Used Mikron Vce 750 for sale (187)

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, Bodstz Sqhjpfx Agzowg coolant

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Bjdpfx Agst I T N Eszewg Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Payment: As is customary for used machines, net before removal.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Bwodpfx Aget Hw D Rezeg Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Heidenhain Active - Digital Display Stepless feed Lamp Cooling device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Bsdpfjcmzzgjx Agzjwg feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Control unit TNC 426 Bedpfsuzimnjx Agzjwg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 621, Multi station Electrode Holder prepared for Erowa holders - 48 Positions - Made by Mikron Unit was fully integrated and working with a CNC Milling Machine Mikron HSM400U Bwedjwhfl Ijpfx Agzjg

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Bjdpfx Agsvxwuwozswg Machine can be inspected under power

Condition: new, Year of construction: 2025, Scrap Grapple, Scrap Grab, Multi Tine Grab for Scrap Capacity 0.6 m3 Model 5 Tinned Hardox 450 Wearing Plates Rotating Option Bsdpfxjxryrbs Agzowg

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW Bwedpeu U Sabjfx Agzeg weight of the machine ca. 1,5t t

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Bjdpfx Agoi El Iaezewg Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested !

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Pallete changer EROWA not come. Bedpfx Agsm Dtnrezowg

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Bodpexcxz Nofx Agzjwg

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Bwedpfx Agsg Nw Rzjzog

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHB5202500000156, Scrap Grab for Terex Fuchs, Sennebogen, Liebherr Bwsdoxryn Aopfx Agzeg 5 Tinned Model 500 Liters Capacity

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm Bjdpfx Agjt Hwxbjzowg gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Bedpfx Agjwit Rhezswg Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz Bodpetv Ia Tefx Agzjwg power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Bsdpfoh Tnpxex Agzowg

Condition: used, EQUIPMENT - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl Bodpfx Agsuhbqpezewg - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: MHG5202500000125, Orange Peel Grapple for Scrap Capacity 600 Liters Model 5 Tinned Gross Weight 1150 KG Bsdpjxrymxofx Agzewg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 22, The value of the supplied spare parts is approximately €70,000. TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: Unlimited Remote Diagnosis: Available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: Parallel to main time, manual, with 3-axis handling or robot Parts Feeding: Paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Bwodpfoxamh Ejx Agzjg Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-Axis: 1,000 rpm Rotational Speed C-Axis: 500 rpm Acceleration B-Axis: 52 rad/s² Acceleration C-Axis: 90 rad/s² Torque B-Axis clamped: 1,000 Nm Torque B-Axis unclamped: 287 Nm Torque C-Axis clamped: 300 Nm Torque C-Axis unclamped: 187 Nm Working Spindle Tool Interface: HSK 40-A External Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Activation: pneumatic, 6 bar Tool Changer Tool Discs: externally pre-loadable with position coding, diameter Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with free adjacent position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. Total Tool Weight on Disc: 15 kg Positioning time per tool step: 250 ms Tool Holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Bodowiucfopfx Agzswg Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Bodpfow Sxyxsx Agzowg

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Bedpfxouhbxae Agzewg EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Model: 4 Tinned - Half Closed Gross Weight: 450 Kg Bwodsnziblspfx Agzjg