Used Mesh Waving Loom for sale (912)

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines Ncedpfx Aoymb Unehfeu - Double point welding is perfect technology for thicker wire diameters Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Technical data: Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm Ncedpfxowu Tu Dj Ahfou 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Ncsdpfewu Dcxox Ahfju Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: new, functionality: fully functional, inner dimension length: 800 mm, inner dimension width: 1,200 mm, 12 x GITTERBOX II.Wahl UPPER FRAME CLIP FRAME Height 1000 mm NEW 12 mesh boxes / stacking frames Article no. 1000.12_AB consisting of 2 elements powder-coated color green slight optical defects = II. choice these are assembled on the Euro pallet and held together with hooks. When not in use, these elements can be stored to save space. Basic dimensions: 1200 x 800 mm Height: 1000 mm Mesh size: 100 x 100 mm / wire Ø 3.8 mm With flap for easy removal of goods Article can be inspected by arrangement We are happy to advise you. Photo similar Ncodpfx Ahotvfm Tsfou Goods are only offered for collection. Please contact us if you wish to have the item shipped.

Condition: new, functionality: fully functional, machine/vehicle number: 800.12_AB, inner dimension height: 800 mm, total width: 1,200 mm, mesh size: 100 mm, 12 x GITTERBOX II.Wahl UPPER FRAME CLIP FRAME Height 800 mm NEW (800.12_AB) 12 lattice boxes / stacking frames Article no. 800.12_VS consisting of 2 elements powder-coated color green Njdpfxstvfqpj Ahfjcu slight optical defects = II. choice these are assembled on the Euro pallet and held together with hooks. When not in use, these elements can be stored to save space. Basic dimensions: 1200 x 800 mm Height: 800 mm Mesh size: 100 x 100 mm / wire Ø 3.8 mm With flap for easy removal of goods Item is NEW with minimal optical defects Item can be inspected by arrangement We are happy to advise. Photo similar

Condition: like new (used), Year of construction: 2003, functionality: fully functional, for sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003 refurbished in 2024 like new Ncodjv Hxq Aepfx Ahfou for sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 Nsdpfx Ahsr Ix Igofjcu All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: used, Year of construction: 1988, functionality: fully functional, For Sale: Ncjdpfx Aov Hxltehfju Several 6 pcs. Jakob Müller MVC 150s first generations are for sale: MVC 150 8/46mm 1988 88.60237 no. 309 MVC 150 8/46mm 1988 88.60085 no. 319 MVC 150 8/46mm 1988 88.60319 no. 332 MVC 150 10/36mm 1988 88.60041C no. 314 MVC 150 10/36mm 1988 88.60041B no. 313 MVC 150 6/66mm 1988 88.60000 no. 307 Year: 1988 Condition: well runnig and complete Price: €3,900

Condition: used, Year of construction: 1991, For sale 10x Jakob Müller Frick CH MVC 150 Müdata 4 Label Loom We only sell as a set for €50,000 Each loom €5,000 1989 in 12/30mm, To: 89.30018 Müdata 4, No. 70 1990 in 12/30mm, To: 90.30452 Müdata 4, No. 71 1990 in 12/30mm, To: 90.30370 Müdata 4, No. 72 1990 in 8/46mm, To: 90.30337 Müdata 4, No.325 1991 in 12/30mm, To: 91.30247 Müdata 4, No. 73 1990 in 7/57mm, To: 90.30166 Müdata 4, No. 76 1990 in 7/57mm, To: 90.30461 Müdata 4, No. 77 1990 in 9/36mm, To: 90.30371 Müdata 4, No. 78 1990 in 9/36mm, To: 90.30080 Müdata 4, No. 79 Ncedpfov T Nb Sox Ahfju 1991 in 7/57mm, To: 91.30312 Müdata 4, No. 80 all looms are nice and well running

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C Ncjdjxpuahspfx Ahfsu temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: new, Year of construction: 2025, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 620mm; bag length: 100-380mm; bag width: 110-300mm; max. speed of the machine in neutral: : max. 20 cycles/minute; compressed air: 0,36m³/6bar; power: 220V, 3kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Ncodpfov Nm Alsx Ahfsu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 1.200mm; bag length: 100-800mm; bag width: 290-590mm; max. speed of the machine in neutral: 12 cycles/minute; compressed air: 0.8m³/6bar; power: 220V, 6kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nedpfsv Nm A Ejx Ahfecu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc.. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 800mm; bag length: 100-480mm; bag width: 160-390mm; max. speed of the machine in neutral: 15 cycles/minute; compressed air: 0.40m³/6bar; power: 220V, 4kW. Nodpfxev Nm Arj Ahfjcu That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 1.000mm; bag length: 100-600mm; bag width: 240-490mm; max. speed of the machine in neutral: 14 cycles/minute; compressed air: 0.6m³/6bar; power: 220V, 5kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Njdpfxev Nm Axe Ahfjcu

Condition: new, Year of construction: 2025, Auto clipping machine to pack fruits and vegetables as well as industrial products into netting sleeves which are closed at both ends by a metallic staple/clip. Suitable to be combined as infeed system: AMTEC VERTIwrap auto dosing machine for fruits, vegetables, etc.- At least, at one of the tops, a labelling/identification tag is placed. - Possibility of an automatic change of tube (suitable to carry 200m of net), controlled by a motor. Net extraction through a sliding system with two gears: a slow for making the pack and a fast one for getting back the remaining net and returning to the start position. Very regular pack size for very flexible net being supplied form net pipe with diameter of 200mm. Suitable for packs of 0.5-5.0kg. Control panel for easy operation. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; power: 380V, 2.9kW; air: 1.5m³/min, 6bar; machine dimensions: L1840xW720xH2010mm; weight: 425kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ncsdpfjv Nm Dcox Ahfsu

Condition: new, Year of construction: 2025, Fully automatic complete counting and packaging system for a wide range of agricultural products into mesh bags with a bag weight of 0.5 to 5.0 kg. Including feeding hopper, infeed conveyor, counting machine and fully automatic mesh bag packaging machines. - Specifications: max. speed of the machine in neutral: 18 cycles/minute; power: 380V, 2.6kW; compressed air: 6bar, 1.5m³; machine dimensions: customized. Ncodpfov Nm A Sex Ahfju Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Ideal for pallet racking systems with a frame depth of 800 mm and 2700 mm crossbars. It is also suitable for other applications. Size: 1340*820 mm (55*105 mm) Load capacity: approximately 400 kg/m2 If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and will be happy to assist you with your planning. Ncsdpfx Aehbhavshfju Further accessories available, such as: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep support beams. Shipping: Please request shipping costs, providing your postal code, location, and the desired quantity of items. Further service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices, as well as prior sale, are subject to change!

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Nedjwfg Ewopfx Ahfjcu

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Nodpoud Svzsfx Ahfecu

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Ncsdpfextpq Njx Ahfju

Year of construction: 2023, operating hours: 0 h, condition: new, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel mesh into the desired shape. Product information: - Motor Power: 7,5 kW (5,5 kW) - Voltage: 380 V - Length: 6400 mm (3400 mm) - Width: 1000 mm - Height: 1090 mm - Hydraulic Oil Tank Capacity: 36 l - 6 m (3 m optional) - 3 stops - Bending angles: 45°-90°-135° Nedjm Tmddjpfx Ahfjcu - Net weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), Mesh Gratings / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Material finish: hot-dip galvanized Overall width: approx. 1,340 mm (crossbar direction) Overall depth: approx. 1,080 mm (load bar direction) Suitable for frame depth: 1,100 mm Clear support span: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Load bar height: 30 mm or Material finish: hot-dip galvanized Overall width: approx. 1,330 mm (crossbar direction) Overall depth: approx. 1,040 mm (load bar direction) Suitable for frame depth: 1,050 mm Clear support span: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Load bar height: 30 mm We stock mesh gratings for the following rack depths: 1 m, 1.05 m, 1.1 m or 1.2 m This mesh grating is the perfect solution to optimize your racking and provides excellent support for your storage requirements. Price on request – Get professional advice! Looking for additional shelf panels or mesh gratings in other versions? No problem! Our team will be happy to help you design a customized racking solution tailored to your individual requirements. Do you have a rack you wish to sell? Simply send us photos and measurements, and we will provide you with a fair offer. Contact us: BLB GmbH – Contact person: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your site! If you have any questions, please do not hesitate to contact us – we look forward to your call or message! Nodpfxjp Duf Ne Ahfscu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Stainless steel meat injector with mesh conveyor belt Manufacturer: Fomaco A/S, Denmark Model: FGM 88 SC Machine number: 10354-2006 Year of manufacture: 2006 Power supply: 3×400 V / 50 Hz Current consumption: 29 A Protection (max. fuse): 63 A Working air pressure: 6 bar Number of needles: 88 Type of belt: Plastic mesh belt Belt width: 720 mm Ncsdpsw D Hz Nefx Ahfsu Overall dimensions: 2300 mm (L) × 1150 mm (W) × 2240 mm (H)

Condition: like new (used), 3,000 pcs. insert mesh panels with pallet stop, as new 🧰 Product features • Condition: as new • Colour: galvanized • Dimensions: 930 x 1170 mm • Mesh size: 45 x 95 mm • Load capacity: 200 kg per mesh panel • Inner clearance: 99 cm • Outer clearance: 110 cm • Features: with pallet stop 💰 Price: €9.90 net excl. VAT Njdpfxsxhc Rxo Ahfscu • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our Terms and Conditions. All prices excl. VAT ex stock.)

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 45 cm • Load capacity: 1000 kg • Stack load: 4000 kg • Weight: 56 kg • Front side foldable • Incl. sheet metal base 💰 Price €59,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request Nsdpfx Ahow Eb Slofjcu • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Over 5000 linear metres of pallet racking from various manufacturers permanently in stock (Specifications, details and prices subject to change and errors excepted! See our terms and conditions. All prices ex warehouse, excl. VAT.)