Used Mdf for sale (218)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Gbsdpfxjtk It Se Al Uju Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Gbedpjzf N Ncsfx Al Ueu Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Year of construction: 2022, functionality: fully functional, Largest Flatbed Cutter SUMMA F3232, year 2022 for sale! Availability in January 2027. Gedezuvzdjpfx Al Ujbu Materials that work with the F3232: Textiles & soft signage, Wide-format banners & mesh, Vinyl & protective films, Large-format corrugated & carton, Industrial composites & synthetics, Wood & MDF, Foam, rubber & technical materials. Working area: 327 × 320 cm Dimensions: 422 × 422 × 122 cm Material width: up to 332 cm Vacuum: 2 × 2.2 kW (50 Hz) Vacuum zones: 14 (2 rows × 7 columns) Speed: up to 1000 mm/s Acceleration: up to 1 G Power requirements: 3 × 400 V + N, 50 Hz, max 20 A INCLUDED (the machine comes with): ✓ Vacuum system ✓ Conveyor system ✓ Integrated Safety System ✓ Optical Camera System ✓ ADC Tool Calibration (Right + Left) ✓ GoProduce ✓ GoProduce Pro Pack ✓ GoProduce Upgrade License Not included: Tangential module 2 pcs., Pneumatic Oscillating Tool - POT, Router module.

Condition: used, Year of construction: 2026, CORMAK TS250CL Table Saw The TS250CL is a high-quality table saw designed for professional users who require reliability, precision, and a compact machine design. The saw combines advanced technical solutions found in higher-class models with an accessible and practical format. It is an excellent choice for small woodworking workshops, furniture production, and craft applications, providing high cutting efficiency and excellent machining quality. Main Advantages of the Machine Maximum blade diameter of 254 mm – enables deep cuts at various angles. 2.2 kW (S1) / 3.1 kW (S6) motor – provides constant power even during intensive operation. Blade tilt adjustment from 90° to 45° – allows precise bevel and angled cuts. Compact construction – allows optimal use of limited workshop space. Stable and extended work table up to 1000 mm in length – ensures accurate material guidance. Efficient dust extraction system with 100/25 mm outlets – improves cleanliness and operator comfort. Construction and Technology The TS250CL table saw is built on a robust welded frame that provides excellent rigidity and resistance to vibration. The main mechanical components are manufactured from high-quality steel and cast iron, ensuring durability and long service life. The heart of the machine is a powerful induction motor with a continuous operating power of 2.2 kW (S1), supported by an increased power mode of 3.1 kW (S6), allowing efficient cutting of hard wood species and wood-based materials. The installed 254 mm carbide-tipped saw blade enables effective cutting with a maximum depth of 80 mm at 90° and 65 mm at 45°, meeting the requirements of most woodworking operations. The blade speed of 4000 rpm ensures clean and accurate cutting lines. Precision and Working Efficiency The combination of a rigid construction and a precise blade guidance system allows the TS250CL table saw to deliver repeatable and accurate results. Thanks to the possibility of extending the work table to a length of 1000 mm, large workpieces can be guided comfortably and safely. Applications The CORMAK TS250CL table saw is an excellent solution for: Woodworking workshops – for cutting solid wood, MDF boards, plywood, and laminates. Furniture manufacturers – where dimensional accuracy and high surface quality are essential. Craft workshops – as a versatile and compact table saw for professional use. Standard Equipment Circular saw blade 250 × 30 × 2 mm Work table extension Dust extraction outlets 100/25 mm Stops and guards ensuring safe operation Optional Equipment Parallel guide system Crosscut sliding carriage for repetitive cutting Dedicated dust extraction system Technical Specifications Parameter Specification Maximum blade diameter / bore 254 × 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 65 mm Maximum cutting depth at 90° 80 mm Gsdpfoz E Hm Aex Al Uebu Cutting width with table extension 750 mm Maximum cutting length 1000 mm Dust extraction outlet 100/25 mm Work table dimensions 635 × 420 mm Work table dimensions with extension 635 × 1500 mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450 × 1000 × 1100 mm Please note!!! This is a display model and shows visible signs of assembly. No warranty and no returns.

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Gbedpfx Aljzkmqbe Uou Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Condition: used, Used Italpresse UT/6 hot press for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Gsdpfxezkt Tis Al Usbu Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Option to exclude 2 lateral cylinders from the control panel. Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Machine complies with CE standards.

Condition: excellent (used), LAMINATING LINE for panels (particleboards, MDF, HDF) Minimum/maximum panel dimensions: mm 600-1550 (width) x mm 1854-3660 (length) Minimum/maximum panel thickness: PB/MDF mm 8 - 44 (standard mm 16-19-22) // HDF mm 2,5 - 8 Adjustable working speed: m/min 8 - 29 Minimum/maximum working cycle (Feeder and Stacker): 6 cycles/min - 10 cycles/min 01) "KONTRA" Loading station (with stack chain conveyor, 2 Lifting platforms, Feeding station) 02) "KONTRA" Roller conveyor with length guide rail 03) "KONTRA" 1 Vacuum transporter + 1 Stack chain conveyor for protection boards 04) HYMMEN LAMINATING SYSTEM a. "HYMMEN" Mod. FRB (Cleaning Machine) b. "HYMMEN" Mod. GLK-V (Smoothing Calender to uniform the workpieces surface) c. "HYMMEN" Mod. TLA (Glue spreading machine) d. "HYMMEN" Mod. TRC (Conveyor) e. "HYMMEN" Mod. ADZ (Evaporation / Flashing-off Zone) f. "HYMMEN" Mod. KKL (Laminating Calender) Gjdpfozxrgwox Al Usbu g. "HYMMEN" Mod. DSS (Double-belt continous press) h. "HYMMEN" Mod. PWG (Pressing conveyoring rollers) i. "HYMMEN" Mod. FAA (Foil Unwinding Station) j. "HYMMEN" Mod. GLK (Final Calender) 05) "KONTRA" 1 Speed-up roller conveyor with length guide rails on both sides and pusher 06) "KONTRA" Unloading station 07) "KONTRA" 1 Protection board magazine

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Gbedpfx Aezuzg Sel Uou Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Gbedpfx Aljq Ii Dlo Uju Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Year of construction: 2021, condition: used, Multi-blade saw CAN CUT MC 930 Year of manufacture: 2021 Technical specifications Cutting width: 1,100 mm Max. cutting height: 50 mm Min. workpiece length: 650 mm Feed rate: 5-20 m/min Feed motor: 0.75 kW, 1,410 rpm Max. power consumption: 22 kW, 380 V Motor power: 30 hp Max. saw blade diameter: 250 mm Saw arbor diameter: 70 mm Gbsdezu St Aspfx Al Uou Saw blade speed: 3,500 rpm Max. number of saw blades: 15 pieces Working height: 900 mm Sound pressure level: 80 dB Automatic transport rollers: 3 pieces Rubber rollers between the saw blades to reduce vibrations when cutting MDF boards and wood.

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NCG3021L(LL) is a high-performance CNC nesting machining center engineered for automatic cutting, drilling, grooving, and part labeling, all within a fully integrated and automated workflow. This model incorporates automated loading, unloading, and labeling systems, delivering comprehensive automation, intelligent operation, and IT-driven production efficiency. Its open software interface enables seamless connectivity with furniture design suites and ERP platforms, ensuring fully optimized and data-driven panel processing. The professional FCC optimization software enhances cutting efficiency, minimizes material waste, and facilitates streamlined production management. This machine represents an ideal solution for advanced furniture manufacturing by reducing labor expenses while maintaining high standards of precision and productivity. Key Features Gbsdpexcwnbefx Al Usu - Automatic loading and unloading system equipped with a 3-ton lift table, pre-push device, and safety curtains for efficient material handling. - Rotary labeling system with integrated Honeywell printer, facilitating simultaneous labeling and machining operations. - Robust vacuum worktable (3100×2150 mm) segmented into 10 independently controlled zones, guaranteeing powerful and uniform vacuum suction. - Dual 7.5 kW oil-cooled vacuum pumps deliver maximum suction power at low noise levels. - High-rigidity gantry frame ensures enduring precision and operational stability at high processing speeds. - Italian-made 12 kW main spindle (HSK-63F, ATC, 24,000 rpm), featuring internal and external air blast for optimal dust extraction. - 12-position automatic tool changer (ATC) enables rapid tool changes, supporting a wide range of complex machining tasks. - 21-spindle drilling block designed for precise vertical and horizontal drilling operations. - Automated lubrication system minimizes maintenance needs and prolongs component life cycle. - Advanced dust extraction system with front and rear collection points maintains a clean working environment. - Comprehensive safety design includes a protective fencing system and optional optical barrier for maximum operator security. - User-friendly SYNTEC CNC control system compatible with MPR, DXF, TCN, and standard NC file formats. Technical Specifications - Working area: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Worktable height: 1010 mm - Maximum traverse speed: X/Y axes 70 m/min, Z axis 20 m/min - Main spindle: 12 kW, HSK-63F, 24,000 rpm - Tool changer: 12-position servo-driven ATC - Drilling block: 21 vertical spindles, 2.5 kW, 4000 rpm, max drilling diameter 35 mm - Vacuum pump capacity: 2 × 7.5 kW, 250 m³/h - Total installed power: 47 kW - Machine dimensions: 13,800 × 3,950 × 2,600 mm - Weight: 6,000 kg - Power supply: 380V / 50Hz / 3-phase Applications - Panel furniture manufacturing (kitchen cabinets, wardrobes, office furniture) - Nesting-based cutting and drilling of MDF, particleboard, and plywood - Automated production lines with integrated labeling for Industry 4.0 smart factories Advantages - Complete solution: automated loading, nesting, drilling, grooving, labeling, and unloading in a single workflow. - Outstanding efficiency: optimized software paired with dual synchronized gantries doubles processing throughput. - Labor saving: minimal operator involvement required. - Ideal for large-scale production: stable operation, precise machining, and consistently superior product quality.

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free. Godpfx Aezi Hpusl Uebu

Condition: good (used), Code: 0040 Gbedpfev Am Ibox Al Usu Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Gbedpfsvwbp Aex Al Uou

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Gbodpfx Ajyhhx Aol Uju Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: used, power: 185 kW (251.53 HP), gearing type: automatic, fuel type: diesel, first registration: 01/2017, emission class: euro4, The Forus SE 250 (2017) is a powerful two-shaft pre-shredder, specially designed for processing various materials such as household waste, commercial waste, waste wood, green cuttings, electronic scrap, film, and paper. With its robust design and versatile equipment, it is ideal for use in recycling companies, composting plants, and by agricultural contractors. Technical data: Drive: Diesel engine: Volvo TAD8, 185 kW (251 HP), EU Stage IV Alternatively: Electric motor with 132 kW Shredding unit: Two rotors with a diameter of 570 mm Multifunctional unit (asynchronous) or triangle blades (synchronous) Number of blades: 65 (multifunctional) or 40 or 80 (triangle blades) Rotor speed: 5–30 rpm (multifunctional) or 14–26 rpm (triangle blades) Throughput (depending on material): Household waste: up to 25 t/h Waste wood: up to 20 t/h Commercial waste: up to 12 t/h Green cuttings: up to 15 t/h Biomass: up to 50 t/h Final grain sizes: 150–500 mm, depending on selected breaker bar Dimensions: Working position (L×W×H): 10,000 × 2,500 × 3,300 mm Transport position (L×W×H): 7,800 × 2,500 × 2,500 mm Weight: approx. 15,000 Equipment & options: Hydraulically raisable and lowerable overband magnet Hydraulically adjustable breaker bar (type A1–A4) Radio remote control for all functions Large loading hopper for easy filling Galvanized conveyor frame Optional: crawler chassis Areas of application: The Forus SE 250 is excellent for: Shredding household and commercial waste Processing waste wood, chipboard, and MDF boards Composting green cuttings and rootstocks Preparation of biomass for energy production Recycling of electronic waste, film, and paper Gbjdpfjwqqyvsx Al Usu

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Godpfxovvi I Re Al Uebu

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Gjdpfx Aljy D E Tdj Ujbu

Year of construction: 2022, condition: excellent (used), Manufacturer / Model Voorwood L115M (H) with return conveyor Machine Type: Edge Foiling / Profiling / Sanding / Grooving Line with Return Conveyor Overview High-production edge finishing machine capable of profiling, sanding, grooving and applying decorative foil to panel edges and drawer side groove in a single pass. Includes return conveyor system for continuous single-operator workflow. Key Features - Single-pass shaping, sanding, and foil application - Up to ~8,000 lineal feet per shift - Return conveyor system for continuous production - Bottom feed chain with non-marking pads - Digital readouts for fast setup - PLC touchscreen controls - Temperature-controlled foil application with auto disengage Conveyor System - Receiving rollers: 5–100 FPM - Transfer belts: 115 FPM - Return rollers: 90 FPM - Adjustable working height: 29”–40” - Handles material up to 2½” thick - Independent motors for receiving and return Godeyvcw Ajpfx Al Usbu Machining Stations Shaping: 5 HP motor, adjustable spindle Sanding: precision sanding spindle Foiling: 8” wheel, temperature controlled, auto tension Grooving saw: 8” blade, 3 HP motor Capacity - Feed speed: 2.4 – 10.7 m/min - Thickness: 3 – 51 mm - Minimum part size: 76 × 76 mm Utilities - 3-phase power - Dust extraction: 3 × 127 mm ports - Approx. 400 CFM required Ideal For - Drawer sides - Cabinet manufacturing - MDF edge finishing - High-volume production

Condition: good (used), Code: 0453 Brand: OSAMA Model: S 2 R 1000 - CE Standard Automatic 2 rollers glue spreader for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard NEW grinded roller Working width 1000 mm Gbedpfoznkybjx Al Uju Working height 100 mm Roller diameter 185 mm Feed speed 18 mT/min Motor power 0,5 Hp Work surface height 800 mm Overall dimensions mm 1700 x 780 x 1350 h Weight kg 270

Condition: used, Year of construction: 2016, Laminate Coating System Manufacturer: Type: Master PUR-1400 Year of manufacture: 2016 Technical data Professional PUR hot-melt laminating system for acrylic, PET, PVC, HPL, and CPL sheets General description The MASTER PUR-1400 is a professional, high-performance laminating system designed for single-sided lamination of sheets with PUR hot-melt adhesive. The system is suitable for continuous industrial production and offers excellent surface quality with low adhesive consumption. It is designed for the production of high-quality furniture panels, interior design components, wall panels, and decorative panels. Suitable substrates The machine is suitable for laminating: MDF Chipboard Plywood PVC sheets Gypsum boards Other wood-based panels Compatible surface materials The system is designed for processing the following materials: Acrylic sheets (high gloss & super matte) PET film PVC film HPL laminate CPL laminate Decorative paper Technical data Working width: 1,400 mm Maximum sheet size: 2,800 x 1,300 mm Gsdpfxszuzkqe Al Usbu Sheet thickness: 2-40 mm Production speed: 5-17 m/min Throughput: 3-5 sheets/min Maximum productivity: up to approx. 1,200 sheets per 8-hour shift Installed motor power: 21.49 kW Heating power: 51.7 kW Overall dimensions of the machine: approx. 16 x 2.5 x 2 m Required installation area: at least 6 x 22 m System configuration The production line includes: Automatic feeding system with roller conveyor Brush cleaning system for sheets Infrared preheating oven (IR) 3-roller PUR adhesive application system Feeding station for decorative material Laminating press with pressure rollers Take-away conveyor 208-liter melting tank for PUR hot-melt adhesive Advantages Excellent laminating quality Uniform PUR adhesive application Suitable for high-gloss and super-matte acrylic surfaces Low adhesive consumption Stable and reliable operation in industrial series production High production efficiency Easy operation and maintenance Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, CORMAK PS12E-2000 Panel Saw with Scoring Unit The CORMAK PS12E-2000 panel saw with scoring unit is a solid and precise woodworking machine designed for cutting furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its dual cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without chipping or splintering, which is essential in furniture production and interior finishing applications. Main Advantages of the Machine Dual cutting system: main blade + scoring blade – eliminates the risk of laminate tearing and ensures clean edges. Stable cast iron worktable – provides precision and rigidity even under heavy loads. Large 2000 mm sliding table – designed for cutting large-size workpieces. Powerful 3.8 kW (400V) motor – enables effortless cutting of even hard materials. Adjustable cutting angle up to 45° – allows precise bevel cuts without loss of accuracy. Precision side fence – equipped with an accurate scale for repetitive cutting operations. Dust extraction system – efficient removal of sawdust improves cleanliness and workplace safety. Complete standard equipment – includes scoring blade, measuring guides, blade guard, angle indicator, and accessories. Construction and Technology The construction of the CORMAK PS12E-2000 panel saw is based on a precision-ground cast iron table and a bearing-mounted sliding table with support, ensuring stability and full control over the material during cutting. High-quality guide rails provide smooth and accurate table movement, while the reinforced machine body minimizes vibrations. The ergonomic front-mounted control panel allows convenient adjustment of cutting height and blade angle. The blades are driven by a 3.8 kW motor, providing sufficient power reserve for demanding applications and difficult-to-cut materials. Precision and Work Efficiency The CORMAK PS12E-2000 panel saw with scoring unit has been designed for high repeatability and accuracy. Cutting depth and angle adjustments are carried out using locking adjustment knobs, increasing both safety and operator comfort. High blade speeds, including up to 5800 rpm for the scoring blade, enable fast and clean cuts without burning or damaging the material surface. Applications This panel saw is designed for: Professional woodworking workshops Furniture manufacturing companies Custom woodworking businesses Prototype production departments It is ideal for daily production, dimension cutting, and complex projects requiring precise angled cuts. It is the perfect solution wherever cutting accuracy, edge quality, and reliability are essential. Standard Equipment Main cutting blade Scoring blade Godsvuf Tmepfx Al Uobu Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade angle indicator Eccentric clamp User manual EC Declaration of Conformity Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width on right side 1260 mm Saw blade tilt range 45° Cutting height at 45° 80 mm Cutting height with 315 mm blade at 90° 100 mm Cutting height with 300 mm blade at 90° 95 mm Maximum main blade size 315 × 30 mm Maximum scoring blade size 100 × 20 mm Main blade speed 4500 rpm Scoring blade speed 5800 rpm Motor power S1/S6 3.8 kW / 6.1 HP Power supply 3-phase, 400V Weight 275 kg Warranty 12 months Technical documentation (DTR) Included CE Declaration Yes

Condition: excellent (used), Year of construction: 2025, ♻ Universal use (various wood, pallets with nails, chipboard boards, waste and scrap, veneer, MDF boards, cardboard boxes, plastics, textiles, tires, etc.). Godpon Nwxfefx Al Usbu ✔ Power: 55 kW ✔ Shaft length: 1400 mm ✔ Shaft diameter: 315 mm ✔ Shaft RPM: adjustable ✔ Number of cutting knives: 60 ✔ Granulation: 15-90 mm ✔ Capacity: up to 17 m3/h* ✔ Filling opening: 1400 x 1800 mm ✔ Dimensions L/W/H: 2,20/3,10/2,80 m ✔ Weight: 7000 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2026, The CORMAK PS12E-1600 panel saw with scoring unit is a solid and precise panel saw designed for working with furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its two-axis cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without tear-out or chipping, which is crucial in the production of furniture and finishing elements. Main Advantages of the Machine Dual cutting system: main blade + scoring blade eliminate the risk of laminate delamination. Stable cast-iron worktable: ensures precision and rigidity even under heavy loads. Large 1600 mm sliding table: designed for cutting large-format components. High-performance 3.8 kW (400 V) motor: enables effortless cutting of even hard materials. Adjustable cutting angle up to 45°: allows angled cuts without compromising accuracy. Precision side fence: equipped with an accurate scale for repetitive cutting. Dust extraction: effectively removes dust and keeps the workstation clean. Complete standard equipment: includes, among other things, a scoring blade, measuring fences, blade guard, and tilt indicator. Construction and Technology The construction of the saw is based on a ground cast-iron worktable and a bearing-mounted sliding table with a support, ensuring stability and full control over the material during cutting. High-quality guides enable smooth movement, while the reinforced body construction eliminates vibrations. The control panel, ergonomically positioned at the front of the machine, provides convenient adjustment of the cutting height and cutting angle. The blades are driven by a 3.8 kW motor, which provides a substantial power reserve when processing difficult materials. Precision and Work Efficiency The CORMAK PS12E-1600 table saw with scoring unit has been designed with high repeatability and accuracy in mind. The cutting depth and angle are adjusted using lockable adjustment knobs, which increases safety and operating comfort. The high rotational speed of the saw blades (up to 5800 rpm for the scoring blade) enables fast and clean cuts without causing a burning effect on the material. Standard Equipment Saw blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade tilt indicator Eccentric clamp Polish-language manual EC Declaration of Conformity Optional Equipment Saw blades with different diameters and tooth configurations Trolleys for large-format materials Dust extraction systems Side and rear table extensions Technical Data: Sliding table length [mm] 1600 Cutting width on the right-hand side [mm] 1260 Saw blade tilt [°] 45 Cutting height at 45° [mm] 80 Cutting height with 315 mm circular saw blade installed at 90° [mm] 100 Cutting height with 300 mm circular saw blade installed at 90° [mm] 95 Maximum saw blade dimensions [mm] 315 x 30 Maximum scoring blade dimensions [mm] 100 x 20 Main saw blade speed [U/min] 4500 Scoring blade speed [U/min] 5800 Motor power [S1/S6] 3.8 kW / 6.1 HP Power supply 3 phases, 400 V Gbjdpfx Aovuf Uqjl Usu Weight [kg] 275 Warranty [months] 12 Manual (DTR) YES CE Declaration YES

Condition: new, CATALOGUE NUMBER M0252 PRODUCT FEATURES Main machine features: - Single-head drilling machine for drilling in the range of 0 - 90° - Pneumatically adjustable head tilt angle - Side guides can be set with an accuracy of up to 0.1 mm - Securing clamps allow for quick panel positioning without adjustment - Spindles adapted for quick-release couplings - Patented pneumatic material clamping system - Work table made of MDF - Quick and precise adjustment - Precise drilling - Made in Italy Gbsdpfszr I Hysx Al Uju Standard machine equipment: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stops - 5 quick-release couplings - Wooden crate for protecting the machine during transport ADVANTAGES - Vertical/horizontal/angled drilling - Multi-spindle - New machine - CE certified - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill: 704 mm - Distance between the centers of individual spindles: 32 mm - Maximum workpiece size: 950x3000 mm - Maximum workpiece thickness: 60 mm - Maximum drilling depth: 65 mm - Number of pneumatic clamps: 2 - Operating pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19500 PLN Net price: 4640 EUR Net price calculated based on the exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)