Used Mengele H 1250-10 for sale (23)

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Fpedpfx Amj Ai D Ems Esp Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: good (used), functionality: fully functional, pressing force: 65 t, stroke length: 200 mm, table width: 600 mm, table length: 1,250 mm, throat depth: 500 mm, ram plate width: 600 mm, ram plate length: 1,250 mm, distance table to ram: 650 mm, total length: 2,300 mm, total width: 1,400 mm, total height: 3,000 mm, overall weight: 7 kg, Capacity: 65 tonnes Adjustable stroke: 200 mm Fpjdpfx Amsyz Sgxo Eep Upper and lower table dimensions: 1250 x 600 mm Longitudinal groove in addition to transverse grooves, allowing for the installation of a bending tool. Indicative bending capacity at maximum power: 10 mm over 1000 mm (tool not supplied) Table/ram opening (open): 650 mm Table/ram opening (closed): 445 mm Throat depth: 500 mm Machine dimensions: 2300 x 1400 x 3000 mm Weight: 7 t

Condition: good (used), functionality: fully functional, Capacity: 160 to x 1250 mm Bending capacity: 16 mm / 450 N/mm² and 12 mm / 450 N/mm² over 1250 mm Stroke 250 mm Overhang 500 mm Fjdpfxj Agv S Ie Am Eopp Maximum installation height 480 mm Weight approx. 11.2 t Main motor power 30 kW

Condition: used, functionality: fully functional, 3 plate shears with light curtain: - Huttenlocher, capacity 1040 x 3.5 mm Fpedpfx As Ahya Nsm Esp - FASTI, capacity 2540 x 3.25 mm - MENGELE, capacity 2040 x 6 mm Sold individually!

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec Fpjdpjtqqr Rjfx Am Eop working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Fjdpjvaatlofx Am Eepp Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: used, functionality: fully functional, Year of construction: 1996, Pressure 160 t Bending length 3000 mm Machine weight approx. 16 t Equipment: - Two-hand foot pedal - CNC control Cybelec DNC 800 Fedpfox A Eucex Am Espp - Hydraulic upper tool clamping - Hydraulic crowning - Hydraulic lower tool clamping - 5 manually adjustable backgauge fingers - Die displacement - Tool package - Side safety doors - Controlled axes: y1, y2, x, R

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1962, machine/vehicle number: E 557, stroke length: 125 mm, overall weight: 3,900 kg, pressing force: 40 t, table length: 1,000 mm, table width: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Fpedpfx Aoz Izdnjm Eop Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm Fedpfx Amsvxwqfj Eopp weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: used, Year of construction: 1980, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Fpjdeg Twmhopfx Am Eep Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Year of construction: 1967, condition: used, Max. cutting length: 2550mm, max. sheet thickness: 4mm, on-site inspection is possible. Fsdpfxs Ai Hdxe Am Ejpp

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, Dimensions: 2050 x 6 / 4 mm, adjustable cutting angle and cutting gap, rear light barrier. Fodpoz Iv Nfjfx Am Eepp

Condition: good (used), functionality: fully functional, pressing force: 160 t, table width: 1,250 mm, throat depth: 500 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools Fsdpfxozucq Ej Am Espp .

Condition: good (used), functionality: fully functional, Year of construction: 1989, Sheet metal width: 4050 mm Sheet metal thickness: 4 mm Fpodpsz I Ttnsfx Am Ejp Machine weight (approx.): 9,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Fpedpfxjzk A Ive Am Eop Tool package Side safety doors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, distance between stands: 3,050 mm, overall weight: 27,000 kg, pressing force: 250 t, working length: 3,550 mm, TECHNICAL DETAILS Press force: 250 tons Bending length: 3,550 mm Frame width: 3,050 mm Fpodozk Ez Eepfx Am Eep MACHINE DETAILS Dimensions & Weight Footprint: approx. 4,500 x 2,000 x 3,400 mm Machine weight: approx. 27,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: A10587, controller model: Cybelec DNC 30, stroke length: 200 mm, throat depth: 250 mm, distance between stands: 2,050 mm, pressing force: 80 t, TECHNICAL DETAILS Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Fpodpfxozk E Ace Am Ejp Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: Hydraulic cylinder from Mengele press brake -Equipment: with threaded stop for depth limitation -Piston diameter: approx. 240 mm Fpjdpfx Aoc U Rh Hem Eep -Piston rod: Ø 200 mm -Stroke: approx. 380 mm -Piston rod mounting: 212 x 212 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 840/410/H355 mm -Weight: 430 kg/piece -Weight: 430 kg/piece

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: Cybelec, stroke length: 250 mm, distance between stands: 3,050 mm, pressing force: 130 t, working length: 3,550 mm, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Frame width: 3,050 mm Stroke: 250 mm MACHINE DETAILS Control system: Cybelec Dimensions & Weight Fpodpfxjzk E Aio Am Eop Footprint: 4,000 x 2,000 x 3,000 mm Machine weight: 11,600 kg

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, Fodot Hllpepfx Am Eopp • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: ready for operation (used), functionality: fully functional, controller model: Cybelec CypTouch 12 - 3 Achsen, bending force (max.): 125 t, stroke length: 250 mm, table height: 900 mm, working length: 3,550 mm, The machine control has been renewed! TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Frame distance: 3,050 mm Stroke: 250 mm Throat depth: 320 mm Table width: 120 mm Table height: 900 mm Return speed: 100 mm/s Working speed: 10 mm/s Fjdpfx Amjygxk To Eopp MACHINE DETAILS Control (renewed): Cybelec CypTouch 12 – 3 axes Oil volume: approx. 250 l Total power requirement: 11 kW Dimensions & Weight Space requirement: approx. 4 x 2 x 3 m Machine weight: approx. 11 t EQUIPMENT Hydraulic tool clamping Crowning system Swivelling operator control panel, front right Free-moving foot pedal Side safety guard (safety grille) Rear safety guard (safety grille)

Condition: used, Type: C280-35L Pressure: 280 T Working length: 5.300 mm Technical characteristics: HYDRAULIC Fpedps Du Txofx Am Eep New hydraulic and electric systems

Condition: used, Pressure: 250t Fodpfj Du Trjx Am Eepp Sheet metal length: 3250mm New hydraulic and electric system