Used Measuring Projector for sale (6,349)

Condition: good (used), External measuring device STUDENROTH Bü-Fix, with measuring probe HEIDENHAIN MT25B, including digital display HEIDENHAIN. Iedpfxoztdbie Acqoba

Condition: good (used), Year of construction: 2013, Coordinate measuring machine HEXAGON Optiv Classic 321 GL, serial number 6K012-3, with computer DELL Precision T3500, Intel Xeon processor, TESA Bugnon 38 remote control, purchased in 2013, last calibration 09/2017. Isdpfx Ajztc A Secqsba

Condition: new, Year of construction: 2026, Length measuring device ASB ----- - Freely selectable setpoint - Switchover from absolute to relative measurement - Easy readability thanks to digital display - Automatic display shut-off - Low installation effort Technical data Iodpfxozr U Nbs Acqsba Length measuring device ASB Measuring range: ASB: 1,000 mm - 6,000 mm Accuracy: +/- 0.1 mm over 3,000 mm Resolution: ± 0.01 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 65 mm, workpiece length (max.): 2,500 mm, workpiece height (max.): 65 mm, workpiece width (max.): 1,000 mm, Equipment: documentation/manual, Stock machine – subject to prior sale! Tactile 3-axis measuring table for fast and precise measurement of flat workpieces. Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15” touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution 0.01 mm Ibjdpfx Aezr Ud Secqja Measurement: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Angularity ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Borehole diameter ⦁ Borehole depth (relative) ⦁ Radii / diameter ⦁ Groove position ⦁ Groove depth (relative) ⦁ Fold position ⦁ Fold depth (relative) ⦁ X/Y/Z position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g. rectangle, parallelogram, or trapezoid) Procedure: 8 points of the workpiece are scanned (two points each on every line at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angle Protocol: When target values and tolerance specifications are entered, a target/actual comparison is created with deviations and displayed in a table. Storage of the measurement results as a PDF (protocol) or in an SQL database for statistical analysis. Inspection and documentation of the manufacturing status in the production process, after cutting, after edging or after drilling the workpieces, depending on the value-added process. Vacuum system (Venturi principle) 6 vacuum suction cups integrated in the measuring field fix the workpiece during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/Control 17” Touchscreen HECHT DesQ II software Windows 11

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Demonstration machine – subject to prior sale - Operating system: Windows 11 For measuring external dimensions and performing one-sided inspections of vertical and horizontal boreholes in plate-shaped workpieces. APPLICATION AREA: Tooling aid: Measurement of the first production part Sample inspection: Measurement of samples MEASUREMENT CRITERIA: Dimensions: Length, width, angle Borehole, vertical: Position, diameter, depth, borehole spacing Borehole, horizontal: Position, diameter, depth, distance to the top of the plate. (NOTE: Test pins or inserted dowels are required). Groove: Edge distance, width, depth Radius: Center point position, radius Flange: Width, depth Recesses: Width, edge distance Ijdpozr Udrofx Acqsba Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: the measurement of vertical and/or horizontal boreholes as well as grooves and flanges on the Y-axis is possible up to the position 1,150 mm) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/- 0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy - independent of daylight) Measuring plane: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor: approx. 1,000 mm +/- 50 mm Space required approx. L/W/H: approx. 5,000 mm / 2,000 mm / 1,700 mm Weight approx.: 2,400 kg + control cabinet including control panel approx. 200 kg Total electrical connection: 2500 W Compressed air connection: 6 bar Operating side: left Operating voltage: 230 V / 16 A – (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: At higher temperatures, an air conditioning unit in the control cabinet is recommended – available as an option.) Subject to technical changes. The above performance data assumes that suitable workpieces are used. Scope of supply: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x Software license CAD4U and Hecht interface for creating measurement programs on a PC in the preparation area ⦁ 19" PC with CAD4U software license and interface for creating measurement programs, current software version Results and driver for measurement program execution, image processing software ⦁ Camera, lens and lighting for image acquisition ⦁ Operating system Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring the lateral boreholes: 10 pieces each with diameters 5, 6, 8 ⦁ 4 x right-angle brackets for black parts ⦁ SQL Express database installed on the machine computer Languages: The operating software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian and Chinese. Other languages available on request. SAFETY AND PROTECTION DEVICES EMERGENCY STOP switch All machines for EU member states with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be completely separated by a protective fence. This and other protective devices are not included in the scope of supply.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, type plate available, FARO Quantum M ScanArm 2.5 m with FAROBlu HD Laser Line Probe and MetrologyWorks Kodiak HDP-KCF heavy-duty tripod Complete portable 3D metrology system for tactile coordinate measurement and 3D scanning. System configuration: FARO Quantum M ScanArm Measuring range: 2.5 m 7-axis articulated measuring arm FARO LLP HD Laser Line Probe, Rev. 3.2 Tactile measurement probes and accessories MetrologyWorks Kodiak HDP-KCF heavy-duty carbon-fiber/aluminium tripod Isdpfx Aezt Dpyjcqjba Original FARO transport case Batteries, power supply and cables Mounting accessories Existing calibration documentation The system is suitable for dimensional inspection, CAD-to-part comparison, First Article Inspection (FAI), production control, tooling and fixture inspection, and reverse engineering. The measuring arm and scanner are fully functional and can be demonstrated under working conditions. Calibration information: Measuring arm: last calibration October 2024 LLP HD scanner: calibration date April 24, 2024 Scanner manufactured July 2019 A current recalibration is not included in the offer. The included MetrologyWorks Kodiak HDP-KCF is a professional heavy-duty metrology tripod designed for portable CMM arms and laser trackers. It features carbon-fiber/aluminium construction and a universal 3½"-8 mounting ring. Original technical documentation is available. Please note: The laptop and PolyWorks software shown in some pictures are not included in the sale. Inspection and live demonstration are possible by appointment in Gabčíkovo, Slovakia. EU-wide insured shipping can be arranged at the buyer’s expense. Personal collection is also possible. Price: EUR 24,900 net, negotiable.

Condition: used, Year of construction: 2010, 2010 Carl Zeiss CONTURA® G2 RDS Bridge Type CMM Axis Travel 'X'=700mm , 'Y'=1,000mm , 'Z'=600mm. Maximum Table Load 730kg. Volumetric Accuracy 1.7 + L/300µm. Table Dimension L1,050 x W827mm. Zeiss RDS Vast XXT Articulating Scanning Probe (2.5º increments). Distance Between Table And Probe Head 716mm. Ijdpozt Satefx Acqsba With Calibration Sphere, Joystick Control & 3 Position Probe Rack. Overall Weight 1,550kg.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC Coordinate Measuring Machine Prismo Mass VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm Iodpfx Acozr I R Eoqjba In technically and optically new condition The machine was located in a climate-controlled precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor technology 9-position probe changer magazine Reference probe Temperature probe Probe changer plate, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Curve module, QDAS converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Condition: good (used), HARTGESTEIN measuring and control plate Iodpfx Aszati Rscqsba DIN 876/1 with substructure Dimensions: Length: 800 mm Width: 600 mm Thickness: 120 mm Height with substructure: 890 mm Accuracy: DIN 876/1

Condition: like new (used), Year of construction: 2013, Technical specifications: Measuring range, X-axis: 700 mm Measuring range, Y-axis: 650 mm Measuring range, Z-axis: 500 mm Size of granite plate: 1330 x 962 mm Dimensions (width x depth x height): approx. 1400 x 1200 x 2450 mm Weight: approx. 800 kg Ibsdpfx Aszrfmwecqoa Condition: Condition is nearly new, very little used. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: GLAA000683IA, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, Shop-Floor package The Shop-Floor capability package ensures reliable results even in the challenging conditions of shop-floor environments. Advanced multi-sensor structural thermal compensation enables GLOBAL S to compensate for fluctuating temperatures (15-30 °C range) while covers and bellows provides a higher level of protection from dust and dirt. The package includes a selection of options ideal for shop-floor dimensional inspection workflows. The kit includes: • Advanced multi-sensor structural thermal compensation • Machine accuracy specifications in the Shop-Floor Temperature range 15-30 °C • Machine improved accuracy specifications in the Extended Temperature range 16-26 °C • Bellows and cover for the X axis and Y axis (left side). Accuracy: MPE (E0,MPE/ E150,MPE) = 1.5 + L/333 μm MPE (THP)/ MPE (τ)= 2.9/45 μm/seconds Measuring range: X = 500 mm; Y = 700 mm; Z = 500 mm; High speed: Max 3D speed: 500 mm/s Max 3D acceleration: 1700 mm/s2 DC241 Controller NJB Jog-Box PROBING CONFIGURATION HH-A-T2.5° Automatic Probe Head The HH-A-T2.5 is a ram mounted probe head that is capable of indexing in 2.5° increments and can achieve 12,240 unique positions. The head features a number of new innovations including an embedded controller and capacitive crash protection. Technical Specifications: • Indexable axis A (Roll): +105°, 2.5° index • Indexable axis B (Pitch): +180°, 2.5° index • Rotation Speed: 90° in 2.5 sec. • Max applied torque: 1.4 Nm • Probe Mounting: TKJ Kinematic Joint • Max. Extension bar: 450 mm HP-S-X1S Scanning Probe The HP-S-X1 supports all the standard probing modes like: Single Point Probing, Self-Centering as well as Continuous High Speed Scanning for fast and accurate form and profile measurements. The HP-S-X1S kit includes: HP-S-X1S scanning probe, Styli stet and the AC/DC probe interface. HP-S-X1S Technical Characteristics Ibodpfx Aozuk Acscqea • Probe Type: Analogue • Probe Dimension: Ø 30 mm x 109 mm • Styli Length Range: vertical: 20 - 115 mm; horizontal: up to 20 mm • Max. Styli Weight: 20 g (incl. styli clamping) • Styli holder Weight: 7 g or 8 g • Stylus Joint: M3 thread • Over Travel Range: ± 2 mm in all axes Ceramic Calibration Sphere: Ø 25 mm TOOL CHANGER HR-X1 Automatic Styli Changer Rack – HR-X-400 The HR-X1S / H styli changer is available from min. 3 ports to max. 9 ports. It allows a fast styli changes, in automatic mode, during the measuring cycle Standard version supplied with 3 ports - HP-X1-P-SF. Styli holder HP-S-X1S-1 (2 pieces) Styli holder HP-S-X1S-2 (1 piece) PC DELL 3630 Workstation Desk Extension PC-DMIS CAD++ EATON 9SX 2000 UPS

Condition: used, “functionally tested; item comes from the dismantling of equipment from an automotive supplier.” Available quantity: 20 units Manufacturer: BRS Messtechnik GmbH Type: BIM2 Function: Precise measuring module for force and torque measurement Supply voltage: 24 V DC Interface: Analog 0–10 V / 4–20 mA Ibedozlt Naspfx Acqoa Application: Test benches, machine monitoring, quality assurance

Condition: used, Quantity: More than 40 available Manufacturer: Indu-Sol Type: PNMA II PROFINET measuring device, version 3.0 (114090100) Mounting: 35 mm DIN rail Dimensions: 105 × 39 × 74 mm Weight: 310 g Input voltage: 24 V DC (20-28 V, reverse polarity protection) Output voltage: 24 V DC (max. 1 A) Current consumption: approx. 50 mA Ibjdpfozlt Hxox Acqsa Power dissipation: approx. 1 W Protection rating: IP20 Connector: RJ45 Delay: < 1 bit/s at 100 Mbit/s Cable length: up to 100 m (Cat5/Cat5E) Operating temperature: 0 °C to +70 °C Storage temperature: -15 °C to +75 °C Humidity: 10 – 90 %, non-condensing

Condition: good (used), !!! Now at a special price!!! Now at a special price!!! TECHNICAL DATA Foot size: 260 x 140 mm Measuring table surface: 200 x 140 mm Accuracy of the measuring surface: 0.002 mm, measuring height approx. 200 mm Ibodpfx Aed Hrk Tjcqsa Overhang: approx. 120 mm, column diameter: 35 mm Accessories: Natural stone/hard stone foot, accuracy class DIN876/000 Measuring probe: HELIUS Messtechnik, digital display (1-axis)

Condition: excellent (used), Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging Isdezk Daaopfx Acqjba -Type: MGS 1.25/2.75 -Item No.: 49189444 -Individual components: see photos -Cardboard dimensions: 290/220/60 mm -Weight: 1.1 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: 302-101-4, travel distance X-axis: 110 mm, travel distance Y-axis: 55 mm, total width: 500 mm, total length: 1,000 mm, space requirement height: 1,100 mm, overall weight: 120 kg, For sale is a profile projector from the manufacturer Mitutoyo, type PJ 300. The item is in good condition. Technical data: Device type / series: Vertical profile projector PJ-300H Code No.: 302-101-4 Serial number: 81636 Iodpfxjzl Sr Ts Acqsba Manufacturer: Mitutoyo Corporation Screen diameter (effective): Ø 300 mm Projection image: Side-correct, upright Angle scale / rotation: 360° rotatable screen, digital angle counter Angle resolution: 1' or 0.01° Crosshair: 90° solid lines Standard objective magnification: 10X (optionally expandable to 20X, 50X, 100X) Through-light illumination (contour): Halogen light source (24 V, 150 W) with integrated heat protection filter / Telecentric system Top-light illumination: Halogen light source (24 V, 150 W) for excellent detail visibility Brightness control: 2-stage for optimal adjustment to the workpiece XY-axis detection: Integrated digital display (XY counter) directly next to the screen for ergonomic operation Interfaces: Data output RS-232C (for connection to measuring software, e.g. QM-Data200 or PC) Power supply: 100 - 240 V AC, 50/60 Hz Power consumption: approx. 400 W Net weight: approx. 110 kg - 120 kg Dimensions (W x D x H): 677 mm x 646 mm x 1,004 mm On request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange is possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg Ijdpfjzbc Hhox Acqjba In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo 9/15/7 VAST GOLD Year of manufacture: 2000 Retrofit 2024, last DAkkS calibration 12/2021 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control system with BP26 operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR, 10-position VAST Probe changer plate, 8x VAST Reference probe Temperature probe Probe accessories Ijdpjzq U Rcofx Acqjba Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: Curve and QS-Stat Calypso upgrade and other options possible Further accessories and options available Available for immediate delivery

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Iodpfxezk I T Re Acqoba Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. Iedpou N Awvjfx Acqjba *

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, in very good condition, fully functional. Smoke-free environment, no damages. ✅ Technical Specifications: Magnification: 0.1× to 5,000× (current configuration up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8" CMOS Frame rate: up to 50 images/sec Depth of field: High depth of field even in live image Measurement functions: 2D and 3D measurements (angles, areas, volumes, roughness) Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg ✅ Special Features: Isdpfx Acsxtbpdsqjba Fully automatic image acquisition and measurement Observation from various angles without sample manipulation Creation of 3D images and surface scans Ideal for quality control, material analysis, research & development 📦 Scope of Delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g., VH-Z20T, VH-Z250T) Power supply and cables Original software 🚚 Shipping & Collection: Collection by prior arrangement

Condition: good (used), Height: 700 mm Ibodpfxozk Edgj Acqea Base area: 200 x 150 mm Weight: 39 kg

Condition: good (used), Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor Iedpfx Acozi D Twsqjba -Manufacturer: Mahr Feinprüf, Measuring Probes, Position Sensors, Displacement Sensors -Type: 1302 -Quantity: 1x measuring probe available -Box dimensions: 155/100/H35 mm -Weight: 0.3 kg

Condition: used, Year of construction: 1992, Measuring range, X-axis: 2400 mm Measuring range, Y-axis: 1200 mm Measuring range, Z-axis: 1500 mm Ibodpfeg Er Nlex Acqja Machine weight: approx. 9.00 t

Condition: used, Manufacturer: Mitutoyo Iodpfsy Nlu Eex Acqjba Model: PJ 3000