubricants are professionally extracted and disposed of. Cedezqy Umepfx Aarorf

Condition: used, Year of construction: 2015, overall weight: 300 kg, load capacity: 5 kg, terms of delivery: FCA Pegnitz delivery time: on request Csdozq Hqhjpfx Aarjrf terms of payment: 100% prior to delivery

Condition: good (used), mileage: 406,235 km, power: 207 kW (281.44 HP), first registration: 02/2020, fuel type: diesel, tire size: 245/70R19,5, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,550 mm, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Driver's card (recording device) Cedpsxmrqrefx Aarjrf - Halogen lamp - Hydraulic system - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Lane keeping assist - Fabric - Winch = Notes = Number of axles: 2, Configuration: 4x2, Twin tires, Payload: 5530 kg, Tare weight: 6460 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 250 liters, Trailer coupling, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 5729 kg, Axle journal diameter: 40 DIN, Winch, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Driver's card (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Yellow, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane keeping assist, Engine power: 207 kW (278 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Starter battery, Pump, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 245/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Twin tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 6 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Tare weight: 6,460 kg Payload: 5,530 kg GVW: 11,990 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €825 per month (default, 60 months); Inquire for more information and conditions Identification Registration number: 78-BPH-9 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm switched on hours: 78.328 h spindle hours: 38.073 h control: Heidenhain iTNC 530 tool changer with: 30 Plätze tool taper: HSK-A 63 feed speeds infinitely variable: 90 mm/min rapid traverse:: 90 m/min table-size: 950 x 650 mm table load capacity: 1000 kg total power requirement: 73 kVA Weight approx.: 11,0 t dimension machine approx.LxWxH: 4,9 x 4,3 x 3,15 m The DECKEL MAHO DMC 75 V linear is a highly precise vertical CNC machining center equipped with linear drive technology, making it ideal for 3-axis machining. Crsdpfjzp Dvrox Aaref *

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Roller guide: for profile steel shears, flat steel shears... Csdpoznu Atefx Aarerf -Roller spacing: approx. 84 mm -Dimensions: see photos -Dimensions: 245/143/H70 mm -Weight: 5.4 kg

Condition: used, maximum load weight: 2,094 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,020 mm, A12 GW26NG000301 Crodpfxsym Igws Aarjf High-bed tandem trailer, manufacturer STEMA, type SySTEMA SH .2, gross weight: 2,700 kg, High-loader with low frame, 4.01 m x 1.83 m, 10" tyres, 100 km/h approval Loading height: 600 mm Subject to errors and prior sale.

Condition: new, Year of construction: 2025, operating hours: 2 h, feed rate X-axis: 200 m/min, working width: 400 mm, total length: 2,150 mm, working height: 950 mm, input voltage: 400 V, overall weight: 1,850 kg, compressed air connection: 8 bar, Since 1970 Ceetec A/S produces innovative wood painting machines in Norre Aaby, Denmark. Crsdpfx Asffc Unjarjf According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our CNC linear spraying machine is equipped with 3-4 traverses which are controlled by the easy to use touchscreen. We can offer it with 1-2 paint circles for easy color management. Further specification: - painting dimensions: 100 x 400mm (heigth x width) - speed: 10 - 200m/min - capacitiy: up to nearly 12.000 running meter per hour - power connection: 400VAC (other system on request) - air connection: 8bar air pressure - made for painting 5 sides, 6 sides painting optinal possible It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: excellent (used), mileage: 48,000 km, power: 163 kW (221.62 HP), first registration: 01/2010, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: yellow, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 8,930 mm, total width: 2,420 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electric window regulation, trailer coupling, = Additional options and accessories = - Front work lights - Remote-controlled central locking - Air-suspended seats - Sun visor = Notes = 4x2 Euro 5 Flatbed body, 6.85 m Load bed height: 92 cm Hydraulic ramp length: 2.65 m Dutch vehicle Valid MOT (technical inspection) until 15.01.2027 Only 48,000 km! In very good condition! Ready for immediate use. = Further information = Technical information Number of cylinders: 6 Engine displacement: 6,693 cc Front axle: Max. axle load: 4480 kg; Suspension: Leaf spring suspension Rear axle: Max. axle load: 8480 kg; Suspension: Air suspension Weights Unladen weight: 6,200 kg Payload: 5,800 kg GVW (Gross Vehicle Weight): 12,000 kg Functional Load bed height: 92 cm Maintenance, history and condition Credpfxozr Hluj Aarjf MOT (technical inspection): valid until 01.2027 Technical condition: very good Optical condition: very good Identification License plate: BX-HS-46