Used Lns Bar Feeders for sale (21)

Condition: good (used), Bar feeder LNS Hnjdsr Iygispfx Almor

Condition: used, Year of construction: 2015, Brand and Model : LNS ALPHA SL65 S Manufactured year: 2015 Diameter: 6- 67 mm Bar lenght: 300- 1550 mm Loading System: Side load Rack Loading Capacity: 1660 mm Loading: Rear X axis retraction: 300 mm Type of Headstock: Fijo/ Fixed Partial changeover: 5 min.Manual Complete changeover: 8 or less min. Motor: Servo Drive: Notched Belt Hedpfxozl Uu De Almenr

Condition: used, Brand : LNS QUICK LOAD SERVO Total length: 2570 mm Total width: 1340 mm Depth of the bar feeder: 1000 mm Height: 1240-1520 mm Axis height: 900-1180 mm Retraction device: 600 mm Minimum diameter: 6 mm Max. diameter: 80 mm (depending on settings 90mm) Min.bar permissible length: 150 mm Max. Bar permissible lenght: 1470mm (Depending on settings 1500 mm) Max. permissible bar weight: 60 kg Pneumatic feeding: 5 Bar Maximum tyre wear: 6 litres (per loading cycle) Supply voltage: 220-480 volt/ 50 Hz-60Hz Maximum current: 1 A Maximum thrust: 167 Nm Maximum feed rate: > 100 m/min Hnedpfszl E Eaox Almjr Charging time: 8- 12 sec Loading time for short parts: 4-7 sec

Year of construction: 2003, operating hours: 18,000 h, condition: used, functionality: fully functional, Bar feeder with automatic bar feeding system for bars with a diameter of 3 to 32 mm. Hjdpfx Aszrw Duelmjnr It was functioning perfectly until it was replaced with a newer model. It is not possible to see it in operation because it is not connected to the CNC machine. For information on troubleshooting and maintenance, please contact Italmatic, which is the product’s representative in Spain.

Condition: new, Year of construction: 2024, functionality: fully functional, We offer two new LNS bar loader magazines, model LNS GT 326. The mounting side is on the right. Hedpfjzl S Nrex Almenr

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Hedpfxjzl D Hpo Almonr

Condition: good (used), Year of construction: 2007, 1 x loading magazine LNS Sprint 555 Year of manufacture: 2007 Hnodpfx Aljvt N Dyomor Bar processing D: 5 - 55 mm Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach

Condition: good (used), Year of construction: 1988, 1 x oil-flooded single bar feeder LNS Hydrobar 6.60 HS-4,4 Year of manufacture: 1988 In good condition. Technical data: Diameter: 28/36/44/52/58/63 mm Bar length: 3,100 mm Accessories: Machine feet The feeder can be inspected at our warehouse in Reichenbach. Hnsdpfjvawtpex Almer

Condition: used, TECHNICAL DETAILS - min. / max. Ø : 2 / 16 [mm] Hedpsuhbhzjfx Almjnr - max. bar length : 4 [m] - diameter : 17 - 13 - 6

Condition: used, Year of construction: 2018, LNS HYDROBAR HS 6.65 HS4.4 Year of manufacture: 2018 Condition: excellent Hsdpfxezqc Enj Almjnr DIAMETER RANGE: 2 – 68 MM

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Hsdpfx Aswnprxolmonr Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction Hnodpfx Aozp Ihlslmor • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231647, CNC Bar Loader LNS Express 220 Year of manufacture: 2007 Type: Bar Loading Magazine Quick guide channel changeover in less than approx. 2 minutes. Complete exchange of guide elements possible in under approx. 8 minutes. Technical data: Bar diameter range: 2 mm to 20 mm Channel diameter: 22 mm Max. bar length: 3,000 mm Installation dimensions (L x W x H): 3,970 x 480 x 1,250 mm Weight: approx. 850 kg Condition: fully operational Hsdpfx Aozp Iaujlmenr The machine can be inspected under power by prior appointment. Technical data and details are subject to change and error. Subject to prior sale!

Condition: used, TECHNICAL DETAILS - Bar diameter : 5-10-15 [mm] - Max. bar length : 4500 [mm] Hjdpfxsuhbhbe Almonr - Number of bars : 1

Condition: used, TECHNICAL DETAILS - Bar diameter : min/max : 3/10 [mm] Hodpfxeu Agw Te Almenr - Bar length : 3800 [mm]

Condition: used, TECHNICAL DETAILS Hnodpfsvxlmuox Almsr - Bar diameter : 1 - 12 [mm] - Bar length : 2000 [mm]

Condition: used, Year of construction: 2018, LNS QUICK LOAD SERVO III, year 2018 in very good condition. Hnodpfxezpyq Ej Almor

Condition: good (used), Bar length up to 1600 mm. Hnsdpfshvz Hzox Almor Some parts missed. For spare parts.

Year of construction: 1998, condition: ready for operation (used), for material Ø: 6 - 80 mm for bar lengths: 100 - 915 mm Shooting table size: 945 x 800 mm Working height: 1400 mm height adjustable: +/- 200 mm elec. Connection: 220V Hnedpfxodtywwj Almer Space required: 3420 x 1150 x approx. 1500 mm Weight: about 300 kg

Year of construction: 2004, condition: used, bar material dia. 6 - 120 mm Bar length 100 - 1.600 mm bar weight max. 63 Kg feed length 1.000 mm longitudinal adjustment 600 mm machine weight ab. 600 kg Hnjdpfxjyhhrie Almer dimensions of the machine ca. 2,2 x 1,5 x 1,5 m Current operating hours display: 4867 hours

Condition: good (used), LNS EXPRESS 332 installed on TRAUB TNK 36 Very good condition Hnodpfsxxh Htsx Almor