Hot Press - TIGER TM B6

Tiger TM6B

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Prodpfxjmgc I Nj Agzof Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: used, Year of construction: 2000, Weinig Unimat 23E planer and moulder for four-sided planing and profiling of wood, with a mobile spindle for automatic adjustment and a grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long planing table. Included: Set of grooved bed cutters Optional: Conversion to a conventional smooth table, available upon request. spindles: 5 spindle 1: Bottom / 40 mm / 5.5 kW Prsdewztw Sspfx Agzsf spindle 2: Right / 40 mm / 7.5 kW spindle 3: Left / 40 mm / Common motor with spindle 2 spindle 4: Top / 40 mm / 7.5 kW spindle 5: Bottom / 40 mm / 5.5 kW working width: 230 mm working height: 160 mm

Condition: reconditioned (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 7867/162, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds spindle not tiltable Prodpfx Aoh Ux Rwogzjf LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information.

Condition: excellent (used), functionality: fully functional, Brief description Table dimensions: 3000 mm x 1300 mm Prodpfxoxvx Ezo Agzjf Number of cylinders: 6 Pressing force: 90 tons Table opening: 400 mm Heating with hot water Boiler: 20,000 kcal/h

Year of construction: 1998, condition: excellent (used), I sell the window profiling automat centre Weinig Univar 10 Predpfjfzzhrjx Agzof Year 1998. Moulding heads OERTLI. Available immediately. Unit price 8.500 euro. 4 pcs. available. Condition very good !

Condition: used, Circulation machine WEINIG UNIVAR 10 as a spare parts carrier from a UC-Matic window system. * Year of construction: 1997 * Sutron BT20 control * Machine incomplete Pedpolf H Sqefx Agzjrf * Details on request * Illustration similar.

Condition: used, Mechanisation by Weinig, feed speed up to 43 m/min. Pjdpfxsxg Sate Agzorf

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 will be sold on behalf of our customer, ex location ----- Prsdpfxew I Eawj Agzof Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip e...

Condition: good (used), working width 230mm working height 120mm spindle diameter 40mm 4 heads + unit for cutting glazing bead control from ATS panel head adjustment in two axes Prsdpfx Agsvtt Ayjzef electric adjustment of the pressure beam smooth adjustment of feed speed The machine worked in line with other machines.

Condition: used, Planer and edge finishing machine Weinig Profimat 23 E for four-sided planing and profiling of wood with movable spindle. spindle: 5 spindle 1: Bottom / 5.5 kW / 40 mm spindle 2: Right / 5.5 kW / 40 mm spindle 3: Left / shared motor with #2 / 40 mm spindle 4: Top / 7.5kW / 40 mm Predpex Ecgujfx Agzsf spindle 5: Bottom / 4 kW / 40 mm working width: 230 mm working height: 120 mm