Used Meganet Table for sale (16,446)

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm - spindle locking - with a crosscut fence - with a side fence + protractor - crosscut fence length 3000mm - cutting width adjustable with an electric guide from the upper control panel, 1550mm Djdszrwbajpfx Ad Nock - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down adjustable from the upper control panel - angle adjustment adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - protractor - table extension 2000x1530mm - large blade guard - dust extraction nozzle diameter 100mm, 120mm - dimensions L/W/H 3600x3800x1600mm - weight approximately 1200kg Advantages: – Polish production – with a scoring saw – START/STOP switch in the crosscut table – pressure beam – original DTR documentation – unpainted – used saw, very good condition Net price: 29900 PLN Net price: 7120 EUR depending on the exchange rate of 4.20 EUR (Prices may change due to larger fluctuations)

Condition: good (used), Year of construction: 1985, overall weight: 2,500 kg, total length: 1,800 mm, total width: 1,200 mm, total height: 760 mm, table height: 760 mm, Box table ASQUITH - RDG MACH-ID 9757 Make: ASQUITH Type: RDG Year: 1985 Number of T slots: 10 (7+3) Jump from T to T: 240mm T size: 28mm Dcsdpfx Adozqmg Ne Nek Number of T-slotted sides:2 Length: 1800mm Width: 1200mm Height: 760mm Weight: 2500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, power: 4 kW (5.44 HP), cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,350 mm, total width: 1,800 mm, total height: 1,700 mm, overall weight: 800 kg, Equipment: saw blade guard, No. 3276 Sliding table saw Kölle K 45 Used Max. saw blade diameter 400 mm Max. cutting height 145 mm Cutting width 1250 mm Motor power 4 kW Speeds 2800 / 3600 rpm Manual saw blade tilt 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Cross-cut table length 800 mm, extendable to approx. 1200 mm Stop rail 2000 mm long, with 1 stop Adjustable overhead saw blade guard Dcjdpfx Ajzbu Evjd Nsk Transport dimensions approx. 2350 x 1800 x 1700 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73433 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF Djdpfjzq U Syex Ad Neck • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 1,100 mm, total length: 3,000 mm, total height: 720 mm, number of drawers: 3, This offer is for used high-quality designer office furniture in good condition. Delivered in 2023, the items are generally in very good condition due to minimal use. Monitored price as reference for 1x Vitra wire chair incl. cushion 6x Vitra wire chairs DKR + soft seats outdoor typ C -Poweder coated -Wire base in Basic Darf (smooth) -Glides fitted -Soft seats outdoor Tyoe C cushion -Non-slip coating on one side -Cover: Simmons 53 white / steel blue -Incl. original invoice new price 391,-€ each set -Price ex works 251,-€ each set 1x Johansen Design conference table incl. 9x Menu leather designer-chairs swing Table: -Discus Conference 300x110 cm -F5150 MAT American Walnut, clear-lacquered MDF -Madison T XL base, design by Alexander Lervik Dodpfjzqr Ifsx Ad Nsck 9x Chairs: -Menu Harbour Chair Star Base with Swivel Return (swivel chair with self-centering mechanism) -Upholstery Family: Dunes Sørensen Leather, Color 21000. -Incl. original invoice new price 14.648,-€ complete -Price ex works 8.310,-€ complete 1x set Vitra Bistro Table / High Table (EN 15372 Level 3) + Menu Chairs -Dimensions: Diameter 796 mm x 1100 mm -Round tabletop -Indoor base -Certified to EN 15372 Level 3 -incl 3x Menu Co Chair, bar chair -Incl. original invoice new price 1.131,-€ complete -Price ex works 579,-€ complete Prices may vary slightly depending on the quantity purchased. We would be happy to provide you with a tailored quote. You may also purchase individual pieces of furniture separately. Condition: This offer consists of used furniture, which may show signs of wear (such as minor scratches or yellowing). Packaging and Shipping: You are welcome to view the items during our business hours; please schedule an appointment to do so. Seaworthy packaging and worldwide shipping are available upon request. Please feel free to contact us directly for further information.

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 140 kg, NEW price includes delivery in the Netherlands and Belgium! Semi-electric scissor pallet truck Brand: Total Source Year of manufacture: 2025 Capacity: 1,000 kg Dcsdpfx Adjy R Aghs Njk Lifts to a height of 800 mm Manual drive Electric lift Equipped with a 12 V battery Internal charger Charging time = 20 hours for the first charge, then 8-10 hours for each subsequent charge Lifting speed = without load, lifting speed is 15 seconds; with load, lifting speed is 20 seconds Autonomy = it can lift and lower 80 times when fully charged.

Year of construction: 1980, condition: reconditioned (used), Universal swiveling and tilting table for MAHO MH 1000 Dcsdefx Aipopfx Ad Nok Clamping area: 1050 mm x 630 mm The universal swiveling and tilting table is in good condition!

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm Dcjdpfxjyyap Es Ad Nek • Vario drive 5.5 kW (7.5 hp) VAR

Condition: used, Year of construction: 2006, Motor-adjustable parallel guide; length stop with display; single-sided motorized tilting; sliding carriage, 3000 mm; 5.5 kW; scoring cutter; cutting width 1000 mm. Location: Nattheim. Dcjdpfx Aozawiusd Nsk

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA Dcedpszh Hv Ejfx Ad Nok - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. diameter of the main saw blade without scoring blade: 450mm - cutting height with installed 350mm blade: 100mm - electric adjustment of the main blade up/down + angle - electric angle display Dcsdpfxezh Izpo Ad Nsk - electric adjustment of the scoring blade up/down, left/right - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with the guide: 1300mm - with a side carriage - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 22mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 4 types of blade speed - electronic speed display - dust extraction port diameter: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES – electric adjustment of the blade and scoring blade – with original angle guide – carriage length: 3400mm – made in Germany – unpainted – used saw, very good condition Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Dsdpfx Adetrhv So Njck Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Dcjdpfxou Dbkdj Ad Njk Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation Dcjdpfx Aewugczjd Nok 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ Dodpfxjy Tn Ens Ad Neck • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: used, Year of construction: 1994, Machine length: 2800 mm Length stop: Fixed, 90° Duplex cutting system Cutting width: 1300 mm with manual adjustment 7.5 kW No pre-scoring device Dcodpfx Ajzh Hwcjd Njk Location: Nattheim

Condition: used, Year of construction: 2007, operating hours: 1,650 h, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, scorer, No. 04550 Sliding table saw Martin T 60 CLASSIC Used, year of construction 2007, approx. 1650 operating hours Sliding table length 3000 mm Cutting width 1250 mm Saw blade diameter 250 - 400 mm Saw blade bore 30 mm Max. cutting height 130 mm Motor power 5.5 kW Speeds 4000 / 4800 / 6000 rpm, with digital display Pneumatically controlled 2-axis scoring unit Motor power scoring unit 0.75 kW Electric saw blade tilt adjustment from 0° to 46°, with digital display Electric cutting height adjustment, with digital display Manual cutting width adjustment by handwheel, with digital display Tool-changing system SprintLock Machine operation via touchscreen Various cutting programs, including programs for rebating, grooving, cutting angled strips, slotting and tenoning, as well as chain dimensioning Cross-cut table approx. 1300 x 650 mm LW Extendable cross-cut fence up to 3200 mm, with 2 flip stops 2 extraction ports, diameters 120 and 100 mm Including complete technical documentation, 2 saw blades and 3 riving knives Transport dimensions approx. 3200 x 2100 x 1900 mm LWH Weight approx. 1300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Dcodpfx Adozq Aqwe Nsk Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2025, neu 2025 Dedoxcbhrjpfx Ad Neck 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Dcedpoy Hf Nwefx Ad Nsk Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Dcsdpjzq Dcusfx Ad Njk Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Dcodpfxjzqyxxe Ad Njk Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 1996, Sledge length: 2800 mm Cutting width at the rip fence: 1050 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 mm Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: Digital Cutting height display: - Rip fence display: Scale Crosscut fence display: Scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Dcjdpfszqyx Eox Ad Nek Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled Dcsdpfx Aszpwlmod Nok - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, machine/vehicle number: 008497, X axis working area: 3140 mm Y axis working area: 1560 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of tool changer positions: 16 Dedpfx Adjzruy Hj Njck

Condition: good (used), Year of construction: 2006, Mobile welding table / perforated table, Junker&Partner – used: Price ex works: €950.00 (net)! Manufacturer: Junker&Partner Type: Sample assembly for trade fair Year of manufacture: 2006 Drawing: 1000-000-00 Dimensions: approx. 150x90x90 cm Mobile Condition: good Dcjdpezp Rxgefx Ad Nok Available: immediately Location: Leipzig