Used Milling And Drilling Machine for sale (70,100)

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Nsdpofbt Husfx Ahfocu Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. engine power 2.2 kW Ncodpoiduhzjfx Ahfeu air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box Nodpfxexapdcs Ahfocu  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: good (used), - MK3 - Variomat (continuously variable speed control) - Table dimensions: 670 × 290 mm Ncsdpfx Ahoza Sursfou - Digital display on the X-axis - Cooling system - Lighting - 380V

Condition: used, Application: Woodworking Nodevy Apispfx Ahfocu Diameter: Various Weight: 12 kg Length: Various Shank: Various As-new, unused, sharpened, and used shank cutters and drills for CNC machines as exemplarily shown.

Condition: good (used), Year of construction: 2008, CNC MILLING MACHINE Manufacturer: FEHLMANN (SWITZERLAND), Type: PICOMAX 55 CNC 2/3, Year of manufacture: 2008, Nsdpfx Ahezabv Eefscu with quill, Control system: HEIDENHAIN 520, x/y/z travel: 500/255/160 mm, rotary axis (w-axis) travel: 500 mm, Table size: 885 x 320 mm, Spindle speed: 7100 rpm, Hydraulic tool change system: SF 32, Low operating hours.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Nedpfx Aeytpl Ushfecu Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2018, I sell the throughfeed CNC drilling machine MAGGI Boring Evolution 1000 Router, Year 2018. New machine from showroom ! Configuration: Milling head motor 3,3kW / 24.000 rpm 11 + 4 + 2 pcs. drilling units Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2200 x 1400mm / Only 3m2 Total weight: 1350 kg. Nodpfx Ahoy U Er Usfscu With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2018, I sell the throughfeed CNC drilling machine HIRZT Imaco MAGGI Unica F12, Year 2018. New machine from showroom ! Configuration: Ncsdpfx Ahey U Eluofju Milling head motor 2,2kW / 18.000 rpm 14 + 6 + 2 pcs. drilling units Grooving saw 1 pc. Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Max. Working width 1200mm Max. Element thickness 40mm Total area covered: 2600 x 1300mm Total weight: 1650 kg. With full documentation and CE. Tools included and programmed. Very good condition. Available immediately.

Condition: excellent (used), Rapid radial drilling machine / Radial drilling machine / Drilling machine (used) Manufacturer: Mikrosa Ncedpfx Ahey Skrzofeu Year of manufacture: 2001 Type: SRB 35 Drilling capacity: - Steel: 35 mm - Cast iron: 40 mm Thread cutting: - Steel: M20 - Cast iron: M24 Spindle taper: MK 4 Spindle speed: 20 – 2800 rpm, infinitely variable Automatic feed: infinitely variable Spindle stroke: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Connected load: 7.8 kW Space requirement: approx. width 1250 mm, depth 2100 mm, max. height 2700 mm Weight: approx. 2000 kg Hydraulic clamping Thread cutting device Depth stop Lateral clamping surface Drill chuck 2 gearbox stages The machine is in very well-maintained condition, runs very smoothly, and is ready for immediate operation. Forklift available, free loading on truck. Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Carrier machining Ncjdpfxjv Iamzo Ahfou

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Ncedpfsyvh Hqex Ahfsu Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Included accessories: - 20-piece set of packing plates - RTE 165 rotary table - SPW 12 58-piece clamping tool assortment - 4x SE55 leveling feet with vibration dampers - MK4/M16 ER32 3-20 mm collet chuck set Heavy, robust cast construction High smoothness due to ground gears running in an oil bath Forward and reverse operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ± 45° Massive dovetail guide of the column, hand-scraped, for maximum stability and precision Height-adjustable, large protective screen with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy-duty, large cross table, precisely machined surface with T-slots and adjustable gib strips Solid cast machine base with chip tray Single-speed quality industrial motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speed ranges SIEMENS SINAMICS V20 frequency inverter Dimensions and weights: Length approx. 1,600 mm Width/Depth approx. 930 mm Height approx. 2,110 mm Weight approx. 495 kg Nedpfxjyxyivo Ahfecu Drilling-Milling Head: Drilling-milling head tilt range ± 45° Drilling-Milling Capacity: Maximum face mill size: 63 mm Maximum end mill size: 26 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table: Length: 800 mm Width: 240 mm Distance vertical spindle to milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant System: Coolant pump(s) drive rating: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel Range: X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical Spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M16 Quill diameter: 75 mm Quill travel: 120 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 3010164, Offer 25462 Technical Data: - Drilling capacity in ST 37 up to 32 mm - Drill spindle mounting with drawbolt thread M 12 / MT 3 - Drill spindle speeds: 120 to 1600 rpm - Drilling unit height adjustable via hand crank - Maximum distance table / drill-milling spindle: 650 mm - Drill spindle stroke with fine feed via handwheel: 130 mm - Drill spindle outreach: 205 mm - Drill-milling unit rotatable 360° - Coordinate table with 3 T-slots: 730 x 210 mm - Table travel: X-axis 250 mm / Y-axis 200 mm - Drive: 400 V / 1.5 kW - Space requirement: approx. W 1150 x H 1100 x D 1100 mm Nodpfx Aey Nabashfecu - Weight: approx. 270 kg

Condition: good (used), Table size 420 x 250 mm. Speeds: electronically controlled, stepless via potentiometer, 132 - 4500 rpm. Ncjdpfjyywn Esx Ahfeu

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet Ncodsyxy Swepfx Ahfeu - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Ncjdpfx Ajywgtxohfsu Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: new, WMD20LV - 230V / 1P Drilling capacity in steel ----- 20 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- brushless 750W Spindle speed, continuously variable, 50 - 3000 rpm Spindle travel ----- 50 mm Spindle mount ----- MK2 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 150 KG STANDARD ACCESSORIES * Drill chuck incl. drill bit holder * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTION Ncsdpfoh S E Sbjx Ahfeu * Base cabinet € 249.00 excl. VAT

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools Nsdpfjga T Eisx Ahfocu OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Ncsdpfx Ahsv N Uyrjfou Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame

Condition: new, Special offer price for in-stock items! Only while supplies last! Price net from warehouse, free loading. The machine does not include a base. The BF3 Deluxe base is available separately under article number 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Maximum cutter head milling: 80 mm Overhang: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Tilting milling head: -90° to +90° Distance spindle / table: 60 - 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without base Features: - Simple and quick speed change via gear selector switch - Versatile applications such as drilling, milling, threading, etc. - High smoothness due to ground gears running in an oil bath - Right and left-hand operation for threading - Quill adjustment via handle, fine adjustment via handwheel - Dovetail guide for x, y and z axes, adjustable via wedge strips - Tilting milling head on both sides for angle drilling, milling chamfers, etc. - Solid, large cross table, precisely surface-treated - Optimal price-performance ratio for the cost-conscious user Nsdpfodh Hbcjx Ahfscu Scope of delivery: Quick-change drill chuck 3 - 16 mm / B 16 Drill chuck arbor MK 4 / B 16 Draw spindle M 16 Reducing sleeve MK 4 / 3 Combination milling arbor MK 4 / 27 mm Height-adjustable guard Threading device LED machine light Digital quill stroke display Slotted guard Longitudinal measuring scale Operating tool

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Njdor D T Uyjpfx Ahfscu Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: excellent (used), Digital display Heidenhain Type: conventional Table KS 320 D Clamping surface: 530 x 270 mm Ncedpfx Asyv Af Ujhfou Speed: 125 - 4400 rpm Feed: 0.03 – 0.40 mm/rev Drilling capacity in steel: 22 mm Thread cutting up to M16 Milling capacity in steel: 25 mm Drill spindle stroke: 120 mm Spindle motor power: 0.51 / 1.47 kW Dimensions: 2000 x 1200 x 1000 mm Weight approx. 900 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : Nedpfx Ahoukf Ncofocu We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 Njdpfx Aoyu Snzshfecu >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.