Used Metal Spinning Machine for sale (66,347)

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Hfedpfx Aed Evcwehaoh Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Hsdpfx Ahjd Ixbzeaofh OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Hfjdpfjd Ixadox Ahaoh Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. Hodpfx Astp H Ershajfh The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. Hodpfovu Syyox Ahasfh TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, controller model: ATL 550, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Hfodpfx Ahoxanlfoaoh Haco press brake type PPM 4m x 135T ATL 550 control Motorized back gauge X-axis Manual crowning table Monobloc punch Monobloc die

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Easybend 2DT, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Haco press brake type PPES 4m x 135T Hfodpfxoxbnz As Ahaeh Easybend 2DT CNC control Motorized backgauge X-axis 2 pneumatic fingers Manual quick-release clamping system for punch, European Standard type Table for die, European Standard type

Condition: new, Year of construction: 2026, control type: CNC control, controller model: Easybend 2D, working width: 3,100 mm, bending force (max.): 150 t, distance between stands: 2,600 mm, New machine Haco press brake type OPTIFORM 3m x 150T Easybend CNC controller Hfodpfexan Imsx Ahash Rear motorized back gauge axis XR Manual table for standard European-type tooling Manual fast clamping system for punches, European System type DSP light barrier Option: 2 swiveling front support arms Version OPF 30150 + : with XRZ1Z2 backgauge - CNC crowning

Condition: excellent (used), total length: 4,000 mm, Overhauled used machine Haco press brake type PPME 4m x 160T Motorized X-axis backgauge, adjustable with + and - buttons 4 manually movable fingers Used European System punches 4m long monoblock die in good condition Hfodpfetz Sg Aex Ahajh

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, controller model: ATL 595, working width: 3,100 mm, power: 19 kW (25.83 HP), bending force (max.): 200 t, distance between stands: 2,600 mm, Refurbished machine Hfsdpfx Ahexanm Ajaeh Haco press brake type PPH 3m x 200T New ATL 595 controller Motorized back gauge X axis European Standard type punches Monoblock die

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Easybend 2D, working width: 3,600 mm, back gauge: 800 mm, total length: 3,600 mm, bending force (max.): 135 t, distance between stands: 3,100 mm, Refurbished machine Hfjdpexamcvjfx Ahash Haco press brake type ERMS 3.6m x 135T Motorised back gauge X axis Manual quick-clamping system for punches European System type punches Standard European type dies

Condition: reconditioned (used), functionality: fully functional, control type: CNC control, controller model: Easybend 2DT, working width: 4,300 mm, bending force (max.): 200 t, Refurbished machine Haco press brake type ERMS 4.3m x 200T Motorized backgauge axis X, stroke 1000mm Manual quick-clamping system for punches, European Standard Monoblock die table Hfjdpjxbnx Isfx Ahaoh

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Hfedecka N Uepfx Ahash Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days Hfjdpfx Ahec Nxwheaeh We are looking forward to your contact!

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: Hfedpfx Ahow Rldzjajh - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Hfodeb Eg Nkspfx Ahash Invoices are issued either with 0% as intra-Community delivery.

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm Hfodpfx Ajc Ikrqshaeh the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: new, Year of construction: 2026, ZGH type machines are a versatile solution for sheet metal processing. They can be used universally for demanding craft operations. To create this versatile solution for all applications up to 1.2 mm sheet steel, PPHU Prod Masz drew on its years of experience in mechanical engineering. The ZGH offers the optimum in precision, durability and stability. This model is equipped with a control panel. Hsdpfx Ahoc I Tn Hsajfh the maximum working length 3140 mm the max. thickness of the sheet for 1.2 mm (steel) the weight of the hand machine is around 2100 kilograms the lifting of the upper beam in three layers bending beam: 30 mm the max. clear width between the beams 100 mm bending angle: 150 degrees delivery to Germany 750 euros delivery date: up to 2 weeks roller shears optional for an additional charge rear stops with scale optional for an additional charge we look forward to hearing from you!

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand weight 240 Kg dimensions 1420 x 600 x 750 m Hfjdsupxdkepfx Ahaoh

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 10,246 h, machine/vehicle number: 5022/03, working width: 3,000 mm, 1995 COLLY folding machine in working order. DELEM DA20 numerical control Hedpfx Ahsu E Eyrsasfh Power 125T for 3m

Year of construction: 2006, condition: ready for operation (used), FASTEMS Type: MLS-XHD Load max pr. pallet 6.000 kg Machine capacity 5 pcs Pallet capacity 25 pcs Available pallets 19 pcs Loading stations 2 pcs X 2650 mm max Y 2300 mm max Robot with grinding function 1 pcs Layout dimensions 15 x 54 meter Hfedpfx Ahsguk E Tjash Build year 2006

Condition: new, Year of construction: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without roller shears We are your partner when it comes to sheet metal working machines. Our claim to ourselves is to provide high-quality and reliable work in order to more than meet your requirements! We are only so successful because we put our heart and soul into our work! Technical specifications the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms lifting the top beam in three layers The maximum clear width between the beams is 80 mm Delivery throughout Germany 165 euros Hedpfx Aob Hqa Eshasfh Price: 1450 euros incl. transport rollers Delivery time: every week Cash on delivery The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros Manual folding machine costs 75 euros as an option The machine complies with CE guidelines and has a 12-month guarantee. We issue the invoices with 0% (intra-community delivery) as well as with 23%. We are looking forward to your contact!

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Hfsdpfxsiqk Aqj Ahaeh

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, overall weight: 500 kg, Manual spinning machine, Make: Pensel Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2300 rpm (stepless) Spindle mount: M 36 Manual steel rest Tailstock stroke: 300 mm (smooth sliding quill) Machine weight approx.: 500 kg Machine description: - Powerful, lightweight spinning machine - Overhauled and ready for use - Main spindle with new bearings - New three-phase motor and belt drive - Main spindle with stepless speed control Hjdpfxsxp Sdds Ahaefh - New electrical control system - Newly painted

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Hfsdpfx Ahsxp Sfhsajh Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels