Used Metal Granulator for sale (35,572)

Condition: used, functionality: fully functional, Year of construction: 1989, control type: CNC control, Hydraulic Swivel Bending Machine Manufacturer: RAS, Type: 74.40, 4060 x 3 mm Year of manufacture: 1989 Technical data Manufacturer: RAS Year of manufacture: 1989 Type: 74.40 Working length: 4060 mm Hfodpfx Aszp Nu Hjf Aek Capacity: 3 mm Motor power: 7.5 kW Upper die stroke: 400 mm Back gauge adjustability: 80 mm Bottom die adjustability: 80 mm Bending angle: 0 – 180° Dimensions: approx. L 5.40 x W 1.90 (plus control arm) x H 2.50 m Weight: approx. 7 t Equipment • Controlled rear stop with sections: 10 – 1500 mm • CNC control: Multibend 8000 • Motorized bending die adjustment • Various bending tools: - Gooseneck die, H 130mm, length = 4060mm, segmented - Bending die 30 mm - Sharp die 45°, length = 4060mm - Sharp die 45°, length 4060 mm, raised by 20 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Hsdpfxjucw S Ss Af Aofk

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Hsdpfx Afjwk Nk Tj Ajfk

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Hsdpewrhwuofx Af Asfk

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Hfedjxy R Ezepfx Af Ajk

Year of construction: 2008, condition: ready for operation (used), A complete sheet metal processing center for bending and cutting including automation is available. Documentation available. On-site inspection is possible. Hodpfx Aov Rp S Ejf Ajfk

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Hodoydp Abspfx Af Aefk

Condition: ready for operation (used), A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible. Hfedox Elz Ropfx Af Ajk

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Hodpoww Ivnefx Af Aefk

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 Hfjdpfx Aeztp Stsf Aok diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 Hfedpfx Aoztp S Hjf Ajk - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1964, Sheet width: 1650 mm Sheet thickness: 4 mm Straightening roller diameter: 45 mm Hsdpfozty Dtsx Af Aefk Support rollers: 140 pieces Straightening rollers: 17 pieces

Condition: used, Metal Detector Checkweigher Combination System Mettler Toledo Garvens XS 3 This combination system is an advanced solution for accurate weight control and reliable metal detection in modern production lines. The metal detector checkweigher combines a high-quality checkweigher with a powerful metal detection system in a single, compact unit. The machine is ideal for use in the food industry and other sectors where food safety and quality control are essential. This industrial weighing system automatically weighs products and checks them for metal contaminants, such as ferrous, non-ferrous, and stainless steel particles. The checkweigher combination enables efficient product inspection without interrupting the packaging line. The user-friendly control system allows for quick product changeovers and easy adjustments. This minimizes downtime and increases productivity. The metal detector and checkweigher work together seamlessly to ensure optimum product safety. Ideal for food manufacturers, packaging companies, and industrial applications. A reliable choice for companies looking for a professional metal detector checkweigher solution. - Production capacity: 83 pcs/min - Weighing range: 20–3000 g Hodpfxjztnu To Af Ajfk - Graduation: 0.5 g - Working width: 300 mm - Equipped with: two pneumatic rejectors (metal detector and checkweigher) - Metal detector aperture: 345 x 105 mm - Infeed and outfeed height: 810 mm (adjustable by an additional 70 mm) - Voltage: 100–240 V (1 + N, 50/60 Hz) - Power: Not specified - Year of manufacture: 2014 - Weight: 415 kg - Dimensions (W x D x H): 2530 x 1320 x 1630 mm

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Hfsdpon Tpmuofx Af Aek

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Hsdpfjn Tpmxsx Af Asfk

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Hodpfxsxcnxdo Af Ajfk Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: used, Year of construction: 2019, Manufacturer: Loma Model: IQ4 Year: 2019 Condition: Used Serial Number: Q4W35-20-47098D Stock Number: 3404J Hfedpsznmh Uefx Af Ajk Belt width: 300 mm Clearance: 350 x 130 mm (WxH) Compressed air: 6 - 8 Bar Power: 240VAC, 50Hz, 1Ph Dimensions: 2000 x 1100 x 1500 mm With pneumatic reject, light and sound signal

Condition: excellent (used), Year of construction: 1995, operating hours: 123 h, Technical Description – Cassel Metal Shark® Octa Product Description: The Metal Shark Octa is an industrial metal detection system with an octagonal aperture, specifically designed for the reliable detection of metal contaminants in bulk materials or products on conveyor belts or in gravity chutes. It detects ferrous, non-ferrous, and stainless steel particles with high sensitivity. Key Features: Remote monitoring via SHARKNet® software Digital Signal Processing (DSP) for precise and stable detection Octagonal aperture for optimal material flow and detection area High sensitivity – typical detection performance: Ferrous: ≥ 0.8 mm Non-ferrous (e.g., aluminum): ≥ 1.0 mm Stainless steel: ≥ 1.2 mm (depending on the product and size) Automatic calibration and compensation of product effects Hfedpfxeztl Hys Af Ajk Touchscreen display with user-friendly, multilingual interface Hygienic stainless steel housing, available in IP65/IP66 Power supply: 100–240 V AC, 50–60 Hz Outputs: Relay, 4–20 mA, digital inputs/outputs, Ethernet, USB Application areas: Food industry, chemical industry, pharmaceuticals, recycling, wood and plastics processing Advantages: Excellent noise suppression Reliable continuous operation 24/7 Easy integration into existing systems Support for HACCP, IFS, BRC, and other QM systems

Condition: good (used), functionality: fully functional, XOCA 2000/5 sheet metal bending machine. Hfedpfxjzurxlj Af Ask

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) Hodpezhudwofx Af Ajfk THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: NE100230E50133, protection type (IP code): IP55, overall weight: 2,100 kg, input voltage: 400 V, belt width: 950 mm, STEINERT NE 100 220 E50 Eddy Current Separator | Non-Ferrous Metal Separator | Fully Refurbished For sale: a STEINERT eddy current / non-ferrous metal separator, type NE 100 220 E50, used for recovering non-ferrous metals (aluminum, copper, brass, etc.) from bulk material streams such as shredder residue, Zorba/shredder NE-mix, slag, or similar feedstocks. The unit has been fully refurbished – new conveyor belt, new control system – and is in excellent, ready-to-run condition (see photos). Solid steel frame base, compact footprint, available immediately. Technical data: Manufacturer: STEINERT Elektromagnetbau Type: NE 100 220 E50 Feed width: 950 mm Belt speed: 0.5–2.0 m/s (mechanically adjustable via handwheel) Belt drum drive: 2.2 kW, IP 55 (variable gearbox IP 44) Magnet system drive: 4.0 kW, IP 55 Magnet system: fixed field frequency, adjustable up to 45° Particle size range: 5–140 mm (version E5013: 5–100 mm / E5005: 25–140 mm) Rated throughput (datasheet): approx. 10 m³/h Field-tested throughput: Zorba / shredder NE-mix 20–100 mm: approx. 5–8 t/h light, loose material: approx. 3–6 t/h heavy, uniform material: approx. 8–12 t/h Protection class (overall unit): IP 55 Hfodpozd Srwefx Af Aek Permissible ambient temperature: -10 °C to +35 °C Total weight: approx. 2,100 kg Condition: fully refurbished – new belt, new control system

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available Hfodpfshmmfkox Af Ask - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, controller model: BMS 9, working width: 6,200 mm, Equipment: CE marking, documentation/manual, foot remote control, Used Biegemaster press brake, model BM 6.1,25 -- available from September 2026 -- Year of manufacture: 2002 Working length: 6200 mm Max. insertion depth: approx. 1130 mm Bending capacity, steel 400 N/mm²: 1.25 mm Bending capacity, aluminum 190 N/mm²: 2.00 mm Stands + clamping arms: 5 pieces Incl. electric shearing device Incl. manual and wiring diagrams Weight: approx. 3 tons Operating modes: - manual Hfedpszkav Rofx Af Ajk - Automatic operation with 9-fold program control BMS9 (description see PDF) The machine has been used little and is in good condition.

Condition: ready for operation (used), A spare front panel display for a Boekels Discovery C metal Detector - tested and working Hfedpfezpy E Nsx Af Ajk

Condition: used, Sheet metal cabinet with hinged door, LID Original lid for the accessory cabinet Lid for FP1 / FP2 / FP3 with 2 sliding shelves Hodpfxjznn Hxs Af Ajfk without contents Length: 1000 mm Width: 750 mm Height: 960 mm