Used Long Thread for sale (8,781)

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Dsdpowk Nxqjfx Ap Iewc Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, empty load weight: 5,600 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2006, suspension: air, tire condition: 75 %, load capacity: 32,400 kg, • Pneumatic unlocking system • Electro-hydraulic power unit • Sliding carriage Dwodpfxsy U Rt Dj Ap Isc • Drum brakes

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Dwjdpfx Apjzk Iyqo Ijc Steinel BT 6.52 with coolant system + small vise Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on.

Condition: used, empty load weight: 8,430 kg, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2026, tire size: 235/75 R17.5-235/75 R17.5, Year of construction: 2023, ref: 54781 Equipment: * Side impact protection, * Tool box: 4, * Rear door design: rear portal doors, * Locking rods on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Lifting roof, * Floor: plywood floor, * Recessed strip (aluminum): 40, * Air connection: Other: Yellow / Red + Duomatic, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, Dwodpfezmivxjx Ap Isc * EBS VIN: WFDFLT33901013129 Tire size: 235/75 R17.5 Internal length: 14.8m Width: 2.55m Internal width: 2.46m Height: 4m Internal height: 3m

Condition: good (used), Thread-cutting machine, STEINEL Dwodpfxoztczuo Ap Ijc

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 07110-10-6542, functionality: fully functional, operating hours: 200 h, power: 3.25 kW (4.42 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 6,800 mm, grinding height: 240 mm, height adjustment type: electric, grinding belt speed: 1,900 mm/s, actuation type: electric, total length: 3,700 mm, total width: 1,450 mm, overall weight: 300 kg, Equipment: CE marking, documentation/manual, WIDE BELT GRINDING MACHINE, Type LZG-KE Machine type: LZG-KE Year of manufacture: 2010 Machine number: 07110-10-6542 Motor power, grinding belt: 3.0 kW - Total connected load max.: 3.0 kW - Operating voltage: 400 V, three-phase - Operating current: 7.4 A - Type of protection for electrical system: IP 54 - Installation-side connection cross-section: 5 x 2.5 mm² - Installation-side short-circuit protection: 16 A Grinding belt dimensions: 6800 x 150 mm Grinding shoe dimensions: 320 x 145 mm 420 x 145 mm Stand overhang: 680 mm Stand overhang height: 340 mm Size of support table: 2500 x 800 mm Permissible weight load on support table: 100 kg Minimum workpiece length when grinding with a grinding shoe: 350 mm Grinding speed: approx. 19 m/s Table height adjustment range: 240 mm Dimensions: see drawing no. 13 Weight: 300 kp Dwsdpfxezqa Iyj Ap Isc New, wide belt grinding machine for sale, only used occasionally. Ready for immediate collection or testing.

Condition: new, Year of construction: 2026, GT12 90° Tapping Spindle Positioning Adapter The GT12 90° tapping spindle positioning adapter is an innovative and precise tool designed to ensure reliable spindle positioning at the correct angle relative to the workpiece. Thanks to its neodymium magnet technology and precision setting gauge, the adapter enables quick and accurate alignment of the tapping machine, improving the efficiency of the tapping process and ensuring high-quality threads. It is a tool developed for professionals in the metalworking industry who require improved accuracy and stability during operation. Main advantages of the GT12 positioning adapter Precise alignment: Thanks to the integrated neodymium magnet, the adapter allows accurate positioning of the tapping machine at a 90° angle to the workpiece, which is essential for producing precise threads. Easy operation: The positioning procedure is quick and simple, allowing efficient machine setup without complicated adjustments. Solid construction: Manufactured from high-quality materials, the adapter ensures durability and resistance to intensive use in demanding industrial conditions. Compatibility: The GT12 adapter is designed for electric tapping machines, making it a versatile solution for use with tapping units and tapping arms. Innovative positioning system: The combination of a magnetic mount and a 90° setting gauge enables fast alignment of the tapping machine, reducing setup time and providing full control over the machining process parameters. Design and technology of the GT12 positioning adapter The GT12 positioning adapter has been developed to provide maximum precision and efficiency during tapping operations. The integrated neodymium magnet allows quick and secure attachment to the workpiece. Its high magnetic force ensures stability and safety during operation, eliminating the risk of unwanted movement. The positioning system based on a 90° precision setting gauge gives the operator full control over spindle alignment, which is crucial for achieving accurate and consistent thread quality. The GT12 adapter is fully compatible with electric tapping machines available on our website, including models such as RGE16PW, making it a versatile tool that can be easily adapted to various devices and applications. Precision and work efficiency with the GT12 adapter The GT12 spindle positioning adapter guarantees high accuracy during every setup, resulting in precise tapping and faster achievement of desired results. Its main advantage is the ability to position the tapping arm spindle exactly perpendicular to the machined surface. Dwjdpfxsv Axu Tj Ap Ioc This ensures more accurate threading while significantly reducing the risk of spindle alignment errors. In addition to improved precision, the adapter increases productivity by enabling fast positioning and reducing preparation time, leading to more efficient workflow. Technical specifications of the GT12 positioning adapter Type Neodymium spindle positioning adapter Compatible tapping machines RGE16PW, RGM16W, RGM16W Angle range 90°

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Dwedpfx Aevyyyxjp Iec Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: good (used), Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck Dwjdov T Ufcjpfx Ap Ioc -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Dwjdevk D Rpopfx Ap Iec Manufacturer SONE Type: 2000 . 230V .

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Dwjdexytmhspfx Ap Iec Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: good (used), Approx. 54 long material racks, 3m long – used -: Only complete lot purchase: Djdpfjw Hqkyox Ap Iswc Price per item ex location: €139 (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Dimensions, approx.: L: 3m, H: 0.66m, D: 0.80m Own weight: approx. 127kg Condition: good Available: immediately Location: 67346 Speyer

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: Djdpsw Hquxsfx Ap Iowc • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: good (used), Year of construction: 1993, Offer 21377 Djdpfxer Hnl Ro Ap Iewc Technical data approx: - 21 storage levels / compartments with shelves - 18 x shelf height approx. 100 mm - 3 x compartment height approx. 150 mm - Shelf - total width inside 1380 mm - Shelf - total length 2600 mm - Space requirement W 1500 x D 2600 x H 3480 mm - Folded transport height 2600 mm

Condition: good (used), Year of construction: 1993, Offer 22459 Technical data approx: - 13 storage levels / compartments with shelves - 11 x shelf height approx. 100 mm - 2 x compartment height approx. 150 mm - Shelf - total width inside 1380 mm - Shelf - total length 2600 mm - Space requirement W 1500 x D 2600 x H 2350 mm Djdpsr Hnvlsfx Ap Ijwc

Condition: good (used), Thread cutting machine, Hahn und Goebel HG 12E Djdpfx Apod Rkbre Iewc Spindle speed: 180-900 rpm 380V Machine no. 1917/16 M4-M65

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter Dwsdpod Scp Usfx Ap Ioc -Inch thread: 1/4 - 1 inch -Dimensions: 550/120/100 mm -Weight: 4.7 kg

Condition: good (used), Cutting area, internal thread: M2 - M12 Working radius approx.: 1650 mm Dwsdpfxsd D U T Ho Ap Isc

Condition: used, Year of construction: 1992, used wide belt sander MS95-150 incl. conversion Technical data: Year of manufacture: 1992 Manufacturer: Johannsen The machine is under power and can be inspected by appointment! Dwjdpfxoyfga Te Ap Iec Table size approx.: 2360 x 950 mm Sanding belt height approx.: 1000 mm Max. sanding area: 2000 x 850 mm Passage under sanding belt: approx. 340 mm Throat approx.: 550 x 310 mm Belt speed: 11 + 22 m/sec Belt drive motor: 4 / 5.5 kW Belt dimensions: 150 x 7000 mm Max. table load: 80 kg – Table may only be adjusted when unloaded – Extraction nozzle left, horizontal, D: 180 mm Required extraction capacity/h, min.: 2400 m³ Operating voltage: 400 V, 50 Hz Machine color: RAL 6011 reseda green Manually operated For processing steel, stainless steel, and brass Not suitable for aluminum and titanium Machine equipped as follows: Double-sided throat Pole-changeable belt drive motor Laminated wood table slats Contact roller sanding unit complete with rubber contact roller D 100 x 145, approx. 50° Sh Additional sanding shoe approx. 150 mm long with bracket for mounting in the U-bracket

Condition: refurbished (used), Currently undergoing rebuilt, it is possible to customize it. Dwodpfxjzcd Hfe Ap Ijc Ingramatic RP1 Fixed die length: 85 mm. Moving die length: 95 mm. Die thickness: 25 mm. Die height: 65 mm. Thread diameter: M2 ÷ M6 Shank length: 100 mm. Thread length: 62.5 mm. Speed Range up to: 600 pcs./min.

Condition: used, Crane track rails – steel beams HE-B 300 from an 11-meter long hall Beam width: 300 mm Beam height: 300 mm Middle web: 11 mm Track rail: 50 x 30 mm Beam length: 2 x 10550 mm (total length 21100 mm) - A 5-ton crane ran on these crane track rails. Dwodpfx Aezinz Eep Isc - It was installed in a 10-meter hall. - The beams are one-piece, without a butt flange joint. - Consisting of 2 x 10550 mm - White painted Self-weight per meter of crane track rail: 120 kg + 11.7 kg = 131.7 kg/m Self-weight of the crane track rails: approx. 2780 kg

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement Dedox A Imzopfx Ap Iewc 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 4691, thread length: 125 mm, overall weight: 2,000 kg, workpiece diameter (max.): 70 mm, spindle diameter: 6,985 mm, type of input current: three-phase, roll diameter: 195 mm, spindle speed (max.): 90 rpm, spindle speed (min.): 20 rpm, total height: 1,185 mm, total length: 1,320 mm, total width: 1,090 mm, This is a fine example of a very little used Eurfurt thread rolling machine. Although the machines signifies 12.5tons it can easily achieve 20tons rolling force. Comes with all original equipment supplied. Machine can be used in manual, semi-automatic and automatic cycles and also has the facility to re-roll. Dwodpezhw Edefx Ap Iec Can be seen running.

Condition: ready for operation (used), functionality: fully functional, thread length: 350 mm, workpiece diameter (max.): 30 mm, FETTE thread rolling machine, type: R30, without head Thread rolling heads for M6 to M30 - M42 can be used. Dsdpfx Ajzmpbujp Ijwc The thread rolling range depends on the head used. Maximum thread length: 360 mm 6 spindle speeds: 500–4800 rpm Hydraulic vise Automatic operation possible. Weight approx.: 850 + 150 kg

Condition: used, Year of construction: 1979, Belt width: 150 mm Belt length: mm Table size: approx. 2600 mm x 1000 mm Extraction connection: Motor power: 3 kW Dodpfxewm Nrpo Ap Ijwc Machine length: Machine width: Weight: 900 kg