Used Loew Lathe for sale (5,362)

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Gsdpfx Aorfx Tnofnobh Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Gbodsnr Nl Sopfx Afneh Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Gedpfjwmlckjx Afnjbh Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Year of construction: 2017, condition: used, Chester Machine Tools Chieftain 2660 Lathe with Quark DRO, Split Bed, 1400mm Between Centres, 700mm Swing Over Bed, 300mm Sanou 3 Jaw Chuck, 100mm Through Bore, 36rpm min 1600 max, Auto Traverse X & Y, Quick Change 2 Position Tool Post. S/No. 170611104 (2017). Country of Origin: United Kingdom Gsdsyidngspfx Afnebh Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feed: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Mains connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps Gsdsyg Rfiopfx Afnebh - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX size A quick-change toolpost with 3 interchangeable holders - revolving centre - emergency stop - folding chuck guard - coolant system - very low operating hours Space requirements L x W x H: 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: new, Year of construction: 2026, 0330 mm 210 mm 1000 mm Gbsdpfxsygm Sro Afnoh 167 mm 40 mm 2,2 kW

Condition: new, Year of construction: 2025, 0554 mm 2000 mm 277 mm 104 mm 400 mm 2000 U/min Gsdpfxsygm Sls Afnjbh D1-11 DIN 55029 95 mm 145 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Fanuc control, turret with 6 driven tool stations, tailstock, C-axis, bar feeder. Gedpeyhm A Hofx Afnjbh

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm Gjdpfsyg Rbdjx Afnsbh control Fanuc

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 Gbsdpfxjw Ed Tfj Afnsh turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 26.000h Godpfouwv Tgex Afnebh Running hours 24.000h GBL function (standard) LFV function: no

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Control Siemens Yaskawa turning speeds 500-10.000 U/min Gsdpjxukr Dofx Afnobh c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available.

Condition: used, Year of construction: 1996, turning length 1.000 mm turning diameter over bed 400 mm turning diameter over slide 240 mm Gbedoygm Ugopfx Afnjh spindle bore 52 mm spindle tunring speed 30 - 1.600 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Godpfx Afsvyuuqonobh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Gbjdpfx Aevz Hpcofnoh Total power requirement 1,5 kw

Condition: used, Harrison M300 Manual Lathe, 160mm 3 Jaw Chuck, Quick Change Tooling, Distance Between Centres 110mm, 2500rpm. S/No. 307209. Country of Origin: United Kingdom Gbjdpfoyidtiox Afnjh Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments Gbodpfx Asx Rdgpefnsh - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 5,500 mm, turning diameter: 1,000 mm, spindle bore: 105 mm, spindle speed (max.): 1,000 rpm, GURUTZPE AT 600 PLUS LATHE WITH GROUND BED, AUTOMATIC TURRET, AND NEW FAGOR 8058 CNC Gbsdoyivadjpfx Afnsh

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 740 mm, turning length: 6,000 mm, turning diameter: 1,100 mm, spindle bore: 162 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 680 mm, travel distance Z-axis: 1,200 mm, spindle motor power: 42 W, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, overall weight: 15,000 kg, spindle nose: 162, GEMINIS CNC 7 PLUS 1100x6000 lathe Equipped with: 4-jaw chuck 1000 mm 4-jaw chuck 600 mm Gbedpfx Asyiu S Eefnsh 2 fixed steadies Chip conveyor

Condition: excellent (used), Year of construction: 1987, turning diameter 500 mm turning length 1500 mm swing diameter over bed slide 285 mm Gbodpjyg N Rwefx Afnsh total power requirement 11 kW

Condition: good (used), Year of construction: 2016, functionality: fully functional, Fanuc control system, gantry loader, one turret with Y-axis, two spindles, loader is designed for forged or sawn parts. Gbodpfjyg H U Tex Afnjh

Condition: good (used), Year of construction: 1999, functionality: fully functional, Fanuc control, two turrets, sub-spindle, chip conveyor, bar feeder, immediately available. Gbsdjyg Hr Eopfx Afnoh

Condition: good (used), Year of construction: 2010, operating hours: 64,321 h, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Gjdpfox Hwfqox Afnsbh

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe Gjdpfx Afex Hwhfsnobh - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA Gedox Hwgujpfx Afnsbh The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck