Used Microplate Reader for sale (702)

Condition: used, machine/vehicle number: YS2R6X4000542xxxx, mileage: 562,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21765 Specifications: EU approved until 22.03.2026 Model year: 2016 Mileage: approx. 562,000 km (increasing) Full air suspension Automatic transmission Tires (see photos) Tipping hydraulics Length: 705 cm Width: 255 cm Wheelbase: 330/135 cm Curb weight: 10,500 kg 6x4 581 hp Autoline S90 sand spreaders Rear-view camera Extra driving lights 2x beacon lights Bed Radio/CD Air conditioning Description:Scania R560 6x4 tractor unit from 2016. Equipped with hydraulics for tipper semi-trailer. The truck is EU approved and in daily operation. Mileage will increase slightly. Can be delivered on short notice. See video for details. Km: 562000 HK: 580 Technical approved: Yes EU-approved until: 22.03.2026 Own weight: 10500 Ibjdpfxsxvlb As Ad Dod Total Weight: 30000 Payload: 19500 Width: 255 Length: 705 Euro: 6 Model: R580 6x4 Trekkvogn m/ tipp-hydraulikk SE VIDEO Gearbox: Automatic

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System Ibjdpfsvcnpajx Ad Ded HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,105 h, load capacity: 10,000 kg, lifting height: 18,850 mm, fuel type: diesel, mast type: duplex, construction height: 10,795 mm, power: 168 kW (228.42 HP), empty load weight: 42,990 kg, drive type: Diesel, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: ZF WG211 automatic 5/3 Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires Size: 14.00-24 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 14.00-24 Iedpfxjxv Hbqj Ad Djbd Rear tires Condition: 40 - 60% Elme 584 sidespreader 20ft-40ft with hooks and hydr. clamp for double box lifting, hydr. center levelling of spreader +/-3°, hydr. sideshift +/- 600mm DE: hydr. extendable spreader support device on lift mast, lift suspension by hydraulic accumulator, central lubrication system, automatic speed reduction depending on lift height, mast inclination and whether container is/are clamped, electric motor preheating (230V), one-touch function on joystick for automatic spreader adjustment 20'-40', driver's cab with air conditioning and sun blinds, air-suspended driver's seat with headrest and heating, EN: hydr. spreader support device on lift mast (for safety of container checker), lifting suspension by hydr. accumulator, engine pre-heater (230V), central greasing system, air condition, drive speed limitation depending on lifting height and tilting angle of mast, one touch function on joystick for automatic spreading of spreader 20-40, air-cushioned driver seat, passenger seat, sun blinds at roof and rear windows condition: checked, repaired, serviced and cleaned = ready for work

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. Ibsdsv T Truspfx Ad Dsd - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Year of construction: 2005, Perfect binding line Kolbus ZU 841.A - KM 473 Year: 2005 Ibodpsxd Dm Hjfx Ad Ded Consisting of Gathering machine Kolbus ZU 841.A Year: 2005 Description: - Colour monitor with touch screen - Number of gathering stations: 20 (15 x incl Signalynx bar code reader),( 4 x Optoelectronic signature recognation) - Air center: Variair - Set up element - Transfer into the binder Perfect binder Kolbus KM 473 Year: 2005 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson Durapail - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder: SAL 411.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down delivery Transport system Kolbus Description: - Escape delivery Conveyor tower: 2x Max. mechanical speed: 8.000 cycles/h Maximum size range: 383 x 320 x 70 mm Maximum size range: 460 x 190 x 70 mm Minimum size range: 105 x 100 x 3 mm

Condition: good (used), Programming cart KP-Qume QVT52 III consisting of: Iedpfoivd Eaex Ad Dsbd Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35,5 cm) Picture tube flat, white phosphor Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Character display - 80 characters: 14 x15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Frame rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM code page 437/850 Screen saver yes, adjustable times Memory depending on emulation 4 or 7 screen pages Keyboard New ASCII (N.A.), different languages, 20 + 1 function keys programmable Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38,4kB / 1x Host RS232, DB25 / 1x Printer RS232, DB9 / Data flow control: Xon/Xoff, DTR or none / Option: RS422 or Current Loop Data format 7 or 8 bit / even,odd or no parity / parity check on or off / 1 or 2 stop bits Transmission mode full or half duplex / block Printer interface 1x serial, RS232 DB 9 Power supply 95 - 264 VAC, 47 - 63 Hz Power consumption (max.) 24 W Other hardware Bosch disk reader FDS 514 Bosch PDV control unit Bosch Handheld HBG 2 incl. trolley and various data cables Item condition: used Complete factory closure, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, mileage: 3,600 km, Year of construction: 2024, Serial number: W1T9640261077xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21413 Specifications: Km: 3600! Transmission: Automatic Suspension: Steel front, air rear Euro 6, 428 hp Retarder 6x2 VDL hooklift system 20T hook (no bend) Remote control Sand spreaders Good tires Toolbox New chains Factory warranty on engine and drivetrain Radio/CD Climate/AC Ready for delivery Description:As good as NEW Mercedes hooklift truck from 2024.The truck has only driven 3600 km.Hook container can be included for an additional cost.Ready for delivery. Km: 3600 HK: 428 Ibedpfx Ajxf Tarjd Dod Technical approved: Yes EU-approved until: 29.08.2026 Own weight: 11330 Total Weight: 28000 Payload: 16595 Width: 255 Length: 859 Euro: 6 Model: Arocs 2543 Gearbox: Automatic

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Ibsdpoxw Ux Hefx Ad Djd Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,595 h, load capacity: 10,000 kg, lifting height: 18,800 mm, mast type: duplex, power: 185 kW (251.53 HP), Empty container handler Load center: 1220 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Super elastic Front tires size: 14.00-24 Front tires condition: 60 - 80% Rear tires type: Super elastic Rear tires size: 14.00-24 Rear tires condition: 40 - 60% electrical pre-heating for engine and driver's cabin central greasing system hydraulic center levelling of spreader +/-3° Ibsdpoxv Ha Tsfx Ad Dsd wheel nut protection on steering wheels additional working lights: 4x on cab roof, 2x on mast driver's cabin with electronic air conditioning air-suspended driver's seat with heating and seat belt rear view camera joystick control

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Ibjdod Etadspfx Ad Dod Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: new, 1. steel roller diameter (mm) 120 2. Rubberized working roller diameter (mm) 160, 455h Sanding belt (mm) 1120 x 2200, 1 piece per sanding unit Main engines (kW) 2 x 11 (15 HP) Motorized table stroke - Work piece height (mm) 3 - 160 Automatic star/delta starting of the motor Sanding roller lifting for 1st unit from the front control panel - pneumatic Sanding roller lifting for 2nd unit from the front control panel - pneumatic Pneumatic grinding shoe PL 2 Amperemeter - for measuring the current of the motors of the grinding units Sanding belt oscillation control - with the help of an optoelectronic reader with infrared beam Ibedpfx Aefhmgcod Djd Automatic feed belt centering Table Positioner Electronic measurement of the table position with digital display Frequency converter of the feed belt speed (m/min) 3 - 15 Rubberised pressure rollers Emergency-off pneumatic disc brake of the main engine Mechanical limitation of the maximum chip removal of the workpiece Noise protection Power supply 400 V/50 Hz Machine built to CE power and safety standards Additional equipment on request

Condition: excellent (used), mileage: 51,796 km, power: 149 kW (202.58 HP), first registration: 10/2007, axle configuration: 4x4, next inspection (TÜV): 11/2026, Year of construction: 2007, operating hours: 3,959 h, Mercedes-Benz Unimog U400 / Road-Rail / Rail / Track / Rails / Mulag • Manufacturer: Mercedes-Benz • Model: U400 • Mileage: 51,796 km • Operating hours: 3,959 h Isdpfx Asxf Iphjd Djbd • First registration: 10/2007 • Power: 149 kW / 202 hp • Drive configuration: 4x4 • Transmission: Manual gearbox • Unladen weight: 11,920 kg • Perm. total weight: 12,500 kg • MULAG mower: Type ME 700 • Schmidt salt spreader 2.4 m³ • Mulag snow plough • DÜCKER front-mounted sweeper • Clearing width: 2,400 mm • Max. rotational speed: 250 rpm • Municipal hydraulics • Next general inspection: 11/2026 • German vehicle • German registration documents • Immediately operational • This offer is non-binding and subject to change without notice. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale in accordance with our General Terms and Conditions.

Condition: used, mileage: 520,000 km, Year of construction: 2012, Serial number: YS2R6X4000207xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15461 Specifications: - Km: 542 000 - Gear: Automatic - Retarder - Suspension: Steel - Euro 5 - Okay tires - Snowrigged - Prepared for spreader - 6x4 - Extra light - Rotor beam - Light bulb - Trailer hitch - VBG - Replaced clutch and gearbox earlier Ibsdpovg Nxqsfx Ad Dsd - Bed - Radio/CD - Climate/AC - Service history Description: Scania R560 6x4 Tipper from 2012. The truck is snowrigged and ready for spreader. Replaced clutch and gearbox earlier.  Ready for delivery. Km: 520000 HK: 560 Technical approved: no EU-approved until: 28.09.2024 Own weight: 13720 Total Weight: 27000 Payload: 13205 Width: 255 Length: 750 Kw: 412 Euro: 5 Gearbox: Automatic

Condition: used, This listing is for a Biotek Instruments Vacuum pump 2 x 2 The unit is in full working condition and is ready for immediate release. BioTek Instruments GAST Vacuum Pump 7103034 Overview The BioTek Instruments GAST Vacuum Pump 7103034 is a high-performance, oil-less rocking piston compressor and vacuum pump designed for use with a variety of microplate washers, including the EL 406, 405 TS, 405 LS, and ELx405. Key Features Standard Vacuum Pump: Ideal for a wide range of applications. Oil-less Rocking Piston Compressor: Ensures outstanding performance and durability. Flexibility and Durability: Suitable for various laboratory settings. Easy to Retrofit: Simple installation and integration with existing systems. Low Exhaust Temperatures: Reduces the risk of overheating and extends the pump's lifespan. Longer Life Span: Built to last, minimizing the need for frequent replacements. Voltage: Operates at 115-230V. Max Vacuum: 26 in -hg. Ibodpfx Asxwc I Nsd Dod Sound Level: Less than 65 db(A). Product Information Compressor Type: Standard Vacuum Pump Port Size: 1/4 in NPT End Connections: NPT Phase: Single Maximum RPM: 1725 RPM; 1425 RPM Minimum Working Temperature: 5°C Maximum Working Temperature: 40°C Standards: CE; UL For Use With: 405 ls, 405 touch, el406, elx405 microplate washers Voltage: 115 - 230V Sound Level: Less than 65 db(A) Max Vacuum: 26 in -hg Specifications Weight Metric: 11.34 kg Imperial: 25 lb Dimensions Metric: 35.56 cm x 25.4 cm x 33.02 cm Imperial: 14 in x 10 in x 13 in Harmonized Code: 84141000 Harmonized Code Details: Vacuum pumps; liquid ring vacuum pumps and other rotary positive displacement pumps Availability eBay: This vacuum pump is listed on eBay with free shipping for many products. Sellers typically respond within 24 hours to assist with any inquiries or specific configurations.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 15,560 h, load capacity: 9,000 kg, lifting height: 16,450 mm, fuel type: diesel, mast type: duplex, power: 164 kW (222.98 HP), empty load weight: 37,500 kg, drive type: Diesel, construction width: 4,120 mm, Empty container handler Load center: 1219 Mast type: Duplex Transmission: Dana TE17000 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Ibodpfsxubbvox Ad Ded Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 20-40ft telescopic spreader Elme model 584LD with MPS

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Ijdpfx Aded Etagj Dsbd Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, overall weight: 9,000 kg, mileage: 1,001 km, empty load weight: 1,400 kg, maximum load weight: 7,600 kg, loading space volume: 4 m³, driver cabin: other, Vehicle location: Bovenden, Ibsdpfjxxmqwex Ad Dsd Body: demountable salt spreader approx. 4 m³, removed from Daimler-Benz SK 1928 A 4x4! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted!

Condition: good (used), Year of construction: 2017, operating hours: 3,352 h, load capacity: 3,500 kg, lifting height: 4,590 mm, fuel type: electric, mast type: triplex, construction height: 2,175 mm, mileage: 3,352 km, This TRIPLEX electric forklift from STILL is from 2017 and is in good condition; Capacity 3,500 kg; Lift height 4,590 mm; Overall height 2,175 mm; Forks 1,200 mm; Equipped with FREELIFT and SIDESHIFT; Comes with FORK SPREADER; Only 3,352 operating hours; Battery equipped with automatic filling system and external charger! Video to follow. Isdpfsxr Dquox Ad Djbd

Condition: used, mileage: 150,000 km, Year of construction: 2019, Serial number: YS2P6X2000556xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21679 Specifications: EU approved until 21.11.2025 Model year: 2019 Mileage: approx. 150,000 km Opticruise Tires (see pictures) 2019 Joab body Remote control for body Autoline C50 sand spreaders Fuel type: Gas Euro 6 Length: 874 cm Width: 255 cm Wheelbase: 435/135 cm Curb weight: 14,200 kg Max payload: 13,725 kg 6x2 340 hp Rear-view camera LED bar Bed Radio/CD Climate control/AC Description:Scania P340 6x2 skip loader from 2019.Equipped with Joab body with space for two containers.Regularly serviced.Delivery by agreement.See video! Km: 150000 HK: 340 Technical approved: Yes Isdpfxexr Tw Ds Ad Djbd EU-approved until: 21.11.2025 Own weight: 14200 Total Weight: 28000 Payload: 13725 Width: 255 Length: 874,2 Euro: 6 Model: P340 6x2 Liftdumper m/ Joab påbygg SE VIDEO Gearbox: Automatic

Condition: used, This listing is for a Eppendorf Concentrator AG The unit is in full working condition and is ready for immediate release The Eppendorf Concentrator plus is a benchtop device designed for the efficient and gentle vacuum concentration of DNA, RNA, nucleotides, proteins, and other liquid or wet samples. It features advanced heating technology and a chemical-resistant, maintenance-free PTFE diaphragm pump, eliminating the need for oil changes. The system offers versatility with a wide variety of rotor options to accommodate tubes from 0.2 mL to 50 mL, as well as microplates and PCR plates. Key Features Motorless drive and sealed chamber for trouble-free operation Whisper-quiet operation (60 dB), even with the pump on, for a pleasant working environment Automatic vacuum release prevents sample bumping or foaming Integrated brake mode for a faster rotor stop and quicker access to samples Three evaporation modes (aqueous, alcohol, and off) Four heating levels (30°C, 45°C, 60°C, and ambient) to match sample and solvent needs, reducing processing time System Options Basic System Includes the Vacufuge Concentrator and a 48 x 1.5 to 2.0 mL rotor AC receptacle for external vacuum pump connection Ijdpfx Asxv D D Ned Dobd All pump functions, including vacuum release and evaporation modes, are controlled by the concentrator

Condition: used, Year of construction: 2007, 2007 5 colours + coating 53 x 74 cm 16,000 sheets/h Serial no. 524 58 million impressions Roland high-performance single sheet feeder Patented Roland suction belt table EPL – semi-automatic plate change Roland Select cleaning station Quick Change Surface Isdpfx Aexni Ecjd Djbd Roland RCI Roland Deltamatic dampening system Roland SelectDampeningStation Roland AirGlide PressPilot Basis Grafix Digital-L 3000 Technotrans alpha Grafix powder unit Grapho Metronic tempering system Premium Operation Comfort Premium Control Desk Premium Format Change Printnet preparation JobCard Reader Location: Germany Availability: immediately

Condition: used, This listing is for a Thermo Scientific Heat Block The unit is in full working condition and is ready for immediate release The Thermo Fisher Heat Block – Dry Bath is an advanced and versatile laboratory device designed to meet a variety of heating needs in research, clinical, or industrial applications. This digital dry heater offers precise control over temperature and time, making it ideal for experiments that require consistent and uniform heating. Key Features: Dynamic Temperature Stability: This heat block provides excellent temperature uniformity of less than ±1.0°C and temperature accuracy of less than ±0.5°C at 37°C, ensuring reliable and reproducible results. Proportional-Integral-Derivative (PID) Controller: The PID controller offers precise control over the heating process, allowing users to select specific temperatures and times. The system also enables fast heat-up for samples, optimizing workflow and reducing wait times. Wide Temperature Range: Temperatures can be set in 0.1°C increments, ranging from ambient +5°C to 130°C, making the heat block adaptable for a wide range of applications. Programmable Timing: The heat block includes a programmable timer that can be set for up to 99 hours and 59 minutes. This feature allows users to run multiple processes without needing to monitor the heating continuously. Interchangeable Blocks: The Thermo Fisher Heat Block is designed for flexibility, with interchangeable blocks that can accommodate various tube sizes, vials, and microplates. This makes it suitable for a broad range of lab applications. Ibjdoxv D A Ejpfx Ad Ded Digital Interface: The heat block features a user-friendly digital interface, making it easy to set and adjust the temperature and time. Reliability for Multiple Applications: These dry baths are an excellent choice for labs needing a sophisticated, reliable heat block for applications like PCR, enzyme digestion, sample incubation, and more.

Condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Ibsdpfsxv Dz Iox Ad Dod Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: used, This listing is for a Grant Instruments QBD2 Heatblock. The unit is in full working condition and is ready for immediate release. The Grant QBD / QBH series are a versatile range of high quality digital dry block heating systems with excellent temperature control and a wide choice of interchangeable blocks for maximum flexibility. The outstanding performance of the QBD / QBH series is based on advanced digital temperature control combined with high quality, precision-engineered blocks providing excellent thermal contact. The result is accurate, reproducible and safe heating of your samples. There is a full range of models and options to cater for basic through to more sophisticated applications - choose from three digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and one digital high-temperature system (QBH2) with 2 blocks. These are complemented by an extensive range of interchangeable heating blocks to accommodate your sample tubes - from our standard range of blocks or tailored to suit your application. In addition, for 2-block systems QBD2 and QBH2 we offer accessory blocks for accommodating microplates and microtube strips. Heating range ambient + 5°C to 130°C (all three QBD models) or ambient + 5°C to 200°C (QBH2). - Rapid heat-up time. Ibsdpfexv Dwpex Ad Djd - Stability and uniformity ± 0.1°C. - Integral timer function optional external probe for in-sample or in-block temperature control. - Robust, compact, contemporary design. - Block extraction tool included as standard, for easy and safe removal of blocks.

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Number of Channels: 12 Volume (Metric): 30 to 850 μL Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Applications Ideal for applications requiring high precision and reproducibility, such as: Isdpfjxv Di Eox Ad Debd Genomics and proteomics Microplate assays Cell culture and drug discovery High-throughput screening