Used Milling Copier Deckel for sale (694)

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck Dcodpfoym Rk Sox Affsf

Condition: good (used), Year of construction: 1969, Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm Dcedsidckfjpfx Affef longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 Dcedpsyxxyyjfx Affef - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm Dedpfx Afjx Ndbqofjcf z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 450 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110 deg.; C-Axis 360 deg. Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed 20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Dsdpfx Asyyy Iheffecf Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: Dcedoyyv Rlspfx Affef CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, control Dialog 4 x-travel 400 mm y-travel 315 mm Dcsdpoyyqp Ajfx Affof z-travel 400 mm spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm turning speeds 40 - 2.000 U/min tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject Dcjdpfx Afeyyqpvsfsf to prior sale!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Machine-Details: Stock-No. 1022-2416 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: Dcjdpeyx D Ivofx Affjf * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 1989, functionality: fully functional, Machine-Details: Djdjyx D Enepfx Affocf Stock-No. 1022-2375 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 3 A Year of manufacture 1989 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex site, loaded on truck Technical details: x-travel 400 mm y-travel 390 mm z-travel 350 mm Control DIALOG4/CONTOUR 3 tool taper SK 40 spindle turning speed range 31 - 3150 U/min feed range 10 - 2000 mm/min weight of the machine ca. 1,7 t dimensions of the machine ca. 1.600 x 2.500 x 2.000 mm Additional information: CNC control DIALOG4/CONTOUR 3 Table: 700 x 480 mm rigid angle table Swivel-type vertical milling head Coolant tank

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,900 h, travel distance X-axis: 635 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. • Supply voltage: 400 V, 3-phase + PE • Frequency: 50/60 Hz • Rated power: 35 kVA Djdoyycu Ropfx Affecf • Rated current: 64 A • Maximum current: 50 A • Control voltage: 230 V AC / 24 V DC

Condition: used, Year of construction: 1994, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, quill stroke: 80 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, workpiece weight (max.): 6 kg, Tool holder: 40 Magazine positions: 20 Machine weight: 3,200 kg Dimensions: Length: 2,740 mm Width: 2,660 mm Height: 2,140 mm Dodpfx Afsymc T Esfjcf Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and expert installation – all from one source. Billing according to individual terms and duration. Contact us for your personal offer.

Condition: used, Year of construction: 1989, functionality: fully functional, travel distance X-axis: 490 mm, travel distance Y-axis: 290 mm, travel distance Z-axis: 390 mm, Technical Data: Dsdpfx Aoymc Upsffecf Main Drive: Pole-reversible three-phase brake motor with right/left rotation ..... .. 2.0/4.0 kW 21 programmable spindle speeds ..... 25 ... 2500 rpm Tool holder in retractable quill . . . . . . NK40 Switch-operated tool clamp Feed Drive: Central DC motor with electromagnetic clutches ..... . ..... 1.4 kW (5Nm) Feed rate (programmable) ·· . . . . . . 5 ... 500 mm/min Feed correction ... ! . . ... . . . . . . from 20 to 120% Rapid traverse for X, Y, Z ..... ... . 1500 mm/min Travel range, motor/manual: X (longitudinal) . . . . . . . . . . . . . . . . . 490/500 mm Y (lateral) . . . . . . . . . . . . . . . . . . . . 290/300 mm Z (vertical) without bellows . . . . . . 390/400 mm with bellows . . . . . . . . . . . . . . . . . 345/355 mm + Vertical milling head on spindle carrier manually adjustable ..... ... ..... .. ... 200 mm Machine dimensions (min.) Length/Width/Height ..... . 1420x1290x1870 mm (see also foundation plan) Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert installation – all from a single source. Billing based on individual conditions and contract term. Contact us for your personal offer.

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm Dsdpeyxy Swjfx Affjcf - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Universal Tool Milling Machine DECKEL FP 4 MK With 3-axis active digital readout Heidenhain TNC 113 Year of manufacture: 1990 Travel range: X 500 Y 400 Z 400 mm Speed range: 50 – 2500 rpm Including the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Dcodsyycagspfx Affsf Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer Hydraulic tool clamping GRESSEL hydraulic vise 125 mm Various SK 40 milling arbors Splash guard enclosure Automatic central lubrication pump for X, Y, Z axes Machine lamp Coolant device 4 machine feet Operating manual

Condition: excellent (used), Year of construction: 1988, Tool grinding machine, manufacturer MICHAEL DECKEL, model S0, year of manufacture 1988. Comes with accessories and operating manual. In very good original condition. Dcodpjyxgm Isfx Affef Further data can be found in the specification sheet.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 14,018 h, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DECKEL DMU 60 E was manufactured in 1998. It features a spindle speed of 12,000 rpm and an impressive X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine includes a fixed angle table with a clamping surface of 1000 x 542 mm and a 25-position double gripper tool changer. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 60 E vertical machining centre we have for sale. Contact us for further details. • Operating hours (duty cycle): 35,214 h • Spindle hours: 14,018 h • Table type: Fixed angle table • Clamping surface: 1000 x 542 mm • Tool changer: 25-position, double gripper • Equipment: Electronic handwheel Dsdpfxjyxrtgj Affecf • Interfaces: RS-232 C / RS-422 • Power outlet: 230 V / 1 A • Condition: Guides replaced approx. 8 years ago; spindle in perfect working order • Can be powered up and tested

Condition: used, functionality: fully functional, Tool Grinding Machine Dcjdpfjyw N Tuex Affof Manufacturer: DECKEL, Model: S 1 Technical Details Manufacturer: DECKEL Model: S 1 Speed: from 3750 to 7500 rpm Connection: 380 V Machine weight: approx. 400 kg Dimensions (L x W x H): 1.2 x 0.70 x 1.40 m All information provided without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2004, Parts shown by hand not come. Dcedpfx Afoylykxefof

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Technical details are shown on picture. Dcsdpfx Aeyw Nausffef

Condition: good (used), Year of construction: 2004, Machine is good working condition. Djdpfeyufn Iex Affecf Control unit Heidenhain TNC 530 Parts shown by hand not come.

Condition: like new (used), Universal milling table is in very good condition. Dcedpfxjhtyxws Affef

Condition: good (used), Year of construction: 2009, Machine will come with robot . Djdpfx Asxfu S Neffjcf 42.000 rpm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: Dcedpeu Ivkgofx Affjf - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Technical data automation: - Available, on request.

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min Dsdpfx Ash Ty Hkjffjcf