Used Micro Wizard for sale (824)

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control Kljdpfjy Auxmox Anyeu ä3626

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Kljdpfx Anoytqmmjyou Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter system for outdoor installation 1 x Nesting program on the machine control system Availability: immediately 3626ä

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle 26 kW, up to 40 mm diameter, including 8-position tool changer Kedpfsyay H Ajx Anyslu 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä3626 Availability: May 2026

Condition: used, Year of construction: 2012, CNC laser cutting system Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Kodpox Eh Drefx Anyjlu Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3626

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the portal Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Module "THC" / Automatic height control via arc voltage Kljdpfx Aneudn Rzoyou USB 2.0 connection for storage media Module remote diagnostics MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 burner Power cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma labeling system FineMarker CNC interface for FineMarker / connection to the CNC control Module for the automatic control of the marking device 3626

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Kjdjxl Rgiepfx Anyslu

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Ksdpfsxl Rf Sex Anyelu

Condition: used, Year of construction: 2001, operating hours: 6,023 h, total height: 2,500 mm, total length: 3,500 mm, total width: 2,000 mm, Empty weight: 5.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 00600169 - Operating hours: 6023 Kodpfxsyk Hbno Anyolu - Drive system: CNC - Power [kW]: 15.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 510 - Table length [mm]: 1150 - Table width [mm]: 500 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: Chip conveyor, External cooling, Tool magazine - Transport dimensions: 3500mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, The machine is powered and available for inspection. Kljdoy Eb Rhjpfx Anyou

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Kjdpey Eb N Dsfx Anyolu

Condition: excellent (used), Year of construction: 2008, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 clamping diameter 32 mm spindle turning speed range 7000 U/min workpiece length - max. 150 mm feed 0 - 2000 mm/min weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available Kljdsvwgmyopfx Anyju

Condition: excellent (used), Year of construction: 2007, turning diameter over bed 32 mm spindle passage 32 mm turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 spindle turning speed range 7000 U/min workpiece length - max. 150 mm clamping diameter 32 mm feed 0 - 2000 mm/min Kjdpjxq Hk Ujfx Anyelu weight of the machine ca. 5,7 t dimensions of the machine ca. 10,5 x 2 x 1,9 m The sliding headstock automatic lathe is in good condition and ready for immediate use. with tool holders and spare parts. >> Two identical STAR 32T sliding headstock lathes are available

Condition: good (used), Year of construction: 2007, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Klsdpfx Aeuv Hkgonyeu Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE 3626ä

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 000716, turning length: 130 mm, spindle speed (max.): 8,000 rpm, overall weight: 1,300 kg, bar passage: 16 mm, type 510 j - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control Kljdpswrdxbefx Anyju

Condition: used, PCB handling equipment from E-Flex SMT microsystems WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-330SD0TM-CI (2022) price: €3,604 WHM-301SD3TM-CI (2022) price: €4,518 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 Klodpfx Asx Tzn Ajnyju WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 WHM-201SDNTXL-AI (2022) price: €3,968 WHM-200SD3TM-IA (2022) price: €3,439 WHM-200SD3TM-l (2022) price: €3,738

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Kljdpswhk E Hefx Anyju Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,023 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 8,000 rpm, number of axes: 4, TECHNICAL DETAILS Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Table length: 1,150 mm Table width: 500 mm Tool holder: BT40 Main spindle power: 11 kW Max. spindle speed: 8,000 rpm MACHINE DETAILS Control: CNC Fanuc 18-M Number of axes: 4 Power: 15 kW Klodpfx Ajy Hh Iionyou Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,500 mm Net weight: 5,000 kg Shipping units: 1 Operating hours: 6,023 h EQUIPMENT Chip conveyor External cooling Tool magazine

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Klsdpfju Uic Tox Anyou Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Resolution, C-axis: 0.01 ° Kodsu Uicyspfx Anyelu Turret: Number of tools: 10 of which driven: 10 Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Tool carrier: Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Kodpfswf Aclsx Anyjlu Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: excellent (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 150 mm, sheet thickness steel (max.): 150 mm, table length: 6,000 mm, working width: 2,000 mm, Equipment: documentation/manual, Used Microstep CombiCut 6001.20 for applications up to 150mm structural steel. The system has the following features: Kodpfx Aney Uw Hwjyolu CombiCut gantry, driven on both sides Oxy-fuel cutting torch, acetylene, up to 150mm cutting capacity Piercing, fully automatic Drilling with 10.3kW drilling support Double-sided guided clamping system Drilling up to 30mm diameter Tapping up to M20 Countersinking corresponding to the drilling diameter Including calibration unit for the drilling tools All tools and carriages on the gantry are driven. Conversion to plasma cutting (straight) is possible! Tool changer mounted at the table end for 6 tools, SK40 tool holders (not included) Oxy-fuel cutting table 6000 x 2000mm, designed for sheets up to 150mm Table is cleaned and ready for immediate use (consisting of 2 elements) Table has electronic flap control Connection to a standard filter system is possible; this can be offered as an optional extra. External machine control with 24" monitor Control cabinet mounted on the gantry to minimize cable drag – therefore, very easy to maintain. Guideways: Milled S49 rails with beveled rack and pinion The machine has been fully tested and inspected. All functions are present and ready for use. The system has an Asper (CAM software) license installed and can be connected to the network. Office licenses are not included! We can offer the system with assembly and commissioning. If assembly is carried out by us, the system will be installed with a functional guarantee. Furthermore, if assembly is carried out by AK Industry, the machine will have a 3-month warranty. Inspection possible at any time!

Condition: good (used), Year of construction: 1996, functionality: fully functional, STAR SH-12 CNC long lathe TECHNICAL DATA Turning diameter: 13 mm Kodovllmhspfx Anyelu Headstock stroke: 140 mm Speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the device: 3 Dimensions of the machine: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF OFFER Among other things: (list not exhaustive) STAR SH-12 CNC lathe Bar loader Coolant pump Transformer Exact scope of offer according to photo gallery We accept no liability for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), STAR SR-20R sliding headstock automatic lathe TECHNICAL DATA Kedpfou Hkh Rox Anyslu Spindle diameter: 20 mm turning length: 205 mm Speed range - spindle: 500 - 12,000 rpm Drive power, spindle motor: 2.2 / 3.7 kW Travel X: 265 mm Speed range, counter spindle: 500 - 8000 rpm Drive power, counter spindle motor: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: Linear tool holder, front attachment, rear machining SCOPE OF OFFER U.A: (list not exhaustive): STAR SR-20R sliding headstock automatic lathe LNS bar loader transformer Coolant tray Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Klsdowi Ty Aepfx Anyeu Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Year of construction: 2006, condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available Kodpfel R Ix Ssx Anyelu - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.