Used Maha Lps 3000 for sale (5,299)

Condition: excellent (used), Year of construction: 1980, For sale: a wire brush grinder in good condition. - 1500/3000 RPM. Pgsdpoz Sk H Nofx Ab Tju - 380V.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Pgsdpfx Ae Adgrpsb Teu Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF Pjdoz D Tt Tepfx Ab Tegu - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, TECHNICAL DETAILS General Information Year of manufacture: 2021 Operating hours: 3,269 h Condition: ready for operation Own weight: 4,113 kg Lifting Data Load capacity: 2,500 kg Lifting height: 3,670 mm Mast: Standard, 2W367 Fork carrier: FEM 2A Fork length: 1,200 mm Drive and Engine Drive: 4-cylinder diesel engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: Doosan Engine model: PM02V Tires Pgedpoz Scqajfx Ab Teu Front tires: Superelastic 23 × 9–10, 80% Rear tires: Superelastic 21 × 8–9, 50% Dimensions Overall length: 2,650 mm Overall width: 1,200 mm Overall height: 2,480 mm Height: 2,480 mm

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Pedszn N Ikjpfx Ab Togu

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure Pgsdpfx Asz Rl Hyeb Teu - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Dimensions & Weight Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Pgjdpfx Aezgr Scob Tsu Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Efficient material processing with stable output quality Additional Information CE certified Modern machine (2024) – very good condition

Condition: used, functionality: fully functional, For sale: a brushless servomotor, BOSCH SE-LB3.075.030-04.000, with permanent magnets and a 24 V holding brake. Technical specifications according to the nameplate: Manufacturer: BOSCH Type: SE-LB3.075.030-04.000 Number: Stock number: 104-915 093 Starting torque (M₀): 8.7 Nm Starting current (I₀): 8.0 A Rated speed: 3000 rpm Rotor moment of inertia: 17.9 kg·cm² Ingress protection rating according to the nameplate: IP65 Insulation class: F Holding brake: 24 V, 8 Nm, 0.8 A Country of manufacture: Germany — Made in Germany Pgedpfx Abo Adt Nhs Tju Condition: Used, functional motor. Damaged plastic housing of one of the electrical connectors — a fragment broken off around the pins, as shown in the pictures. The connector requires repair or replacement before use.

Condition: used, machine/vehicle number: LC573, Used olive oil processing line VITONE V3 3000 kg/hr Pgodpo Adt Rxofx Ab Tou The Used olive oil processing line VITONE V3 3000 kg/hr delivers a complete solution for olive oil extraction. Industrial olive mills and professional oil producers use this line to achieve efficiency, operational continuity, and consistent oil quality. The system processes up to 3000 kg of olives per hour, offering high performance while reducing capital investment compared to new equipment. Technical configuration of the processing line VITONE manufactures every component of the Used olive oil processing line VITONE V3 3000 kg/hr. As a result, the system offers seamless mechanical integration and compatibility between modules. Moreover, technicians benefit from simplified maintenance procedures. Operators can run the line continuously without compromising output quality. In particular, VITONE uses certified food-grade materials that resist corrosion and mechanical wear, ensuring long-term durability. Olive washing and feed system The VITONE V3 olive washer initiates the process. It uses water and agitation to remove leaves, stones, and soil. Subsequently, the integrated elevator feeds clean olives directly into the crusher. This approach, in turn, minimizes downtime and reduces manual handling. In addition, the enclosed design improves workplace hygiene and reduces contamination risks. Traditional olive crushing The VITONE granite millstone crushes the olives at low rotational speeds. Because of this, the system preserves phenolic content and aroma compounds. Therefore, the machine enables producers to obtain oil with superior sensory qualities. Operators favor granite millstones for high-quality extra virgin olive oil, especially in artisanal production contexts. In other words, this equipment combines tradition with technical efficiency. Paste mixing with thermal control After crushing, the paste pump transfers the olive paste to the VITONE malaxers. These units mix the paste while maintaining precise temperature control. This step is critical, as it promotes coalescence of oil droplets. Consequently, the system prepares the paste for high-yield separation. In addition, thermal stability prevents the degradation of volatile compounds, preserving quality. Solid-liquid separation The VITONE decanter centrifuge separates the solid phase (pomace) from the liquid phase (oil and water). This machine handles 3000 kg/h and operates continuously. Thanks to its high throughput, it ensures stable processing under demanding conditions. Furthermore, the decanter maintains excellent oil recovery rates and leaves minimal residual oil in the pomace. As a result, it significantly reduces waste. Final clarification and oil polishing Two VITONE vertical separators perform the final stage of oil clarification. These machines remove fine solids and water traces from the extracted oil. Notably, the built-in collection tubs simplify ...

Condition: good (used), Year of construction: 2007, operating hours: 52,506 h, functionality: fully functional, punching force: 180 t, sheet thickness (max.): 6 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,660 mm, punching diameter: 76 mm, workpiece weight (max.): 230 kg, overall weight: 16,000 kg, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, space requirement width: 6,800 mm, space requirement length: 7,600 mm, space requirement height: 2,500 mm, Equipment: safety light barrier, Special equipment: + MultiShear function + MultiTool function + Brush tables Standard equipment: - Safety light barriers - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives Pgsdpfx Abjz En Iuj Tju - Automatic repositioning - Tool length compensation - Small parts chute 500x500 mm - Punching slug extraction - Tool spray lubrication - Automatic tool change - Programmable punching tool lubrication with 2 containers - Programmable stripper - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphics programming - Online diagnostics via modem - Operating manuals.

Condition: good (used), Year of construction: 1981, machine/vehicle number: 2627, Offer 26236 Technical Data: - max. working width 3040 mm - max. material thickness ST 37 4 mm - swiveling upper beam - bending angle adjustment, electronically pre-selectable 0 - 135° - max. lifting height of the upper beam 350 mm - lifting height of the upper beam, electronically pre-selectable - adjustability: - of the bending beam 125 mm - of the lower beam 125 mm - upper beam drive 400 V / 4.0 kW - bending beam drive 400 V / 5.5 kW - space requirement approx. W 3950 x H 1600 x D 1200 mm - weight approx. 4800 kg - includes: Pgedjz Nypgepfx Ab Tsu - foot pedal - bending rails - backstop

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Pgjdpfe Aau T Hjx Ab Tju Main Spindle: Technology:Belt-driven spindle Speed (max.):3,000 rpm Power (max.):26 kW Bar capacity:91 mm Workpiece clamping:3-jaw chuck, SAMCHULLY HS-12 Tool holder: Technology:12-station turret Tool holder:BMT65 Tool drive:5,000 rpm Travel in X/Y/Z:215/-/560 Main Spindle: Technology:Trailed tailstock Stroke:100 mm Quill diameter:110 mm Taper:MT5 Main Spindle: Chip Management:Chip Conveyor Coolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 bar Tool Measurement:Automatic Measuring Arm Automation:Prepared Finished Part Removal:Part Catcher with Collection Box Setup Mode:Electronic Handwheel

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Pgodszq Dczspfx Ab Tsu Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: ready for operation (used), Year of construction: 1973, travel distance X-axis: 850 mm, travel distance Z-axis: 2,900 mm, controller manufacturer: SIEMENS, number of axes: 2, Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details. Podpfx Abe Adp Tve Tsgu - Turning Length between Centers: Approx. 2850 mm- Faceplate Diameter: Ø 630 mm- Drive Power: 32 kW- Operating Hours: Approx. 60,000h - 70,000h (mathematically calculated after 1998 retrofit)- Control Unit: SIEMENS CNC Control- Additional Accessories / Scope of Delivery: Complete machine, 1x hydraulic steady rest (Ø 50 mm - Ø 150 mm), faceplate Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Pgedpfx Aez Sllmeb Tou

Condition: like new (used), functionality: fully functional, CMU Shear 3000 x 8/10 Model 2E0 6/30 Motorized Backgauge Pgedpfey R Diwex Ab Tou Blade Angle Adjustment Used Machine Internal Code: SER 63

Condition: good (used), functionality: fully functional, Universal lathe SU63A/3000, accessories. Pedpfxj Af Ah Ns Ab Togu

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Pgjdpfx Abj Afvfho Tou Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Pedez H Ah Sepfx Ab Togu

Condition: used, Year of construction: 1987, Parallel lathe PBR, type TM-30 Distance between centers: 3000 mm Max. diameter over bed: 620 mm Max. diameter over cross slide: 400 mm Max. diameter in bed gap: 860 mm Spindle diameter: Ø 105 mm Spindle speed: 15 – 1500 rpm 3-jaw chuck, Ø 315 mm Year of manufacture: 1987 Motor: 15 hp Threading: Metric + Whitworth Tailstock: MK5 Equipment: 1 x 3-point fixed steady rest Rapid traverse Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4.5 t Pgsdpfx Ae Acd N Neb Tou

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Brand: PFG Machine Tools Model: CL Vumaz X 3000 Machine Type: 5-axis moving column machining center Year of Construction: 2010 CNC Control: HEIDENHAIN iTNC-530 Axis Travels X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm A-axis travel – Tilting head: +95° / -95° C-axis travel – Rotary table: 360° Work area for pendulum machining with vertical spindle: 2 zones of 1,300 × 1,000 mm Rapid traverse rates for X / Y / Z axes: 30,000 mm/min Main Table Table dimensions: 3,200 × 1,060 mm Maximum table load: 2,500 kg/m² Diameter of rotary table: Ø 800 mm Maximum rotary table load: 2,500 kg C-axis with 360° rotation Spindle Spindle taper: HSK-A63 Maximum spindle speed: 18,000 rpm Spindle motor power: 25 / 38 kW Spindle motor torque: 116 / 200 Nm Automatic Tool Changer Magazine capacity: 32 tools Maximum tool diameter with occupied positions: Ø 80 mm Maximum tool diameter with empty positions: Ø 130 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool selection: fixed position Dimensions and Weight Approximate machine dimensions: 5,800 × 3,800 × H 3,500 mm Net machine weight: 24,000 kg Power consumption: 40 kVA Measuring Systems Measuring scales on X / Y / Z axes Automatic tool presetter Renishaw Measuring and positioning system for linear axes Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps CTS pump for high-pressure coolant through the spindle Spindle line cooler Dedicated fume extractor Accessories Set of HSK-A63 tapers Various tools Renishaw tool presetter Dedicated fume extractor 2 magnetic tables Zero points Tank and chip conveyor Washing pumps Pgedpfx Absz Iaw To Tju High-pressure CTS system Spindle line cooler Scales on X / Y / Z axes Documentation Machine manuals Electrical diagrams CE Declaration of Conformity Main Features 5-axis moving column machining center HEIDENHAIN iTNC-530 CNC control Large X-axis travel of 3,000 mm Y and Z axis travels of 1,000 mm Tilting head with A-axis from +95° / -95° Rotary table Ø 800 mm C-axis rotation of 360° Possibility of pendulum machining on 2 zones of 1,300 × 1,000 mm High-speed spindle up to 18,000 rpm Spindle power 25 / 38 kW Maximum torque 116 / 200 Nm HSK-A63 tool holder Automatic tool changer with 32 tools Rapid traverse rates up to 30,000 mm/min Renishaw tool presetter Scales on X / Y / Z axes High-pressure CTS system through the spindle Spindle line conditioning Chip conveyor and washing system Dedicated fume extractor 2 magnetic tables with zero points Complete with a set of HSK-A63 tapers and various tools Complete with manuals, electrical diagrams and CE Declaration

Condition: good (used), Year of construction: 1993, Sheet metal storage system, Stopa, 491 storage locations for sheet metal 1.30 x 2.50m and 1.50m x 3m, – used: Price ex works: €65,000 (net), plus dismantling, etc. Manufacturer: Stopa Type: SLBS 3000 UL (Serial No. 93449) Year of manufacture: 1993 / Modifications in 2013 (Retrofit) and 2019 Storage height: 6,400mm Width (without attachments): Overall: 5.26m, Front: 5.17m Length: approx. 60m Sheet metal format Front: 1,300 x 2,500mm Sheet metal format Overall: 1,500 x 3,000mm Load capacity per pallet: 3,000kg Storage locations Front: 359 Storage locations Overall: 132 No existing cassettes: to be clarified 35 towers / bays Storage capacity: 1,473t Over the years, various punching/laser cutting machines have been connected to this storage system, i.e. machines with an interface to the storage system. Manual bending presses and deburring/grinding machines do not have an interface to the storage system. The loading and unloading stations are controlled via the storage management system and moved manually from the storage location to the desired position. 2013 > Retrofit modification: 4.1 Key aspects of this modification: 4.1.2 New main control panel with control computer 4.1.3 Data transmission to the stacker crane (RGB) via data light barrier 4.1.4 Lifting mechanism with two new Profi-Bus rotary encoders for height positioning, which monitor each other. 4.1.5 Encoder of the traverse for the telescopic fork was replaced with a Profibus-compatible rotary encoder 4.1.6 Control cabinet of the RGB was completely renewed 4.1.7 New circuit diagrams for the RGB and the I/O modules were created. 4.1.8 The safety technology was not changed 4.1.9 The speed of the axes (longitudinal travel, lifting mechanism, fork) was not changed. 4.1.10 The drives on the RGB and the controllers in the stationary RGB cabinet were converted to asynchronous servo motors with frequency converters. 5) 2015 > Connection of Trumpf L3030 to our distribution line 2 5.1.1 Key aspects of this modification: 5.1.2 Modification of station 4 and 6, loading and unloading side was swapped 5.1.3 Modification of safety interfaces of station 4 and 6 from 1 to 2-channel 5.1.4 Trumpf L3030 LiftMaster connection 6) 2017 > Order for Retrofit expansion concept, stage 1-3 6.1 Key aspects of expansion stages 1-3 (implemented by 08.2018) 6.1.2 Stage 1: Connection of the new TruLaser 3030 Loadmaster to VT 1 with modification of loading and unloading station 3 (Overall and Front) 6.1.3 Stage 2: Modification of the steel structure blocks from Front to Overall (28, 30, 32, 34, 36), relocation of stations 19 and 20 including update of the station control from Siemens S5 to S7 including 56 flat pallets Overall 6.1.4 Stage 3: Update of the station controls to Siemens S7 without VT1 and VT2 7) 2018 > Order for Retrofit expansion concept, stage 4-5 7.1 Key aspects of expansion stages 4-5 (planned implementation April – June 2019) 7.1.1 Stage 4: 7.1.2 Dismantling of the STOPA storage SBLS tower 1 and tower 2 (in-house work) 7.1.3 Modification of distribution line 1 and 2 7.1.4 New distribution trolley 1 Pgodpfx Abjz Tdyws Teu 7.1.5 New control for distribution line 1 and 2 7.1.6 Stage 5: 7.1.7 New storage management software STOPA WMS 4.0 DYNAMIC The modification of expansion stages 4 – 5 will be carried out without any significant changes to the system and on the basis of the updated safety measures. Condition: good Available: immediately Location: Germany, NRW PDF plan available – we will gladly send it upon request!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm horizontal, height max. 1400mm Diameter of face plate 1400mm Podpjq U Ac Defx Ab Tsgu Angle of inclination min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW we have a huge selection of turntables in all sizes from 100 kg to 30 tons load capacity Used and new machines

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, sheet thickness (max.): 6 mm, HACO SHEARING MACHINE 3000 X 6 HYDRAULIC MODEL: HSLX 3006 MOTORIZED BACK GAUGE Pgedpfx Aoz Sbxpsb Tou IN GOOD VISUAL CONDITION USED MACHINE, IN WORKING ORDER INTERNAL CODE: SVR 448

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Self-loading press for laminated wood Steton P111 3000×1300 Working length: 3000 mm Working width: 1300 mm Pgsdpfx Aoyuah Asb Teu Automatic material loading Shelves heated by oil Diameter of vertical pistons: 70 mm Diameter of horizontal pistons: 50 mm Year of manufacture: 2006 Total power: 24.5 kW CE certificate