Used Mini Mig 105 for sale (5,369)

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Ncjdpjx U A D Ujfx Afzel Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Njdpexbrw Usfx Afzscl

Condition: used, Year of construction: 2023, Seppi M. MINI-BMS 105 / 5-10to / forestry mulcher / CUT CONTROL / DEMO? Device / Year of manufacture: 2023 / in stock & immediately available Price: 14,090.00 ¤ net / 16,767.10 ¤ gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching device for excavator attachment - for mulching along river banks, in forests and other hard-to-reach locations - mulches bushes and woodland up to 10 cm Ø - for excavators of 5-10 tons - for mounting on various attachment plates - drive intended for hydraulic motor depending on the delivery rate of the carrier device - indirect V-belt drive with 5 V-belts - reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - hydraulically adjustable hood - continuous Hinge over the entire length of the hood - Front protection with chains - Rear protection with chains - Support skids, height adjustable, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 hard metal plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - approx. 200 mm high Optional: MS08 adapter plate including screws and assembly = 1,410.00 € net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drainage. A double-acting hydraulic connection is also required for the hydraulic hood. The device is delivered without hoses, connections and mounting plate. Ncodpfx Afsrxpbuszol We are an official Seppi M. sales and service partner and also represent the brands Westtech Woodcracker sales and service partner, DMS sales and service partner, Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Subject to errors and prior sale! Internal number: 170048

Condition: used, Year of construction: 2023, Seppi M. MINI-BMS 105 / 5-10 tonnes / forestry mulcher / CUT CONTROL / DEMO device / rotary motor / year of manufacture: 2023 / in stock & immediately available Price: 18,990.00 ¤ net / 22,598.10 ¤ gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching device for excavator attachment - for mulching along river banks, in forests and other hard-to-reach locations - mulches bushes and woodland up to 10 cm Ø - for excavators of 5-10 tonnes - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the delivery rate of the carrier device - Indirect V-belt drive with 5 V-belts - reinforced Housing made of wear-resistant AR 400 steel Njdpferwuvpjx Afzecl - drop-forged counter blades - hydraulically adjustable hood - continuous hinge over the entire length of the hood - front protection with chains - rear protection with chains - support skids, height adjustable, reinforced with a hard metal plate - color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 hard metal plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 60 - 130 OPT372 hydraulic 190° rotating device OPT158 12V electric valve for opening the rear hood Optional: MS08 adapter plate including screws and assembly = 880.00 € net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drainage. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, connections and mounting plate. We are an official Seppi M. sales and service partner and also represent the brands Westtech Woodcracker sales and service partner, DMS sales and service partner, Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Subject to errors and prior sale! Internal number: 170068

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching head for excavator mounting - Suitable for mulching along riversides, in forests, and other hard-to-reach locations - Mulches brush and wood up to 10 cm diameter - For excavators from 5 to 10 tonnes - Designed for mounting on various adapter plates - Drive designed for hydraulic motor, determined by the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Support skids, height adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required with OPT 372 hydr. 190° rotary actuator Optionally: MS08 adapter plate incl. bolts and installation = €1,410.00 net An independent hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is required for the hydraulic hood. The unit is delivered without hoses, connectors, or adapter plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are happy to provide a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. Ncsdpfxoqhi Ngj Afzel We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale!

Condition: new, machine/vehicle number: mini-bms 105 drehmotor, For enquiries about the attachment, Mr. Herden is happy to assist you by phone. Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotator / MS08 / 5–10 t / CUT CONTROL / NEW / in stock & immediately available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher attachment for excavators - Suitable for mulching along riverbanks, in forests, and other difficult-to-access areas - Mulches brush and woody growth up to 10 cm Ø - For excavators from 5 to 10 tonnes - Compatible with various mounting plates Nodpfx Afoqmc Hhjzscl - Drive designed for hydraulic motor, depending on the carrier unit’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge across the full length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skids, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 – 45 cm³ and overpressure valve - Displacement in cm³ (min–max): 22 – 45 - Required hydraulic pressure in bar (min–max): 150 – 250 - Required hydraulic flow in l/min (min–max): 40 – 100 OPT372 hydraulic 190° slew drive OPT158 solenoid valve for tailgate opening Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for the drive. Three hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, couplings, or mounting plate. Mr. Herden (tel. ...) will be happy to assist you. Financing available upon request. We are official sales and service partner for Seppi M. We are official sales and service partner for Westtech. We are official sales and service partner for Gierking GMT. We are official sales and service partner for OilQuick. We are official sales and service partner for Weber MT. We are official sales and service partner for Holp. We are official sales and service partner for DMS. We are official sales and service partner for Magni Telehandlers. We are official sales and service partner for JCB Construction Equipment. We are official sales and service partner for Mercedes-Benz. We are official sales and service partner for Iveco. We are also one of Germany’s largest commercial vehicle dealers, with 800 used vehicles in stock. We supply the entire Seppi M. product range! Subject to errors and prior sale.

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm Ncsdpfx Afocuwptszsl usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Nedpev Da Dlofx Afzocl

Condition: good (used), JUST IN: 4 PIECES  Scooter / mobility scooter, in good working condition Nedpfx Afsyazc Eszecl

Condition: good (used), JUST IN: 4 PIECES  Scooter / mobility scooter, in good working condition Ncjdpeyay U Tefx Afzsl

Condition: good (used), JUST IN: 4 PIECES  Scooter / mobility scooter, in good working condition Nodpfsyay U Hex Afzjcl

Condition: good (used), JUST IN: 4 PIECES  Scooter / mobility scooter, in good working condition Nedpfx Ajyay Umsfzocl

Condition: used, Technical data for the compensation plate: Manufacturer: Bito, Type PRO Suitable for the L base plate; which is mounted on the rack uprights P1-P3. Scope of delivery includes: 01x Compensation plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Ncedpfxox Tua So Afzel Weight: approx. 0.05 kg | each Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If further transport or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm Nsdpfxjk Aubqe Afzjcl -Weight: 165.5 kg

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package Ncsdpfxechp Awj Afzel

Condition: good (used), Technical data for compensation plate: Manufacturer: Bito PRO Scope of delivery includes: 01x compensation plate, used Suitable for base plate M; Mounted on upright P4-P6 Material finish: Sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center to center): approx. 120 mm Weight: approx. 0.46 kg | pc. Nedpfx Afji Hkngozocl

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: Ncodpfsi Hknysx Afzel 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | pcs.

Condition: good (used), Technical data for the shim: Njdpfx Aji Hknvefzecl Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm Nodpfx Asi Hkn Dofzecl material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito (L) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 120 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 95 mm Nodpji Hkn Iofx Afzjcl Weight: approx. 0.14 kg | pcs.

Condition: good (used), Technical data of the shim: Manufacturer: Bito (M) Nedpfxsi Hknko Afzscl Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | pcs.

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​ Ncjdpfxsxv A Nqe Afzel

Condition: used, This listing is for a VWR Mini Star Silverline Centrifuge Nodpfxsxzhias Afzscl

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Nodpsvx H Duofx Afzecl

Condition: used, New: Yes Please contact us for more information. Nedsx I A Tpopfx Afzjcl