Used Maxxmill 500 for sale (15,460)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y Gtjdpfx Abeyg E R Hjrou 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Auction of a Weinig Unimat 500! Gtsdpfx Aboyh Uw Njrju The machine will remain in operation until mid-May. Viewing can be arranged by appointment!

Condition: good (used), Item: D-2929-Cheese cutting machine Cheese dividing / cutting machine, Gtsdeh D H T Hepfx Abrou Semi automatic pneumatic type, Stainless steel for cheese block up to 500 mm Please contact us for more information. Many tools for offer!

Condition: good (used), mileage: 669,400 km, power: 375 kW (509.86 HP), first registration: 12/2016, fuel type: diesel, tire size: 385/65/22,5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 550 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, fog lights, trailer coupling, - Brake booster - High beam - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Reversing camera - Sleeper cab - Sun visor - Stability control - Toolbox - Xenon lighting - PTO (Power Take-Off) 1x Volvo FH500, 6x2*4, Euro 6, Transmission: i-Shift, 669,400 km, Hooklift: 18-ton HIAB + remote control, Year: 2017, 9,000 kg front axle, 3rd axle with lift and steering function, air conditioning, navigation, reversing camera, electric windows and mirrors, first registration: 01.11.2017, Webasto (auxiliary heater), suspension: steel/air, ABS, total length: 8350 mm, total width: 2520 mm, total height: 3600 mm, gross weight: 28,000 kg, unladen weight: 12,140 kg, payload: 15,860 kg, wheelbase: 4600 mm, tires: 385/65/22.5 (90% tread depth) 315/80/22.5 (90%), radio/CD player, aluminum fuel tank (550 liters), last inspection at 669,350 km (06.02.2025), valid TÜV certificate until 28.02.2027. The truck is clean and fully operational! Price: € ex works Stockholm, Sweden. For further information and photos, please contact us by phone or e-mail. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * ----- * Shipping costs for this truck to various destinations * ----- * Stockholm (Sweden) – Gdańsk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixøs (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 ----- * These prices apply only when purchasing this truck. * ----- _____ Gedpeykmnusfx Abretu _____ Front axle: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Tire tread left: 90%; Tire tread right: 90%; Suspension: leaf suspension Rear axle 1: Tire size: 315/80/22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 90%; Tire tread left outer: 90%; Tire tread right inner: 90%; Tire tread right outer: 90%; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 9,000 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: air suspension Engine displacement: 12,777 cc Lifting capacity: 5,600 kg Upholstery: leather...

Condition: good (used), mileage: 594,709 km, power: 375 kW (509.86 HP), first registration: 04/2019, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,040 mm, total width: 2,550 mm, total height: 3,790 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, traction control, trailer coupling, - Digital tachograph - Tachograph (control device) - Fixed - Globetrotter - PTO (power take-off) - Pump - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Curb weight: 11,580 kg, Gross weight: 30,000 kg, Total tank capacity: 405 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of differential locks: 1, Cab type: Globetrotter, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Number of airbags: 1, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Engine power: 375 kW (503 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission brand: Volvo, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, System length: 570 cm, Pump, Hooklift height: 148, Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, MULTILIFT 20S59 / 6X2 LAST AXLE STEERING / REAR STEERING AXLE / ASSE STERZANTE Transmission Transmission: VOL, 12 gears, automatic Axle configuration Brakes: disc brakes Axle 1: Tyre size: 385/55R22.5; Steered; Left tyre tread: 7 mm; Right tyre tread: 10 mm; Suspension: leaf spring Axle 2: Tyre size: 315/70R22.5; Double wheels; Left inner tyre tread: 7 mm; Left outer tyre tread: 6 mm; Right inner tyre tread: 5 mm; Right outer tyre tread: 5 mm; Suspension: air suspension Axle 3: Tyre size: 385/55R22.5; Lift axle; Steered; Left tyre tread: 4 mm; Right tyre tread: 12 mm; Suspension: air suspension Weights Empty weight: 11,580 kg Payload: 18,420 kg Gross vehicle weight: 30,000 kg Functional Loading height: 120 cm Pump: Yes Maintenance APK (roadworthiness inspection): valid until 11.2026 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 3 Financial information Leasing price: €1,010 per month (default, 60 months); Ask for further information and terms Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent used vehicle traders. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from a wide range of model years and price classes. Why buy at Kleyn Trucks? Simple! Godpfxoyiy Ede Abretu • Large, rapidly changing inventory • Recognizable quality • Good price • Professional conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more…. Please visit our website for special offers and the full inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask us directly...

Condition: used, Year of construction: 2019, Mazak Quick Turn 200MB Control: Mazatrol Smooth G Year of manufacture: 2019 Turning length: 500 mm Maximum swing: 695 mm Maximum machining diameter: 380 mm Maximum machining length: 541 mm Chuck size: 8" X-axis: 234 mm Z-axis: 625 mm Main spindle: - Power: 26 kW - Max spindle speed: 5,000 rpm - Spindle nose: A2-6 Gtodpoyi Ttzofx Abreu - Spindle bore: 76 mm - Max bar diameter through spindle: 65 mm Turret: - 12 tool positions (VDI type) - 12 driven positions - Milling drive power: 5.5 kW - Max speed: 5,000 rpm - Interface for bar feeder - Through-spindle coolant pressure up to 15 bar - Automatic part catcher The machine is in very good condition, includes standard tools and driven tools. Serviced 2026-01-12. Year of manufacture: 2019 * Max spindle speed: 5,000 rpm * Spindle nose: A2-6 * Spindle bore: 76 mm * Milling drive power: 5.5 kW * Max speed: 5,000 rpm Turning length: 500 mm X-axis: 234 mm Chuck size: 8" * Power: 26 kW Z-axis: 625 mm

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min Godpfx Abjykavxorotu The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, CFS-ScanBrine brine mixing station consisting of 3x 500 ltr stainless steel double jacked tanks that can be cooled down whit central cooling system. Year of production 2005. Gjdpeyka Riofx Abretu

Condition: good (used), Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker Gjdeyik H Aopfx Abrjtu -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. Godpfxeyiz T Nj Abrotu During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series 0i-MC, table width: 500 mm, table length: 500 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This Leadwell LCH-500 Horizontal Machine Center was built in the year 2006. It is equipped with a Fanuc Series 0i-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm and is in good condition. Additional equipment • Chip conveyor Machine Benefits Qualitative Machine Benefits • Good condition Technical Machine Benefits • Distance table-spindle nose 50-660 mm Gtedpfx Asyi Elvjbrsu • Iso 40 spindle connection • Tool magazine 40 positions • Coolant pressure 20 bar

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length Gtjdpfx Asq Ikgksbreu 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: good (used), Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Gtjdpfxsx Nap Do Abreu

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Gtsdpfx Aex Twb Ssbreu

Year of construction: 2004, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Gtedpoyibxvjfx Abrju Automatic positioning of the length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Pneumatic material support with lift-up Minimum quantity spray device operation manual Weight: 1400 kg

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Gjdpfoxx A D Tjx Abrstu

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, controller manufacturer: HEIDENHAIN, controller model: TNC 530, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. Gsdpfx Abeyir Dxsrotu • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Gsdpfxou T H Dxo Abretu Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 03/2027, total length: 550 mm, total width: 550 mm, total height: 1,100 mm, input frequency: 50 Hz, year of last overhaul: 2026, TOP Semmelmühle Breadcrumb Machine Grating Machine Simple, robust technology Output: 300 kg/h Gtjdpfov N Tb Uex Abrju Stainless steel hopper Connection: 400V, 16A-CEE plug Dimensions: 550 x 550 x 1100 mm (W x D x H) Used machine, cleaned and tested With warranty and spare parts service Option: coarse sieve delivery service service package commissioning & instruction Many more TOP bakery machines in stock!

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Gedjyi T H Ijpfx Abrstu Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Gtedpfx Aoyi T Aisbrou Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: excellent (used), Year of construction: 2004, operating hours: 96,830 h, clamping force: 1,200 kN, screw diameter: 40 mm, injection pressure: 1,300 bar, injection weight: 231 g, Engel Victory 500/120 Tech (145) without hopper General information Product Code: 145 Availability: In Stock Year of production: 2004 Brand: Engel Technical data Shot Weight: 231 g Clamping Force: 1,200 kN Screw dia: 40 mm Injection pressure: 1300(2020) bar Tie bar distance: Tie-bar less Platen size: 740 x 680 mm Type of controls: CC200 Language: German Power: 41 kW Workinghours: 96830 h Gsdpfx Abjvt Sbberotu Weight: 7400 kg Dimensions: 5 x 1,7 m Hopper: No Core pull: Yes Euromap: Yes

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 855 mm, total height: 2,125 mm, Bakery blast freezer Gram model: SF500 G S RA L2 25B for up to 20 trays 600 x 400 mm Digital temperature display from +10 to -30°C Energy saving system EHT Deep freezer, ready to plug in with 10 pairs of tray rails Freezer with refrigerant R 290 A Connection: 230V Dimensions: 600 x 855 x 2125 mm (W x D x H) Used unit, cleaned with warranty & spare parts service Many more refrigeration units in stock! Gjdpfx Abowyruaerotu

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty Gedpfx Aboyg E Aioretu DELIVERY TIME APPROX. 4 MONTHS

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed Gtedeyg Ezlspfx Abrsu adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU