Used Spark Edm Machine for sale (64,595)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Table size: 650 x 400 mm Maximum workpiece size: 950 x 550 mm Maximum workpiece weight: 250 kg Generator output: 50 A Travel: X 400 mm Travel: Y 300 mm Travel: Z 200 mm Machine dimensions: 2000 x 1700 x 2100 mm Machine weight: 1400 kg Hedpfxsyr Ih Ss Ad Rjfg Accessories - Machine manual and operating instructions - Magnetic table - Planetary head Very good condition. Being sold due to company closing.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Table size: 600 x 400 mm Maximum workpiece size: 900 x 600 x 330 mm Maximum workpiece weight: 750 kg X-axis travel: 400 mm Y-axis travel: 300 mm Hsdpfx Aoyity Uod Rjfg Z-axis travel: 300 mm Generator output: 60 A Machine dimensions: 2190 x 1880 x 2360 mm Machine weight: 2800 kg Accessories: - Magnetic table and EROWA clamping system - Machine manual and operating instructions The machine is in very good condition and comes from a small family business that recently closed down.

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Hfodpfx Adeuyk Rls Rog

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Hjdpfx Adsuu Dl Ro Rofg Automatic wire threader

Condition: ready for operation (used), - USED - MANUAL DIE SINKING EDM MACHINE    X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 200 mm Hodpfx Adey R E Uhj Rofg TANK SIZE: 800 x 500 x 400 mm

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance Hfedpfeytkdrex Ad Rsg WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT Hedjyry Taspfx Ad Refg

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A Hjdpfx Adjhktttj Rofg X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Hodpey R Dtcefx Ad Rjfg

Condition: not inspected (used), functionality: unexamined, power: 2.5 kW (3.40 HP), overall weight: 1,000 kg, table length: 350 mm, table width: 200 mm, No reserve price – guaranteed sale to the highest bidder! Placement of a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Table dimensions: 350 mm x 200 mm MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,100 x 2,200 mm Machine weight: 1,000 kg EQUIPMENT Suitable workbench with various copper electrodes Two-axis digital display (Manufacturer: HEIDENHAIN) External reference: 30 Hfodpjy D T Ehofx Ad Rjg

Condition: new, Year of construction: 2026, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, total height: 2,280 mm, total length: 1,445 mm, total width: 19,975 mm, overall weight: 2,600 kg, Technical Data: Travel Paths: X: 600mm Y: 500mm Z: 755mm W: 500mm W-Type: Servo Motor Dimensions (W x D x H): Hjdpsy R Npvjfx Ad Refg 1975 x 1445 x 2280 mm (max. 2785 mm) Required Space (W x D x H): 2100 x 1600 x 2900 mm Usable Electrode Diameter: ø 0.1 ~ ø 3.0mm (up to ø 6.0mm optional) Usable Electrode Length: 800 mm Machine Weight: 2600 kg Max. Workpiece Weight: 1000 kg Power Supply: 3ø 380V 50~60Hz (adjustable) Max. Permissible Current: 30A Rated Load Capacity: 5 KVA Required Pneumatic Pressure: 5 bar Ion Exchange System with Sensor

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible. Hfsdpfx Asy N Uwisd Rsg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,435 mm, total width: 2,203 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 725 mm, workpiece length (max.): 600 mm, overall weight: 2,850 kg, warranty duration: 12 months, The Kmway EK-Series Wire EDM machine has been developed for users who value accuracy, efficiency, and long-term reliability. Thanks to its compact design, advanced wire threading technology, and robust, thermally balanced construction, it offers the perfect combination of precision and practical application. Why choose the EK-Series? – Next-generation Automatic Wire Threading (AWT): Highly reliable threading system that operates with or without flushing, increases machine uptime, and reduces operator intervention. – Linear Motor Drive: Friction- and backlash-free motion improves long-term cutting accuracy and reduces mechanical wear compared to conventional ball screw drives. – Extremely Rigid One-Piece Frame: Thermally balanced and designed for stability – ensures dimensional accuracy even during long or high-load machining cycles. – Small Footprint, High Performance: Compact design with integrated generator and filtration system, ideal for confined workshop spaces without compromising on performance. – Advanced Filtration System: The improved design allows for a 3 to 5 times longer filter life than conventional systems and enables quick and easy replacement when needed, minimizing downtime. – Operator-friendly Head Design The upper and lower heads are optimized for easy maintenance access, ensuring consistently high output quality with less effort. With decades of experience in the field of electrical discharge machining (EDM), Kmway provides energy-efficient, high-precision solutions that are appreciated worldwide. Technical Specifications: Hfjdpfxey Rk H No Ad Reg Axis Travel (X, Y, Z) mm: 400 x 300 x 220 Axis Travel (U, V) mm: 60 x 60 Maximum Workpiece Size (W, D, H) mm: 725 x 600 x 215 Maximum Workpiece Weight kg: 350 Axis Drive System: Linear Motor for X and Y axes U + V + Z: AC Servo Motors X-Y Axis Traverse Speed mm/min: 1800 Wire Diameter mm: Ø 0.15–0.3 (Standard 0.25) Maximum Taper Angle: ±14.5°/80 mm Machine Weight kg: 2850 Machine Dimensions (W x H x D) mm: 2203 x 2015 x 2435

Year of construction: 1999, condition: ready for operation (used), A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Hedey Nnawspfx Ad Rsfg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. Hedpfx Adoyzw I Io Rsfg The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: good (used), Year of construction: 2001, Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Hedeg Icdyepfx Ad Rsfg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Hfedjwzyvhopfx Ad Reg Z 220 mm U 350 mm V 220 mm Year 2005

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. cooler Hfodpfem Uyuxsx Ad Rjg Automatic wire threading

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: Hfedpfxoxx Nkyj Ad Reg # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Hodpfxjxwmiks Ad Refg Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Hodpfx Adeyxprtj Rofg

Condition: good (used), Year of construction: 2004, Machine is in very good condition. Parts shown by hand not come. Hedpfx Aovkuqtsd Rsfg

Year of construction: 2011, condition: good (used), Additional equipement not included. Hsdpfx Aspxnwzjd Refg

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI. Hfsdoyy Th Ispfx Ad Reg

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 1,934 mm, total length: 1,025 mm, total width: 1,236 mm, workpiece weight (max.): 300 kg, table width: 486 mm, overall weight: 700 kg, table length: 310 mm, For sale: New machine (Other models available upon request) Technical details: Electrode diameter: 0.3–3 mm Drilling depth: 0–300 mm Max. workpiece height: 300 mm Z1-axis travel: 300 mm Z2-axis travel (dual Z-axis): 300 mm Max. machining speed: 60 mm/min Spindle rotational speed: 20–120 rpm Worktable size: 486 x 310 mm Worktable travel: 400 x 300 mm Max. worktable load: 300 kg Max. rated current: 30 A Max. power consumption: 3.5 KVA Control type: Automatic Z-axis Dielectric fluid tank capacity: 30 l Hfjdpfxoy Emu So Ad Reg Machine dimensions: 1236 x 1025 x 1934 mm Digital readouts (DRO): for X, Y, and Z axes Machine weight: 700 kg Standard accessories: 1x Electrode guide: 0.5 mm 1x Electrode guide: 1.0 mm 10x Electrode: 0.5 mm 10x Electrode: 1.0 mm