Used Melamine Press for sale (12,207)

Year of construction: 1995, condition: used, A hydraulic press brake with a working length of 2000mm is offered for sale. Pressing force: 320kN. Max. working length: 2000mm. Max. hydraulic pressure: 295bar. Stroke: 26-102mm. Approach speed: 102mm/s. Working speed: 8.5mm/s. Max. tool dimension: 2050mm. Control: control panel with selector switches and push buttons. Equipped with a two-hand control panel, side safety guards and tool holders. Weight: approx. 2400kg. Inspection possible by arrangement. Tedo Aga Iiepfx Afgsd

Condition: excellent (used), FOR SALE – INDUSTRIAL HYDRAULIC PRESS, SACK & KIESSELBACH Selling a SACK & KIESSELBACH hydraulic press, workshop identification number AE 7417. This is a robustly built machine, equipped with: • Work table with wedges and support pieces, as seen in the photos. • Control panel with analog gauges. • Separate hydraulic unit with a Siemens motor. Tjdpfxe Aggbue Afged • Protective housing around the work area.

Condition: good (used), Eccentric press Inventory No. 3478 Manufacturer: Ter Hart Type: EP 6 Todpfx Ao Agcwljfgod * Pressing force: 6 tons * Stroke adjustment: 5 - 42 mm * Adjustable ram: 30 mm * Table dimensions: 280 x 190 mm * Installation height: 190 mm * Overhang: 95 mm * Operation: Foot pedal * Weight: 360 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Quantity: 4 units Machine type: Mechanical stamping presses Tedpfx Ao Adu Ekjfgjd Manufacturer: Predominantly Berg & Schmid (?) MACHINE DETAILS Dimensions Length: 300 mm Width: 200 mm Height: 300 mm Weight Weight: 20 kg

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 35,000 h, machine/vehicle number: H981224, stroke length: 180 mm, throat depth: 410 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table height: 960 mm, oil tank capacity: 150 l, overall weight: 13 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, power: 11 kW (14.96 HP), pressing force: 170 t, clearance between the columns: 3,760 mm, table length: 4,230 mm, table width: 180 mm, Equipment: CE marking, documentation/manual, safety light barrier, This machine can still be inspected in its current operational state at the factory in Northern Germany. Working length: 4100 mm Distance between columns: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Todpfx Afs Ahfnueged Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Includes tool cabinet with tools.

Condition: good (used), Year of construction: 1989, Heidelberg MO-V (4-Color Used Offset Printing Machine) • Model: Heidelberg MO-V (MOV) • Type: Used 4-color offset printing machine • Year of Manufacture: 1989 • Printing Configuration: Straight machine (4/0 printing, no perfecting) Todpfx Afj Ahdt Eogsd • Dampening System: Alcolor continuous dampening with Baldwin refrigeration and recirculation • Plate Changing: Manual plate loading • Control Console: CPC 1.02 / CPC Tronic for remote ink and register control • Max. Sheet Size: 480 mm x 650 mm (19" x 25.5") • Condition: in good running condition (free of damages to gears or cylinders) • Availability: Immediate loading

Condition: used, Offered is a hydraulic press brake with 500kN pressing force. Stroke: max. 215mm. Operating pressure: max. 320bar. Stopping time: max. 95ms. Equipped with Lazer Safe laser guarding system. Inspection possible by arrangement. Tedpfo Agwqwjx Afgjd

Condition: used, Year of construction: 1988, operating hours: 7,355 h, functionality: fully functional, machine/vehicle number: 660/88, total width: 1,505 mm, total height: 705 mm, total length: 1,375 mm, space requirement width: 1,370 mm, space requirement length: 1,600 mm, space requirement height: 1,125 mm, We are selling a Spänex briquetting press, model SHB 50. The machine is not assembled, but it can be connected to power to demonstrate its functionality. Todpfxe Agvn Do Afgjd The press includes a large chip collection container, allowing it to be placed under an extraction system and automatically fed with chips. The press can, of course, also be operated without the collection container. Documents (instructions and wiring diagram) are available. The functionality of the system has been tested. We purchased the system ourselves, but were unable to install it due to structural limitations. You can view the system in the brochure under the PDF file "Assembly Example," which shows how it looks when assembled. The extraction system shown in the image is not included in the offer.

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: Tsdpfx Afo Agk Rioged - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 3130 mm TONNAGE: 80 ton THROAT DEPTH: 405 mm Tedpfx Afsmyc I Neged DISTANCE BETWEEN UPRIGHTS: 2700 mm OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 4000 x 1700 x 2400 mm

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 400 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg Todpou Icwgofx Afgsd 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Tsdpfx Aju Icw Hjfgsd Punching Press *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm Tsdpfx Aou Icxqsfgjd no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Technical details: pressure: 160 t throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Tsdsu Nfhqopfx Afged Machine can be demonstrated under power. *

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m Tsdpfeu Nfibex Afgod dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t dimension machine approx.LxWxH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) Tedpfeu Nfliex Afgsd additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 1997, Technical details: pressure: 160 t distance between columns: 1000 mm stroke: 250 mm dayligth: 600 mm distance table/ram: 600 mm table height over floor: 550 mm table surface area: 810 x 860 mm clamping surface ram: T x B: 720 x 580 mit T-Nuten mm total power requirement: 15 kW weight of the machine ca.: ca. 16,0 t The machine isn't installed yet. The pictures are from the origin location of the former owner. further details: - sideway passage W: 520 x H: 620mm - passage front side W:660mm x H: 600mm equipment: Todpfx Afsu Nfmmsged - walkable platform arround the machine= height over floor approx. 2400mm, platform approx. 2700 x 2600 x 1050mm - hydraulic pack - oil cooler i.D. *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm Tsdpfxju Nfmye Afgsd dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg dimensions of machine: L: 580 x B:280 x H:80 mm Tsdpfxou Nftge Afgjd pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Tedpou Nfttofx Afgod Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open Todpfxeu Szfus Afgod *

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t Tedpju N A Eaefx Afgjd stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: used, Year of construction: 1980, Technical details: Tjdpfx Afou N A U Iogsd Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Tedpfx Afjul S Eaogjd Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 191026

Condition: used, operating hours: 2,216 h, total length: 5,750 mm, total width: 2,110 mm, total height: 3,640 mm, Year of manufacture: 2023 Colour: Grey Weight: 27.760 kg Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 7376230761 - Operating hours: 2216 - Drive system: CNC - Control system brand: Durma - Control system type: DT-15 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 400 - Max. working width [mm]: 4050 Tsdpfx Afozcnpdogjd - Column gap [mm]: 3400 - Throat depth [mm]: 630 - Max. stroke [mm]: 365 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5750mm x 2110mm x 3640mm (l x w x h) - Transport weight [kg]: 27760kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum