Used Mikron Vce 1250 for sale (191)

Condition: good (used), Year of construction: 2018, operating hours: 3,575 h, machine/vehicle number: 108.008.00.0055, total height: 3,417 mm, total length: 4,680 mm, total width: 4,471 mm, table width: 850 mm, table length: 2,100 mm, overall weight: 19,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 1,010 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron VCE 2000 Pro * 3-axis machining center * X-axis travel: 2000 mm * Y-axis travel: 900 mm * Z-axis travel: 800 mm * Table size: 2100 × 850 mm * Maximum table load: up to 3000 kg Dcodpfoz Nh R Eex Ak Asp The machine features the following technical equipment: Control system: Heidenhain TNC 620 Spindle speed: 10,000 rpm Tool holder: SK 40 High-pressure pump: 20 bar Tool magazine: 30 positions Preparation for a 4th axis The machine is located in Eschweiler.

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery Dcedpfxs Ahrm De Ak Aep only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Mikron VCE1000 pro Machining Center Year of manufacture: 2016 Control system: Heidenhain TNC 620 X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Tool magazine: 40 positions Dcedpfx Ake Afn Egs Aep Maximum spindle speed: 16,000 rpm Spindle taper: HSK63 Table dimensions (mm): 1000 x 560 Machine equipped with Heidenhain linear scales on the XYZ axes Tool probe: Renishaw OMP40-2 Through-spindle coolant (IKZ) High-pressure pump with paper filter Chip conveyor Spindle operating hours: 7254 hours

Condition: excellent (used), Year of construction: 2013, operating hours: 10,326 h, functionality: fully functional, machine/vehicle number: +.1035, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, overall weight: 4,800 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 10,326 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Mikron VCE600Pro Dedpfxjz Sagls Ak Aocp Excellent condition!! Year of manufacture: 2013 Spindle hours: 10,326 Control system: Heidenhain iTNC530 DXF file import Handwheel Travel distances: X-axis: 600 / Y-axis: 500 / Z-axis: 540 Spindle: SK40 with 14,000 rpm 24-position tool changer Regulated spindle cooler IKZ internal cooling Band filter Air cooling through the spindle Spray ring for spindle ISO/BT 40 Direct measuring system / linear scales Tool - laser measurement Renishaw 3D probe Renishaw OMP40 Chip conveyor Top condition / without the vises shown in the pictures.

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 600 mm Travel distance Y :500 mm Travel distance Z: 540 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: SK40 Dcodps Adz Hnjfx Ak Aop spindle revolutions: 14000 rpm Speed range to: 14000 U/min tool changer: 24 - time spindle cooling chip conveyor control Heidenhain - DXF file import - Electronic handwheel - Through-spindle coolant (IKZ) - Belt filter - Air cooling through the spindle - Spindle spray ring - Direct measuring system / linear scales - Renishaw laser tool measurement - Renishaw OMP40 3D touch probe - Documentation / manual - Very good condition - Without the vises shown in the pictures

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM Dodjy Tvw Eepfx Ak Ascp TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 620 mm, table length: 700 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, MIKRON VCE 600PRO VERTICAL MACHINING CENTER, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN iTNC 530 ELECTRONIC HANDWHEEL TRAVELS: X 600, Y 500, Z 540 MM TABLE SURFACE: 700 x 620 MM 24-TOOL RANDOM TOOL CHANGER SPINDLE AT 10,000 RPM, 18 KW SPINDLE COOLING DUAL CHIP CONVEYOR LINEAR SCALES Dcedpfx Akey Tvr Ns Asp INTERNAL COOLING AT 18 BAR TOOL MEASURING PROBE

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Dcedsxnprvepfx Ak Asp For further information or contact details, please visit our website.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, CNC Vertical Machining Center MIKRON VCE 800 W Pro With Heidenhain iTNC 530 path control system Year of manufacture: 2004 Travel ranges: X 800 mm, Y 500 mm, Z 540 mm Djdpfxsz Dwmdo Ak Aocp Spindle speed range: 30 – 10,000 rpm, stepless (SK 40) Including the following accessories: Fixed angular table, 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine slots (SK 40) Full enclosure with sliding doors and interior lighting Direct path measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip flushing gun Signal lamp Spiral chip conveyor Coolant system Operating manuals

Condition: excellent (used), Year of construction: 1997, Mikron HAAS VCE1000 vertical machining center Year: 1997 Dcjdez Tlhcjpfx Ak Aop Axis X travel 1016 mm Axis Y travel 508 mm Axis Z travel 635 mm Table width 457 mm Table length 1220 mm Type of CNC HAAS Spindle taper ISO 40 Max. part weight on table 1575 kg ATC Number of tool pockets 20 Max. spindle speed 7500 rpm Machine dimensions length 3530 mm height 2985 mm width 2450 mm weight 5500 kg Accesories/options: - Chip conveyor - Through spindle coolant - Prepared for 4.axis ( drive and wiring included ) - Renishaw touch probe - Renishaw TS27 tool measuring In very good condition, came from a Swiss tool shop.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Dsdpfeqi Ufxox Ak Ascp

Condition: good (used), Year of construction: 2005, functionality: fully functional, 1 x used milling machine Mikron VCE800W+ With tool changer Year of manufacture: 2005 Control system: iTNC530 Operating hours: Control system on: 64541 Machine on: 50689 Program run: 16613 Drives on: 30507 Spindle will be replaced Work table: x / y / z = 860 / 560 / 600 mm Dedpfxez Dpgvj Ak Aecp Travel ranges: x / y / z = 860 / 560 / 600 mm Equipment: Internal cooling Coolant system Sold as used, with no warranty of any kind.

Condition: ready for operation (used), Year of construction: 2019, X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much. Dcedjv Hndfepfx Ak Aep

Condition: good (used), Year of construction: 2007, Machine is in good condition, Dcjdpewk Nm Isfx Ak Asp Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: excellent (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,690 mm, total length: 2,230 mm, total width: 2,360 mm, load capacity: 340 kg, mount diameter: 200 mm, rapid traverse Z-axis: 1 m/min, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, spindle speed (max.): 7,500 rpm, spindle speed (min.): 10 rpm, Micron VCE 750 – Despite its age, the machine is in excellently maintained condition and has only been operated in single-shift use. Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1993 Control: Mikron CNC (Haas) Travel: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 tools Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Worktable: 356 x 914 mm clamping surface Max. table load: 340 kg Dcsdpfxep Sq Tre Ak Aep Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories Dcjdjzbrrtepfx Ak Asp MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 0144, functionality: fully functional, operating hours: 17,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Work spindle speed: 30 - 8,000 rpm Tool holder: ISO B 40 Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load capacity: 1,700 kg Control system: Heidenhain iTNC 530 Feed rate X / Y / Z: 3,000 mm/min Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Dcjdpfx Asx Trpqek Asp Weight: 8,000 kg Operating hours Control on: 44,842 h Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Spindle on: 17,716 h

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories Dodpfxsn Hqa Tj Ak Ascp MARCELS MASCHINEN CH

Year of construction: 2018, condition: used, Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 Dcodpfx Aorcnmzsk Ajp -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, controller model: Heidenhain TNC 430, TECHNICAL DETAILS Travel in X-axis: 710 mm Travel in Y-axis: 550 mm Travel in Z-axis: 500 mm Table dimensions: 900 × 600 mm Table load capacity: max. 1,600 kg Spindle speed: 18,000 rpm Spindle mount: SK 40 MACHINE DETAILS Dsdo Ah H Ilepfx Ak Aocp CNC control: Heidenhain TNC 430 Machine weight: approx. 10,000 kg EQUIPMENT High-pressure coolant system High-speed spindle

Condition: like new (used), Year of construction: 2016, operating hours: 4,000 h, functionality: fully functional, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,000 h, number of slots in tool magazine: 38, Note the low operating hours. This machine is in very good condition and comes with many accessories. Dcjdpfj Afzgwjx Ak Asp

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. Dodpjz Dx Shefx Ak Aocp High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC Dsdpfxoy Tv Nbe Ak Ajcp MACHINE WEIGHT: 19,000 KG

Condition: good (used), Universal tool milling machine Mikron WF 2 Manufacturer: Mikron Type: WF 2 Machine category: Universal tool milling machine Spindle speeds: 12 Speed range: 50–2240 rpm Spindle speed step: 1.4 Feeds: 18 Feed range: 8–400 mm/min Feed step: 1.25 Rapid traverse rate: 1400 mm/min Milling spindle motor: 2-speed, 1.2/1.8 kW at 1400/2800 rpm Feed motor: 0.55 kW at 1400 rpm Coolant pump motor: 0.1 kW at 2800 rpm Longitudinal travel X: 420 mm Transverse travel Y: 250 mm Vertical travel Z: 335 mm automatic / 340 mm manual Vertical travel with optical measuring system: 300 mm automatic / 310 mm manual Clamping surface of fixed angle table: 250 × 700 mm Machine weight with vertical milling head and angle table: approx. 770 kg Weight with all accessories: approx. 1250 kg Position indicator: digital for X/Y/Z Dcedpfxezw U Nfs Ak Ajp Machine vice: included Tool holders and collets: extensive range of accessories available Operating manual: included No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Tool magazine: 30 positions Chip conveyor Handwheel Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg Dcjdpez Uxiijfx Ak Aop In very good condition / without clamping devices! Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.