Used Loew Lathe for sale (5,381)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Codpfx Aov Nw Npofnopu Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Cjdewwaruepfx Afnspu Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Cpodovzln Ropfx Afneu Special chuck is available

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Cpjdpfx Afswwar Ijnou Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 370 mm, spindle bore: 90 mm, turning diameter over bed slide: 560 mm, center height: 230 mm, turning length: 3,000 mm, Tarnow Heavy Duty Gap Bed Lathe Model: TUJ 50 M Swing Over Bed: 560mm Swing Over Top Slide: 370mm Swing In Gap: 800 x 250mm Distance Between Centres: 3000mm Spindle Speeds: 20-1600 RPM Spindle Bore: 90mm Machine With: Cjdpoygk Azofx Afnspu 16’ 4 Jaw Chuck Fixed Steady Coolant Pump & Fittings Lo-Voltage Light Dimensions: 4770 x 1175 x 1390mm High Weight: 2880 KGS

Condition: good (used), functionality: fully functional, turning length: 350 mm, turning diameter: 220 mm, spindle bore: 50 mm, Nakamura Tome CNC Lathe Model: TMC 20 Control: Fanuc OTC Capacity: 220 x 350mm With: Cpjdpfsygkzdex Afnsu 200mm 3 Jaw Power Chuck Spindle Bore 50mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, turning length: 2,000 mm, turning diameter: 540 mm, spindle bore: 166 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 6 rpm, Mazak Slant Turn 40N CNC Lathe Model: 40N Cpjdpfx Aoygkw Ssfnju Year: 1990 Control: Mazatrol T32-2 Swing over Bed: 540mm (21.5”) Distance between centres: 2000mm Spindle Speeds: 6-3000rpm Spindle Bore: 166mm Dia. Machine with: 15 station indexing turret 3 – jaw power chuck Tool Prestter Swarf Conveyor

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING Cpodpfex Dmi Djx Afneu 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: good (used), For Sale CAZENEUVE HB 575 Lathe – 3 Metres Between Centres General Description: Brand: CAZENEUVE (France) Model: HB 575 Type: Heavy-duty / Industrial Lathe Distance between centres: 3,000 mm Applications: Machining of long and cylindrical parts for heavy mechanical engineering, aerospace, energy, manufacturing of large shafts, drums or special components. Technical specifications: Maximum turning diameter: ~575 mm (to be confirmed depending on chuck and tailstock) Maximum length between centres: 3,000 mm Centre height: ~285–300 mm (to be verified on machine) Cross slide travel: ~500–600 mm Chuck: depending on configuration (often 4 or 6 jaws, diameter suited for long parts) Cpedeyhncnopfx Afnju WITH 3 STEADY RESTS BT MACHINES PURCHASE & SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Cpsdpfoxp Hudox Afnju

Condition: excellent (used), Year of construction: 2004, turning diameter 850 mm turning length 2200 mm Cjdpfjyhrb Usx Afnjpu control Siemens 840 D

Condition: used, Year of construction: 2009, dist. between centers 4.500 mm greates pass round over bed 820 mm Maximum cutting diameter 530 mm control Heidenhain Manual Plus 4110 workpiece weight max. 2.500 kg spindle bore 128 mm spindle nose DIN 55027 B11 turning speed range - spindle 0 - 1800 U/min phase 1 0 - 450 U/min phase 2 20 - 1.800 U/min Max. torque stage 1 3.000 Nm Max. torque stage 2 540 Nm travel -x axis 360 mm travel -z axis 4.500 mm feed capacity - x 10 kN rapid traverse 10.000 mm/min dia. of quill 115 mm total connected load 55 kVA machine weight ab. 7000 kg dimensions of the machine ca. 6.500 x 1.840 x 1.860 mmxmmxmm Equipment/accessories: -1 x faceplate -5 x jaw chucks -1 x closed steady rest -Clamping jaws -Multifix holder -Turning tools -Various tips -Technical documentation Cjdpfsyhq Tvox Afnepu

Condition: good (used), Year of construction: 2007, CNC FUSION 640 T, machinable diameter 810 mm, distance between centers 3107 mm, spindle bore 320 mm, driven tools, manual steady rest 300 to 610 mm, and hydraulic follow rest 150 to 350 mm, 12-position tool turret, CONCEP conveyor Cpedpfxeygxnxo Afnou

Condition: used, Year of construction: 1960, spindle travel 3000 mm Cedoyhrcfspfx Afnopu spindle stroke - max. 330 mm 2820

Condition: good (used), Year of construction: 1993, turning diameter over bed 400 mm Cpjdsyhq Tpjpfx Afneu turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2018, Automation system Turning diameter over bed: 760 mm • Turning diameter over cross slide: 600 mm • Maximum turning diameter: 460 mm Distances • Distance spindle – tailstock center (TA640): 689 mm • Distance chuck – tailstock (TA640): 625 mm Travel paths • X-axis travel: 310 mm • Z-axis travel (TA640): 640 mm • Y-axis travel: +70 / −50 mm • B-axis travel (TA640): 640 mm Rapid traverse • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 15 m/min • Rapid traverse B: 11 m/min (optional 30 m/min) Axis dynamics • Axis acceleration: 1 g (9.8 m/s²) Spindle • Maximum spindle speed: 3500 rpm • Spindle bearing Ø outer: 200 mm • Spindle bearing Ø inner: 130 mm • Spindle nose: ASA 8” A2 • Spindle bore: 86 mm • Bar capacity through draw tube: 78 mm Chuck • Chuck Ø: 250 / 315 mm • Chuck bore Ø: 77 mm Power & Torque • Main spindle power: 42 / 27 kW (max. / S6 40%) • Maximum torque: • 1020 Nm (max.) • 720 Nm (S6 40%) Tailstock Csdeyhqg Nopfx Afnepu • Morse taper: MT5 / MT3 • Tailstock travel (TA640): 640 mm • Maximum quill pressure: 1350 kgf

Condition: good (used), Year of construction: 2018, Turning diameter over bed: • 760 mm Turning diameter over cross slide: • 600 mm Maximum turning diameter: • 460 mm Distance spindle – tailstock center TA400: • TA15: 490 mm • TA20: 473 mm • TA25: 473 mm • TA30: 449 mm TA640: • TA15: 730 mm • TA20: 713 mm • TA25: 713 mm • TA30: 689 mm TA1100: • TA15: 1190 mm • TA20: 1173 mm • TA25: 1173 mm • TA30: 1149 mm Distance chuck – tailstock TA640: • TA15: 666 mm • TA20: 649 mm • TA25: 649 mm • TA30: 625 mm TA1100: • TA15: 1126 mm • TA20: 1109 mm • TA25: 1109 mm • TA30: 1085 mm Travels X-axis: • All models: 310 mm Z-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Y-axis: • +70 / −50 mm (for Y versions) B-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Rapid traverses X-axis: • 30 m/min Z-axis: • 30 m/min Y-axis: • 15 m/min B-axis: • 11 m/min (standard) • 30 m/min (option) Axis acceleration: • 1 g = 9.8 m/s² Spindle Maximum spindle speed • TA15: 4,500 rpm • TA20: 4,000 rpm • TA25: 4,000 rpm • TA30: 3,500 rpm Cpodsyhqavjpfx Afnju Spindle bearing Ø outer • TA15: 150 mm • TA20: 170 mm • TA25: 170 mm • TA30: 200 mm Spindle bearing Ø inner • TA15: 100 mm • TA20: 110 mm • TA25: 110 mm • TA30: 130 mm Spindle nose • TA15 / TA20 / TA25: ASA 6" A2 • TA30: ASA 8" A2 Spindle bore • TA15: 61 mm • TA20: 73 mm • TA25: 73 mm • TA30: 86 mm Bar capacity through draw tube • TA15: 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 78 mm Chuck Chuck diameter: • TA15: 175 / 210 mm • TA20: 210 mm • TA25: 250 / 210 mm • TA30: 250 / 315 mm Chuck bore Ø: • TA15: 56 / 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 77 mm Power & torque Main spindle power (kW): • TA15: 14 / 8 • TA20: 22 / 15 • TA25: 35 / 19 • TA30: 42 / 27 Maximum torque: • TA15: 292 Nm (max) / 153 Nm (S6 40%) • TA20: 366 Nm (max) / 286 Nm (S6 40%) • TA25: 900 Nm (max) / 363 Nm (S6 40%) • TA30: 1020 Nm (max) / 720 Nm (S6 40%) Tailstock Morse taper: • MT3 / MT4 Tailstock travel: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Max. quill pressure: • TA15: 930 kgf • TA20: 980 kgf • TA25: 980 kgf • TA30: 1350 kgf

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. Cpodevp Shgjpfx Afnou - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Empty weight: 9.000 kg Price: On request Cpsdpfoyg Hi Rox Afnou - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 8000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Distance between centers 2000 mm Max. swing over bed 560 mm Cedpfx Afjygxdaonepu Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, rotational speed (min.): 25 rpm, rotational speed (max.): 1,500 rpm, Distance between centers 1000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Csdpfx Asygxcpefnopu Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Cpjdpfeygxb Ejx Afnou Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm Cpodpfx Asygxa Iofnju If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1000 mm Max. swing over bed 460 mm Cpedpfxjygw Uks Afnou Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Cjdpfxoygw Hmj Afnepu Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.