Used Mesh Waving for sale (817)

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: Fedjttu Sgepfx Afnofu - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Ffedpfxsvvf T Ao Afneu

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires Ffsdpfx Ajxgg T Uefnsu • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine Ffjdpfxexgg Rtj Afnju H17, Spool pay-off system, cross wire DV6, Prefeeding system DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Condition: good (used), Big bag traverse, lifting sling, adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, cross traverse, H-traverse Fsdpfex Ngp Rsx Afnofu -Crane traverse: Traverse for reinforcing steel mesh or similar -Load capacity: 5 tons -Hook chain: Length 940 mm -Transport dimensions: 2920/2365/H540 mm -Empty weight: 315 kg

Condition: good (used), Dimensions: Diameter: 950 mm Height: 970 mm Weight: 316 kg Sieve hole size: 2 mm Ffjdpfohx Nfgsx Afneu

Condition: good (used), Year of construction: 2000, Reinforcing steel mesh bending machine, bending machine for reinforcing steel mesh Ffedpfxjydpndj Afnou -Manufacturer: MBS, Reinforcing steel mesh bending machine type MBM 030 -Passage width: 3120 mm -Operation: Foot switch, semi-automatic -Dimensions: 720/3965/H1140 mm -Weight: 1170 kg

Condition: good (used), functionality: fully functional, Year of construction: 1999, The system was completely overhauled in 2012! Max. component dimensions: approx. 700 x 300 x 250 mm (L x W x H) Max. weight per casting: 10 kg Control: CPU Siemens S7-300 Internal diameter of shock wave chamber: 970 mm Shock generator: 6 - 10 kJ Hydraulic installation: system pressure of small pump = 250 bar Including wastewater treatment system and soundproof cabin Fedpfxsyfggto Afnefu

Condition: good (used), Included in the scope of delivery: 01x Stackable wire mesh frame, used Total weight: 27.23 kg Color: blue Total width: approx. 600 mm Total depth: approx. 800 mm Total height: approx. 950 mm Usable height: approx. 800 mm Opening size: approx. 550 x 520 mm (W x H) Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm Tube profile: approx. 22 mm Consisting of 2 foldable side panels! 01x One-way pallet, used Total width: approx. 600 mm Total depth: approx. 800 mm Height: approx. 150 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be quoted separately depending on the delivery location and scope. Ffjdow Rvtaopfx Afneu

Condition: excellent (used), The scope of delivery includes: 01x lattice box, used Length: approx. 820 mm Depth: approx. 420 mm Height: approx. 420 mm Material: steel Material color: galvanized Wire Ø: approx. 4.50 mm Mesh width: approx. 54 x 54 mm Stackable: yes Stacking edge: 30 x 18 mm (W x H) Inner height: front approx. 185 mm | rear: approx. 390 mm Weight / piece: approx. 15.74 kg Note: half open in width Your contact person in our company: Ffsdpomnnvasfx Afnju Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The delivery includes: 01x Rear panel mesh, used Material color: yellow Overall width: approx. 2,740 mm Overall height: approx. 1,100 mm Mesh size: approx. 50 x 50 mm Frame profile dimensions: approx. 40 x 40 x 4 mm Wire thickness: approx. 3.0 mm Weight per unit: approx. 26.84 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Fsdpfxsxcuc Ao Afnjfu This item is only offered for collection. If transport or shipping of this item is required, additional costs will apply, which can be requested separately depending on the place of delivery and scope of delivery.

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Fjdpfxow Uk Aqe Afnjfu

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Ffedpswfg Ewofx Afnou

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Fjdpfjud Svzsx Afnofu

Year of construction: 2009, condition: ready for operation (used), A fully automatic lattice girder welding system for the production of reinforcing steel (rebar) is available. Outlet height: 1400mm, beam length min./max.: 800mm/16000mm, base width: 58mm, beam width range: 70mm-116mm, max. production capacity: 15m/min. Beam type KT: upper beam diameter range: 5mm-16mm, lower beam diameter range: 5mm-16mm, diagonal beam diameter range: 4.5mm-9mm, beam height range: 70mm-400mm, diagonal pitch: 190mm-210mm. Beam type KTS: top chord diameter range: 5mm-7mm, bottom chord diameter range: 5mm-7mm, diagonal beam diameter range: 5mm-7mm, beam height range: 80mm-310mm, diagonal spacing: 200mm. Documentation available. On-site inspection is possible. Ffedpswfg Eksfx Afnsu

Year of construction: 2001, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible. Fsdpfewfg Eqox Afnofu

Year of construction: 2007, condition: ready for operation (used), A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible. Ffjdpfx Afoxpw Tdenou

Condition: excellent (used), Year of construction: 2016, operating hours: 250 h, functionality: fully functional, machine/vehicle number: PN99516, total height: 860 mm, total width: 660 mm, total length: 560 mm, manhole location: front, type of input current: AC, overall weight: 93 kg, input voltage: 230 V, input frequency: 50 Hz, height adjustment type: electric, Equipment: documentation/manual, For sale: A lightly used Vici Vision Optical Shaft Measuring Machine, being sold as it does not meet our specific requirements. Suitable for shafts and similar components up to Ø90 x 260mm, with an effective measuring range of Ø8 x 100mm. Original price including accessories was CHF 59,595. Last software version and update date: MTL 8.74 (date unknown) Last calibration: 20.03.2023 (certificate available on request) Equipment included: - Vici computer (no monitor, mouse, or keyboard; for demonstration purposes only) - Manual, electrical schematic, operating and maintenance instructions, service engineer's handbook - Center clamp with jaws 0.6-0.8 and jaws 0-6, jaws 0.2-0.4, center for lower tailstock - 6-jaw chuck, collet holder with collets 0.3-1.5 - Screws and 24mm & 32mm open-ended wrenches Technical specifications: Model: MTL X10 Measuring range: Ø8 x 100mm Max. workpiece dimensions: Ø90 x 260mm Max. workpiece weight: 3 kg Diameter measuring accuracy at 20°C: (2 + D[mm]/100) µm Length measuring accuracy at 20°C: (5 + L[mm]/100) µm Pixel size: 2 x 2 µm Repeatability, diameter at 20°C: 0.2 µm Repeatability, length at 20°C: 2 µm Max. vertical traverse speed: 20mm/s Ffsdjx S Nc Sopfx Afneu Max. rotational speed: 180°/s Machine weight: 93 kg Power supply: 230V – 50/60 Hz Dimensions (L x W x H): 560 x 660 x 860 mm Recommended table size (solid steel frame or granite table): 1250 x 750 x 710 mm

Condition: good (used), Year of construction: 1992, Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears Fodpfoyanqvex Afnsfu -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 2,450 mm, wire diameter (max.): 12 mm, type of input current: AC, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Ffjdpfxev Ed Ano Afnsu Wire: 2-12mm

Year of construction: 2008, operating hours: 670 h, condition: like new (used), SEHO solder wave with spray fluxer; 3 x preheater (IR), hot air convection, lighting; double wave; lots of carriers; inlet / outlet; empty lead-free solder pot; excellent, never used machine. Fodsydnpaepfx Afnofu

Condition: good (used), Shaft vise, machine vise -without: prism -Dimensions: 365/205/H175 mm -Weight: 20 kg Fsdpfodz Smysx Afnofu

Condition: good (used), Shaft, axle shaft, spindle shaft, axle bolt Ffjdpfjwq Ipbjx Afnju -Shaft: axle shaft spindle shaft -Type: Shaft Ø 30/40/45 mm -Dimensions: see photos -Total dimensions: Ø 65 x 135 mm -Weight: 1.2 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm Ffedpfx Ajc Spnajfneu -Total height: 194 mm -Weight: 20 kg

Condition: used, Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose -Mesh protection hose: red Ffodpfsd Nkrzox Afnju -Number: 4 boxes available -Price: complete -Dimensions: 375/285/285 mm per box -Total weight: 18.5 kg